BLINGER MORE FAB COMING SOON !!! (dont try this at home)

Started by Blingn, April 30, 2007, 07:45:45 PM

0 Members and 3 Guests are viewing this topic.

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

*FFC*

Quote from: unclejpl4x4 on May 25, 2007, 12:33:33 PM
:bumpinbutts:


I wish.  We spent all night in the hospital with his mother.  He didn't get home till 7:30 this morning.
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

79coyotefrg

:headscratch:  i  dont understand  why  you have that leg  so far out  at the top  and  so far in  at the bottom :headscratch:
and definetly  put  a  tube  on each side  of the back hoop  /\
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

skipnrocks

Any new updates?  And by updates I mean pics :red_eyes:     
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

unclejpl4x4

well i belive they ae at the moonrocks testing the truck   so the ? is when are they comingback
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

skipnrocks

Quote from: unclejpl4x4 on May 28, 2007, 05:46:22 AM
well i belive they ae at the moonrocks testing the truck   so the ? is when are they comingback


:ha_ha:   well lets hope for the best!!
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

BLACKDOG

Quote from: unclejpl4x4 on May 28, 2007, 05:46:22 AM
well i belive they ae at the moonrocks testing the truck   so the ? is when are they comingback

I don't think the jeep went.  I'm not sure, but I know that as of Thursday night, it wasn't close to even being ready to wheel.  Not very many finish welds, and the cage isn't done.  :dunno:  I didn't make it up to moonrocks, so I'm not sure if they took it or not
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

*FFC*

Nah, the Jeep didn't make it, and no update pics yet.  I'm sure we'll be back out there workin on it in a couple days after we recoup from this weekend. 
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

Blingn

No cage isnt done.  Mom in ER thursday at 8pm  I didnt get home till 730 am so we couldn't even get it close to safe and ready.  :shakehead: 

KINGSIZE


Blingn

:shakehead:  I havent touched it since before the moonrocks trip.  I was trying to make the trip but failed.  I hope to hit it up soon, but just going to clean welds and enforce what we have done so far and I promised FFC that we would concentrate on getting her Amigo ready for MCR so ???????  Thanks for your helpful info KINGSIZE!! :thumbs:

KINGSIZE

Quote from: BLINGN XJ on May 30, 2007, 09:19:39 AM
:shakehead:  I havent touched it since before the moonrocks trip.  I was trying to make the trip but failed.  I hope to hit it up soon, but just going to clean welds and enforce what we have done so far and I promised FFC that we would concentrate on getting her Amigo ready for MCR so ???????  Thanks for your helpful info KINGSIZE!! :thumbs:

Just let me know if i can help man. If i was closer id stop past to lend a hand!

iNfErNaL

WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

*FFC*

Quote from: Infernal on June 05, 2007, 12:55:50 PM
Any updates?  :dunno:

:headshake: we've been busy doin other :pokinit: but hopefully after payday we can get some wire for our :bling: new welder and we'll have updates :disturbed:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

BLACKDOG

Quote from: FordFreakChik on June 05, 2007, 01:17:08 PM
:headshake: we've been busy doin other :pokinit: but hopefully after payday we can get some wire for our :bling: new welder and we'll have updates :disturbed:

New welder!?!?!?!  :woohoo:  What'd ya get, what'd ya get??

I wanna come play!!! :flamer:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

snowshoebrue

hey matt if you wanted to build a trail up at justina's mom i can help just let me know

*FFC*

Quote from: BLACKDOG on June 07, 2007, 12:04:11 AM
New welder!?!?!?!  :woohoo:  What'd ya get, what'd ya get??

I wanna come play!!! :flamer:

You can come over any time :thumbs: Come by and take a looky at our new toy :eyebrow:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

iNfErNaL

WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

iNfErNaL

WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

DTB

no way that is bad ass looking..it dont even look like the same rig? new boggers, fool size axles, new bumper....any details on the buildup?
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

iNfErNaL

Quote from: DirToyBoy on June 08, 2007, 03:47:48 PM
no way that is bad ass looking..it dont even look like the same rig? new boggers, fool size axles, new bumper....any details on the buildup?
Not the same rig,just a thought,and some alcohol
WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

*FFC*

Quote from: DirToyBoy on June 08, 2007, 03:47:48 PM
no way that is bad ass looking..it dont even look like the same rig? new boggers, fool size axles, new bumper....any details on the buildup?

:rofl:
Quote from: Infernal on June 08, 2007, 03:50:24 PM
Not the same rig,just a thought,and some alcohol

That's alcohol talkin alright :hahaha:

Hopefully some day it'll look kinda like that :gap:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

Blingn

infernal has the axles picked up 35's but I have no doors ha ha thanks inferrnal :rofl: ohhhh yeah different paint scheme too  :shhh:

Geno

Quote from: BLINGN XJ on June 08, 2007, 04:16:00 PM
infernal has the axles picked up 35's but I have no doors ha ha thanks inferrnal :rofl: ohhhh yeah different paint scheme too  :shhh:


Is it pink? You gonna be bustin out some Cyndi Lauper?   :outtahere:
OFRD_GRL – as much as i appreciate strip clubs, i could never date a chic. they are all flopin crazy.

Blingn

:rofl2: naaaaaaahhhhhh youll see I got to get on it. I am laggin I think Ill do some work on it on sunday

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

mikerob

you ought to put renne to work now that shes there

BLACKDOG

:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

Blingn

Quote from: mikerob on June 11, 2007, 10:28:17 PM
you ought to put renne to work now that shes there

not a bad idea :rofl2: dude she cooked up some major grub dude OMG!!!! I am going to have pics tomarrow got the trailer moved got the welder fixed it is awn!!!