Author Topic: tranny removal???? (Read 2324 times)

n.c.84 · « **on:** Sep 14, 2006, 04:33:19 PM »

trying to pull my transmission in my 84 toy pu 4x4. the bolts on top of the bell housing are difficult to get to. even when the tranny is dropped down. any ideas on how to get these last two bolts out? thanx.

jimbo74 · « **Reply #1 on:** Sep 14, 2006, 04:35:39 PM »

my truck had a bodylift and i jsut reached down and slowly turned with a ratchet....

my truck hasnt always had a bl though, and when i dropped the tranny before, i actually used a wobble on a ratchet with 3 feet of combined extensions, basically at an angle to where i was near the driveshaft

BUBBA · « **Reply #2 on:** Sep 14, 2006, 04:46:20 PM »

you can get them with a wrench from the top,but a wobble socket would work better

Marlin · « **Reply #3 on:** Sep 14, 2006, 09:06:30 PM »

17 mm universal socket and a loooong extension.

We use a snap on 1/2" to 3/8" extension 36" long.

snowshoebrue · « **Reply #4 on:** Sep 15, 2006, 04:17:31 PM »

i used a bunch of extensions put together with a wobble in the middle and a knuckle on the end. that way it would sort of arc over the top of it.

notajeep · « **Reply #5 on:** Sep 15, 2006, 05:32:07 PM »

That is pretty much what I did.

79coyotefrg · « **Reply #6 on:** Sep 15, 2006, 06:52:48 PM »

i usually do the wrench from the top method

Hottrod81 · « **Reply #7 on:** Sep 15, 2006, 07:26:16 PM »

I am taking one out tomorrow. I will let you all know how I got it done.

Tool Pimp · « **Reply #8 on:** Sep 15, 2006, 09:46:43 PM »

Quote from: Marlin on Sep 14, 2006, 09:06:30 PM

17 mm universal socket and a loooong extension.

We use a snap on 1/2" to 3/8" extension 36" long.

Strap-On kills!!!!

Author Topic: tranny removal???? (Read 2324 times)

n.c.84

tranny removal????

jimbo74

Re: tranny removal????

BUBBA

Re: tranny removal????

Marlin

Re: tranny removal????

snowshoebrue

Re: tranny removal????

notajeep

Re: tranny removal????

79coyotefrg

Re: tranny removal????

Hottrod81

Re: tranny removal????

Tool Pimp

Re: tranny removal????

Related Topics


	Author Topic: tranny removal???? (Read 2324 times) 0 Members and 1 Guest are viewing this topic. n.c.84 Rock Crawl'n Turtle Points: 15 Posts: 41 Member since Jun '05 Crawling with Marlin tranny removal???? « on: Sep 14, 2006, 04:33:19 PM » trying to pull my transmission in my 84 toy pu 4x4. the bolts on top of the bell housing are difficult to get to. even when the tranny is dropped down. any ideas on how to get these last two bolts out? thanx. Logged jimbo74 Gold Turtle Award Turtle Points: 2872 Posts: 8,707 Member since Sep '05 Re: tranny removal???? « Reply #1 on: Sep 14, 2006, 04:35:39 PM » my truck had a bodylift and i jsut reached down and slowly turned with a ratchet.... my truck hasnt always had a bl though, and when i dropped the tranny before, i actually used a wobble on a ratchet with 3 feet of combined extensions, basically at an angle to where i was near the driveshaft Logged The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission. ~ John F. Kennedy ~ BUBBA The 1K Club Turtle Points: 16 Posts: 1,138 Member since Mar '05 this sucks Re: tranny removal???? « Reply #2 on: Sep 14, 2006, 04:46:20 PM » you can get them with a wrench from the top,but a wobble socket would work better Logged 87 4runner 350 with custom dent package. My budget beater Marlin Inspirational Genius 4WD Legend Turtle Points: 138 Posts: 856 Member since Sep '02 MC³ = 1,148:1 Re: tranny removal???? « Reply #3 on: Sep 14, 2006, 09:06:30 PM » 17 mm universal socket and a loooong extension. We use a snap on 1/2" to 3/8" extension 36" long. Logged 1980 Toyota - 1997 3RZ-FE 2.7l Engine, Turbo R151F 4.31:1, Triple Turbo Marlin Crawler Billet (2.28x4.70x4.70) = 1,148:1 Crawl Ratio, Marlin Crawler Twin Stick and Short Throw Shift Kits, 30mm H/D Output Shaft, High Angle Drive Lines, 5.29:1, ARBs, High Pinion Front, 25mm HD Billet High Steer Kit, 6 Pin Locking Hub Bodies, 86+ Wide Rear End, V6 3rd member, Chromolly Axles all around, 37" IROKs with Beadlocks, York onboard air - Rollbar air tank, Premier Power Welder, Marlin Crawler 4" USA-made Leaf Springs, Bilstein Shocks, et cetera.... snowshoebrue The 1K Club Turtle Points: 447 Posts: 1,152 Member since Jun '05 Crawling with Marlin Re: tranny removal???? « Reply #4 on: Sep 15, 2006, 04:17:31 PM » i used a bunch of extensions put together with a wobble in the middle and a knuckle on the end. that way it would sort of arc over the top of it. Logged notajeep Crawler Guru Turtle Points: -108 Posts: 703 Member since Oct '04 Crawler #3289 Re: tranny removal???? « Reply #5 on: Sep 15, 2006, 05:32:07 PM » That is pretty much what I did. Logged You have a Jeep? That's cute.... So does Barbi. 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: tranny removal???? « Reply #6 on: Sep 15, 2006, 06:52:48 PM » i usually do the wrench from the top method Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way Hottrod81 The 1K Club Turtle Points: -2 Posts: 1,392 Member since Feb '05 Full Trucker Effect Re: tranny removal???? « Reply #7 on: Sep 15, 2006, 07:26:16 PM » I am taking one out tomorrow. I will let you all know how I got it done. Logged My 4Runner Build Tool Pimp The 1K Club Turtle Points: 0 Posts: 1,399 Member since Jun '06 Re: tranny removal???? « Reply #8 on: Sep 15, 2006, 09:46:43 PM » Quote from: Marlin on Sep 14, 2006, 09:06:30 PM 17 mm universal socket and a loooong extension. We use a snap on 1/2" to 3/8" extension 36" long. Strap-On kills!!!! Logged The Bee Build... http://board.marlincrawler.com/index.php?topic=35156.0