Arkansas / Texas / Oklahoma area "Friends of Marlin"

Started by 79coyotefrg, September 25, 2006, 12:09:20 PM

0 Members and 3 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4 5 6 7
User actions

79coyotefrg

#60
November 22, 2006, 09:29:29 PM
well we finally got home,  Brandon  from  just up the road  came  to the rescue  :love:

more  info  coming soon :goodnight:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

alwayzbroken

#61
November 22, 2006, 09:42:55 PM
If it was a chevrolet it wouldn't have broke
If you still have control you aren't going fast enough

red

#62
November 22, 2006, 10:01:13 PM
Quote from: alwayzbroken on November 22, 2006, 09:42:55 PM
If it was a chevrolet it wouldn't have broke
same as a gmc. curious what happened though, chevy/gmc trucks are not known to die, they're basicly the larger version of a toyota.
read and comment :whip:

USAF EOD tech

Gittinit

#63
November 23, 2006, 12:27:31 AM
Quote from: 79Coyotefrg on November 22, 2006, 09:29:29 PM
well we finally got home,  Brandon  from  just up the road  came  to the rescue  :love:

more  info  coming soon :goodnight:

I have some parts if it will help! let me know.
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#64
November 23, 2006, 06:20:08 AM
we was on our way to Dads grave  at the Veterans  cemetery,  to visit with him, but i missed the exit,  so  went on to the next exit,  just befor it  the jimmy started slowing down,  i checked the guages  and all looked great, 50psi oil pressure  190*  on the temp,  but it was still slowing   got over to the shoulder  but still gauges were good  then the engine light started flashing ,no smoke or weird noises at all,  then it died,  i checked the oil  and it  wasnt on the stick,  put 3 qts in  on the side of the road,   and  it started finally  but was knocking bad,  got off the road  and into macdonalds
after  sitting for about  2 hours  i checked the oil and it was WAY over full  :headscratch:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#65
November 23, 2006, 06:25:00 AM
the only thing  i can think of  is  maybe  the  lifter vally  got cloged with sludge   and  kept the oil from returning to the pan  causing the motor to run  without oil   
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#66
November 23, 2006, 07:37:05 AM
Sounds like all the oil was ar the top of the motor.  The drain ports in the head are small and whith a little gunk/buildup up there they get cloged easily. Sounds like a crank and bearings and mabye a timing chain set then it will be good to go. You will be cusing that thing whishing it was a (22r) toyota, becouse those motors are in there pretty tight.
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#67
November 23, 2006, 07:57:12 AM
yea  :ack:


maybe i should  take the front clip off
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#68
November 23, 2006, 07:58:54 AM
Quote from: 79Coyotefrg on November 23, 2006, 07:57:12 AM
yea  :ack:


maybe i should  take the front clip off
That would be a good idea!
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#69
November 23, 2006, 08:06:06 AM
it has metal shavings  in the oil  so  :thud:   im thinking  a long block,  the dealer said  if i did the work  he would buy the parts  :eyebrow:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#70
November 23, 2006, 09:10:41 AM
Quote from: 79Coyotefrg on November 23, 2006, 08:06:06 AM
it has metal shavings  in the oil  so  :thud:   im thinking  a long block,  the dealer said  if i did the work  he would buy the parts  :eyebrow:
I need to buy from this dealer! wow I can hardly belive that!
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#71
November 23, 2006, 10:21:18 AM
Quote from: gittinit on November 23, 2006, 09:10:41 AM
I need to buy from this dealer! wow I can hardly belive that!
ive dealt with this guy ALOT  and sent him customers.

when the  intake thing broke  last month he paid for all that to be fixed,  but  i told Mom  i wanted to know its done right
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

alwayzbroken

#72
November 23, 2006, 10:36:50 AM
What year truck Glen?
If you still have control you aren't going fast enough

79coyotefrg

#73
November 23, 2006, 10:46:49 AM
its a 96  GMC Jimmy,  4.3  auto 4x4

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Lady Di

#74
November 23, 2006, 01:24:28 PM
Nice Glen. Sux you have to deal with it but sounds like the dealer will treat you right.
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

