Front Bumpers and Cab Cages!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[BigMike]

Ok, here is another version of the stinger supports, which are shorter and now I actually do like this look better than the straight ones. This bumper also has an optional front receiver mount.

doesnt look like it will accept a roller fairlead.

This is correct, and our old bumper also only accepts a hawse fairlead.

Here are some close ups of the new 10-point bolt locations (only one side shown for detail).

A couple more upgrades have been done to these prototypes including a couple more triangle brackets for added strength.

[Talon84x4]

I like the shorter bar look than the longer 

Looks sweet 

[*ROKTOY*]

Still like the single bend stinger with straight supports. The ten bolts look good, but I think it still needs more support higher behind the winch plate.

[82toycrawler]

Does look a little better, still like the old stinger better.

The mounts look nice, should work well.

[twistedtoy92]

looks sweet... might like the old stinger better though!

[cheap sunglasses]

x5 (or whatever) for the old stinger looking best. Between the two new ones the shorter supports look better.

[unclejpl4x4]

wow

[rlwjaw]

.
This is correct, and our old bumper also only accepts a hawse fairlead.


I was told on the phone that they would accept a roller fairlead. Can they be made to accept one?

[havik]

iam not diggin the bent supports. maybe if they came out more to protect the grill corners and headlights but where they are they dint seem to serve enough purpose. i think straight would be better.

[www.fullsize4wd.com]

Any plan to offer a version that supports body lifts? Mainly a 1" but still keep really close to the grill and fenders.

[TurtleTappers91]

Damn, still no cab cages?
looks like I'm buying it from All Pro...

[guywithuglyyota]

Damn, still no cab cages?
looks like I'm buying it from All Pro...

BUT I WANT A GOLDEN GOOSE NOWWWW!!!!!

[CruzrDave]

.
This is correct, and our old bumper also only accepts a hawse fairlead.


I was told on the phone that they would accept a roller fairlead. Can they be made to accept one?

We tried to keep everything tucked up tight. The roller fair lead sticks out farther and does not usually survive a rock beating to well.

Any plan to offer a version that supports body lifts? Mainly a 1" but still keep really close to the grill and fenders.

We have tried to maintain 1/2" of tube clearance around the head light bezel. How ever we have noticed that not one truck is the same. There is a large amount of tolerance in the Toyota bracketry for the stock bumper. We have had to maintain some tolerance. We have different tube length for different years so we could possibly build you a 1" taller bumper but that would be the maximum. We have also stacked an extra 1-3/4" main tube to help hide the gap on a 2" body lift truck. These are possible options we could do. Because we do not farm these out to 3rd world counties we can offer some customizing.

We have will be using the straight support tubes for the hoop. We have also finished the 1984-1985 brackets and an extra support gusset that we be used on all the front bumpers.

Damn, still no cab cages?
looks like I'm buying it from All Pro...

We had to put the Cage kits on the back burn the last few weeks to finish the front bumper designs and brackets. We are back on the cage design and I hope to have a finished sample by the end of the this week. Oh, did I mention that we plan to sell them for $299!

[unclejpl4x4]

So when will the bumpers go on mass produce   I real  would like one.

[Fearofrunner]

so are you guys going to stay with the rounded front supports?  Because i have to agree with these guys the shape just isn't as appealing to me.

[unclejpl4x4]

i like it   i also like the reciver  perfice place for my   cargo rack/cooler

[Talon84x4]

We have will be using the straight support tubes for the hoop. We have also finished the 1984-1985 brackets and an extra support gusset that we be used on all the front bumpers.

[*ROKTOY*]

What about the hoop it self?

[TurtleTappers91]

We had to put the Cage kits on the back burn the last few weeks to finish the front bumper designs and brackets. We are back on the cage design and I hope to have a finished sample by the end of the this week. Oh, did I mention that we plan to sell them for $299!

$100 bucks cheaper than the AllPro cage? It is worth waiting for a while I guess, I will gladly pay $299.  I know you don't like giving ETA's , but I don't want to wait 6+ months like I did with the front bumper....How long after you guys approve the sample or whatever, is it going to take? be realistic please.

[Wermz84]

We had to put the Cage kits on the back burn the last few weeks to finish the front bumper designs and brackets. We are back on the cage design and I hope to have a finished sample by the end of the this week. Oh, did I mention that we plan to sell them for $299!

That is an awsome price.     but some of are waiting on the word for an X-tra cab option. 

[Rockcrawlintoy]

We had to put the Cage kits on the back burn the last few weeks to finish the front bumper designs and brackets. We are back on the cage design and I hope to have a finished sample by the end of the this week. Oh, did I mention that we plan to sell them for $299!

sweet thats what i am talkin about.

[BLACKDOG]

That is an awsome price.     but some of are waiting on the word for an X-tra cab option. 

  some people have big plans hinging on this cage



3rd gen xcab

[*ROKTOY*]

What about the hoop it self?

[Talon84x4]

Could we get just a bumper without stinger?

Like this?

[cheap sunglasses]

Could we get just a bumper without stinger?

Pretty sure the stinger has always been an added option.

[BLACKDOG]

Could we get just a bumper without stinger?

Like this?

the stinger is a $75 option

[Talon84x4]

Sweet, thanks  , i'll let my buddy know

[Aaron84x4]

so.....any word on the roll cages yet?

I'm dyin to see the new design, especially for that awsome new price!

[rlwjaw]

Do we have a shipping date on the bumpers yet?

[havik]

what about selling unwelded bumpers as a kit? how much would that cost?