Author Topic: The Official "To Do" list before MCR5 (Read 18312 times)

krawlz · « **Reply #60 on:** Jun 07, 2006, 07:43:38 PM »

Sweet! Complete with Bling shift knob.

Lets see, Whats next?

36x13.50/15 IROC's
4.70 Gear Set, and rear wheel disconnect.
exo cage.
More power for the hills.

Well, maybe next year.

krawlz · « **Reply #61 on:** Jun 07, 2006, 07:46:05 PM »

Quote from: krawlz on Jun 07, 2006, 07:43:38 PM

Sweet! Complete with Bling shift knob.

Lets see, Whats next?

36x13.50/15 IROC's
4.70 Gear Set, and rear wheel disconnect.
exo cage.
More power for the hills.

Well, maybe next year.

zeke jr. · « **Reply #62 on:** Jun 07, 2006, 10:53:07 PM »

here it is:
lockers f/r
gears
tires
hy-steer
working my minimum wage job...ouch looks like ill be working lots of overtime.

unclejpl4x4 · « **Reply #63 on:** Jun 20, 2006, 05:25:46 PM »

1. fill out form check
2. get plane tickets check

im ready

Willy Mammoth · « **Reply #64 on:** Jun 20, 2006, 05:45:49 PM »

1. Make larger fuel tank.
2. finish rear cage mounts and top.
3. Install shoulder harnesses.
4. Install air compressor after rebuilding it.
5. Change gears back to 5.29's again.
6. Redo E brake setup that got removed when installing duals.
7. Modify injection pump so the skinny pedel connects to it instead of the throttle plate.
8. Make deck and tool box.
9. ~~Build PTO driven trailer~~ won't have time, still haven't made custom T case to drive it anyway.
10.

I am sure there is something.

KYOTA · « **Reply #65 on:** Jun 20, 2006, 06:59:41 PM »

Quote from: unclejpl4x4 on Jun 20, 2006, 05:25:46 PM

1. fill out form check
2. get plane tickets check
im ready

cancel tickets and reorder for the correct dates

KYOTA · « **Reply #66 on:** Jun 20, 2006, 07:03:49 PM »

Quote from: KYOTA on Jun 05, 2006, 01:36:58 PM

flatbed -check
need to mount propane tanks and screw the skins down. still working on the Dodge, if all else fails I'll milk that POS Chevy over Shasta on more time.

OK flatbed is done, tanks are mounted up, Hydro assist works awesomely and new CB gear installed. Still need to install new deck (last one got tired of running on beer and dust) and add a sub and I'll be ready to rock, literally

gotrocks · « **Reply #67 on:** Jun 21, 2006, 07:40:32 AM »

To do:
1.Build rear bumper
2.Do finishing toches on front bumper
3.Cryo new set of 5.29's for front diff (got a v6 pod with ARB) CHECK
4.New ARP studs for hub and add more 4 new dowl studs
5.ARP steering studs
6.New rear shocks mounts
7.Install new front High Angle Driveline
8.Full ext. cage

Want to do:
1. Build my SN-Fab buggy.

I don't know if I will be able to get it done by then but I'll sure try. I will only get it back from then 3 weeks before the roundup and I will be working my tail off to try and get it put together by then. If not I will just bring the runner. It's worth of the rubicon I think now.

unclejpl4x4 · « **Reply #68 on:** Jun 22, 2006, 09:18:56 AM »

Quote from: KYOTA on Jun 20, 2006, 06:59:41 PM

cancel tickets and reorder for the correct dates

CHECK

Ramrod · « **Reply #69 on:** Jun 22, 2006, 09:26:15 AM »

Quote from: TEAM RAMROD on Jun 05, 2006, 05:44:15 PM

my list of things to do before the mcr4 is to not ruin my truck in the 15 or so other con and 4dyce trips this summer before then

already screwed that up so now it is replace my chevy rears and hope to not trash the new ones before then

RHG · « **Reply #70 on:** Jul 27, 2006, 11:13:47 AM »

Ya you didnt do very good with that did ya? I want to run fordyce again...you up for it? muahahaha. I want to try winch hill 1 this time.

Ramrod · « **Reply #71 on:** Jul 27, 2006, 07:06:35 PM »

yeah I messed that one up didnt I. Hell yeah i'm up for fordyce again. We (brad, kent, and I) were talking of a run all the way through to meadow lake in the near future. And yes you need to hit winch hill 1

Hyena · « **Reply #72 on:** Aug 01, 2006, 09:57:02 PM »

Quote from: Hyena on Jun 06, 2006, 04:00:44 PM

Well, i just need to get my temp gauge in and throw in some injector cleaner. fix my rear rock lights woring thing. Then i just need to buy a trailer and i will be set. Unless i break something before then which i don't plan to do.

