BLINGER MORE FAB COMING SOON !!! (dont try this at home)

Started by Blingn, April 30, 2007, 07:45:45 PM

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
User actions

*FFC*

#360
July 27, 2007, 09:28:27 AM
Quote from: BLINGN XJ on July 27, 2007, 09:27:36 AM
yeah it is honda seats and there is a crap load of brackets under there that jack it up in the air I think I am going to cut all the brakets out, and re work it.


:shake: jack up a perfectly good seat :smack:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

Cheesemaker

#361
July 27, 2007, 12:40:42 PM
Hey leave the smut for the bedroom!   :smooch:
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

79coyotefrg

#362
July 27, 2007, 12:49:10 PM
Quote from: BLACKDOG on July 23, 2007, 08:32:59 PM
:slap:  not that either.  Technically, its well pipe :gap:
you mean its not schedule 40 :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

#363
July 27, 2007, 05:41:54 PM
:popcorn:

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

BLACKDOG

#364
July 27, 2007, 06:29:08 PM
Quote from: 79coyotefrg on July 27, 2007, 12:49:10 PM
you mean its not schedule 40 :dunno:

No it is. I made sure of that at least.  It is the same material my sliders are out of.  :thumbs:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

Blingn

#365
July 27, 2007, 06:34:51 PM
it is just as tough as the other steel that is welded to the bar going across the dash!! Just as tought to bend and it welds good together!! thanks BLackdog wait you are supposed to be here right now?  GET UR :moon: over here so you can get to :whip:

Blingn

#366
July 28, 2007, 02:42:34 PM
We are in the middle of the project right now and i have never had such great friends in all my life thanks guys and gals...

mikerob

#367
July 28, 2007, 07:04:20 PM
howd you all do today,  get a lot done???

MiniSimp

#368
July 28, 2007, 08:24:27 PM
Quote from: BLINGN XJ on July 28, 2007, 02:42:34 PM
We are in the middle of the project right now and i have never had such great friends in all my life thanks guys and gals...
Dave must not have shown up... :greengrin:
Glad you had a good day of work!
I would have come but had committed to my cousin's sons 2yr old birthday party...fun fun.

*FFC*

#369
July 28, 2007, 08:44:41 PM
Quote from: MiniSimp on July 28, 2007, 08:24:27 PM
Dave must not have shown up... :greengrin:
Glad you had a good day of work!
I would have come but had committed to my cousin's sons 2yr old birthday party...fun fun.


WOWWWWOWOWOOWOWOWOWWWW We got SO much accomplished today.  Dave (OYCJ), Justin (Snowshoebrue), and BLACKDOG came out today.  They hit the Jeep full force early (well, around 9.).  Me and MRsOYCJ went to PnP to find a starter for the Migo, but they didn't have one :down: So we came back home and the guys were still diligently welding/grinding/fabbing.  So I started flipping the leafs on the Migo and realized I needed some new shackle bolts.  So we went to Lowes : :thumbdown: and they didn't have any bolts near big enough.  So we had to cruise around and find OSH.  We got the bolts then went home, had lunch ::) then finally got the leafs done.  The guys finished the front of the cage and the front bumper, BD did some beautiful touch up/capping work :yupyup: And I'll let the boys post the pics :disturbed:  :yawn:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

unclejpl4x4

#370
July 28, 2007, 09:13:56 PM
wish i could help :down:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Blingn

#371
July 28, 2007, 09:48:04 PM
Man what a day!!! These guys were non stop.  I just cant believe how good of a job and how much work each and everyone did.  I tried to have as much as I could done before they got there but my welds and work were of no comparision to the amount of work and quality that these guys did.  I hope to return the favor to each and everyone of you.  I had a great day with all of you.  (yes even oycj) ha ha. 

Duffil

#372
July 28, 2007, 09:50:05 PM
:worthless:

Blingn

#373
July 28, 2007, 09:54:03 PM
Ok here how the project started. Jay spent the night and we welded a little on the cage and J started to cap the sharp edges that the rear c pillar left when we cut them off



*** YELLER ***

#374
July 28, 2007, 09:59:02 PM
OK you asked fer it  :biggthumpup: :disturbed:


Dude I have 77 pics. you get all of them that I see fit to post  :rofl2:





:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

unclejpl4x4

#375
July 28, 2007, 10:00:07 PM
all i see is :moon:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

*** YELLER ***

#376
July 28, 2007, 10:05:19 PM
 :biggthumpup:







:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Duffil

#377
July 28, 2007, 10:05:44 PM
77pics and only 4 are good...what a gyp... :greengrin:

*** YELLER ***

#378
July 28, 2007, 10:10:19 PM
 :disturbed:

Im not done  :slap:



:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

*** YELLER ***

#379
July 28, 2007, 10:14:16 PM
 :thumbs:




:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Blingn

#380
July 28, 2007, 10:16:18 PM
then the mad scientist and lovely wife came over and woke us up.  He then went out with a hammer and started to slam my welds found some that needed help and gave me some knowledge, this guy was a machine didnt stop all day!!





*** YELLER ***

#381
July 28, 2007, 10:18:34 PM
 :thumbs:




:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

*** YELLER ***

#382
July 28, 2007, 10:21:58 PM
Do we want to see the paint job ???  :dunno:



:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Blingn

#383
July 28, 2007, 10:22:38 PM
then justin came by and did a number on the front bumper reinforcement!! I was in aww of how good his welds looked and I loved the idea of the extra support to the edge of the push bumper :thumbs:



*** YELLER ***

#384
July 28, 2007, 10:25:45 PM
 :thumbs:

A good artist always sighns his work  :disturbed:



:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Blingn

#385
July 28, 2007, 10:30:27 PM
then J and I wnt to bending the rear tube



J thru down some excelent fab work this is him getting the rear section cut

*** YELLER ***

#386
July 28, 2007, 10:30:47 PM
PAINT    TIME    :biggthumpup:





:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Blingn

#387
July 28, 2007, 10:34:13 PM
I had to keep the gang feed so they wouldn't stop kickin :moon: and taking names

*** YELLER ***

#388
July 28, 2007, 10:36:09 PM
 :yupyup:




:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Blingn

#389
July 28, 2007, 10:36:27 PM
here is justin finishing the bumper's finish touches after he signed it

Print
Go Up Pages 1 ... 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
User actions