79coyotefrg

#75
November 23, 2006, 04:43:30 PM
Quote from: MrsWillyMammoth on November 23, 2006, 01:24:28 PM
Nice Glen. Sux you have to deal with it but sounds like the dealer will treat you right.
hes a really great guy,  i try to help him  with some mechanical stuff sometimes when i can
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

blackwolf00

#76
November 23, 2006, 07:31:20 PM
yeah he does
They invade our space, and we fall back. They assimilate entire worlds, and we fall back. Not again. The line must be drawn here! This far, no further! And I will make them pay for what they've done!
Picard about the Borg.

79coyotefrg

#77
November 24, 2006, 12:47:46 PM
well, i talked to him this morning,  he  had a 97 jimmy  towed in yesterday  that was smacked on the front end,   he is going to  have it  sent out here to the house  and i can have whatever i need from it,   engine  tranny  whatever i want to  use :woohoo:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#78
November 24, 2006, 12:49:05 PM
and  thats good  cause   i need a drivers side  mirror
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#79
November 24, 2006, 05:16:37 PM
Quote from: 79Coyotefrg on November 24, 2006, 12:49:05 PM
and  thats good  cause   i need a drivers side  mirror
Quote from: 79Coyotefrg on November 24, 2006, 12:47:46 PM
well, i talked to him this morning,  he  had a 97 jimmy  towed in yesterday  that was smacked on the front end,   he is going to  have it  sent out here to the house  and i can have whatever i need from it,   engine  tranny  whatever i want to  use :woohoo:

SCORE!!!!  I want the harness and computer.  Just kidding!
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#80
November 24, 2006, 07:14:37 PM
Quote from: gittinit on November 24, 2006, 05:16:37 PM
SCORE!!!!  I want the harness and computer.  Just kidding!
the engine harness  :headscratch:   

hmmm  not sure if i can do that but if i can i will :thumbs:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#81
November 24, 2006, 07:16:03 PM
i hope it has different wheels  i dont like this things 15x7's  with 6 inch backspacing  :ack:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

red

#82
December 10, 2006, 10:32:08 AM
thats horrible backspacing!

have any of yall ever looked at the price of old man emu lift kits for an fj 60/62 land cruiser? WOW!!!! for the load capacity i'd need, their medium to heavy, its just over 1600 bucks. i know its quality built like marlin crawler, but wow. reason i ask is because my dad found an 87 land cruiser at a dealership up in utah that is asking about 3k for it. if its still there after christmas (while i'm up there) then i'll see if maybe i can do a trade for my suburban.
read and comment :whip:

USAF EOD tech

79coyotefrg

#83
December 10, 2006, 10:57:18 AM
i can build you some springs  :deal:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

alwayzbroken

#84
December 10, 2006, 11:00:55 AM
Quote from: 79Coyotefrg on December 10, 2006, 10:57:18 AM
i can build you some springs  :deal:

Glen will do it for 1400$
If you still have control you aren't going fast enough

red

#85
December 10, 2006, 12:33:58 PM
Quote from: alwayzbroken on December 10, 2006, 11:00:55 AM
Glen will do it for 1400$
no, not 1400 for springs lol. that includes the shackle change or whatever you call it, where the front shackles are moved to the rear of the springs. brake lines, shocks, whole 9 yards. if i get this landcruiser i'm aiming for 4-6" of lift, so make sure their flexy springs glen! i'll let yall know if i get the truck and when i've got some money for a lift.
read and comment :whip:

USAF EOD tech

79coyotefrg

#88
December 16, 2006, 01:49:21 PM
you gonna buy that for my Christmas present  :hyper:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#89
December 16, 2006, 02:59:24 PM
well UPDATE

the  donor  truck DOES  have  4 inch backspaced wheels,  well 3 of them anyway

sorry Michael,  he wants it back  :down:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way
Print
Go Up Pages 1 2 3 4 5 6 7
User actions