Well, looks like i need to replace the broken gears i didn't plan onm breaking before the round-up. i just got them from UPS today so in the next couple of weeks it should be driveable again. and i got the temp gauge in, fixed the rock lights, dovetailed my bed, built a sick tail gate, and broke my windshield. i actually did a lot of things i didn't plan on doing.

*FFC* · « **Reply #73 on:** Aug 02, 2006, 06:15:48 PM »

Well, my budget hasn't allowed me to do jack to the Migo lately. It's been sitting since the Moon Rocks run Memorial Day

I finally got some springs to eliminate the blocks today finished that project up.

Hopefully I can get these 3 done before the roundup... I highly doubt it though $I\'m Down$

*wheel spacers (buy and install)
*clutch (buy and install)
*rock lights (I have em I just have to take the time to put em in)

toybuilt · « **Reply #74 on:** Aug 06, 2006, 07:13:43 PM »

Lets see here;

1) build croosmember for transfer case
2) order fan for engine
3) put an exhaust on
4) order driveshafts
5) install gas tank
6) install wiring harness
7) all the little things I forgot
8) fill up all the fluids and fire my truck up

BLACKDOG · « **Reply #75 on:** Aug 07, 2006, 12:04:27 AM »

As it sits right now

I NEED TO:
1. Built front d-shaft
2. Build rear bumper/attachment point
3.stock up on spare IFS parts
4.Buy new towstrap, hilift
5.buy/install crossmember
6.fix parking brake
7. get new battery cable

I WANT TO:
1. finish half doors (doing that this week)

2. paint
3. install CB and mount antenna
4. spare holder

snowshoebrue · « **Reply #76 on:** Aug 07, 2006, 03:11:51 PM »

build f/r spare drivelines
move drop hanger forward
remove birf i broke yesterday and install my longs
buy cb
stock up on spare stuff

Geno · « **Reply #77 on:** Aug 07, 2006, 06:06:58 PM »

1. Remove my supercharger

2. Find rear 4runner seat
3. Move my fuel cell so I can put in rear seat
4. Replace broken windshield
5. Replace rear break lines
6. Find a spare MTR 37x12.50-15

Lady Di · « **Reply #78 on:** Aug 07, 2006, 06:29:26 PM »

1. PANIC

unclejpl4x4 · « **Reply #79 on:** Aug 08, 2006, 01:58:40 PM »

Quote from: MrsWillyMammoth on Aug 07, 2006, 06:29:26 PM

1. PANIC

"don't panic"

LILGREENYOTA · « **Reply #80 on:** Aug 08, 2006, 10:16:02 PM »

HMMM MY TO DO LIST
-PUT ON TRAILER AND GO (GOTTA LOVE CHROMO 60'S AND HYDRO STEER)

Yota4life · « **Reply #81 on:** Aug 15, 2006, 11:25:13 AM »

Took my rig to the con this last weekend finally. So now i have some things to improve. Didnt break once on the trip!

Finish half doors (pita to make)
Bob bed 8-10 inches
cut and remount rear bumper
Trim rear fenders
Then paint whole truck so its one color
Trim firewall clearence for tires
Fix leakes in On board air
Try to finish rear traction bar
Get some grab handles for passenger

i got lots of work!! ahhh

Hyena · « **Reply #82 on:** Aug 15, 2006, 03:21:10 PM »

Quote from: Yota4life on Aug 15, 2006, 11:25:13 AM

Took my rig to the con this last weekend finally. So now i have some things to improve. Didnt break once on the trip!

Finish half doors (pita to make)
Bob bed 8-10 inches
cut and remount rear bumper
Trim rear fenders
Then paint whole truck so its one color
Trim firewall clearence for tires
Fix leakes in On board air
Try to finish rear traction bar
Get some grab handles for passenger

i got lots of work!! ahhh

I thought i saw your toy up there. you were right before Gatekeeper when me and 3 others were walking into the trail with backpacks.

Yota4life · « **Reply #83 on:** Aug 16, 2006, 08:54:09 PM »

Quote from: Hyena on Aug 15, 2006, 03:21:10 PM

I thought i saw your toy up there. you were right before Gatekeeper when me and 3 others were walking into the trail with backpacks.

Was it friday night or saturday? I was there till like 4 on saturday then headed home. You shoulda stoped by and said hi

Hyena · « **Reply #84 on:** Aug 17, 2006, 05:23:29 PM »

it was saturday noon time.

Yota4life · « **Reply #85 on:** Aug 18, 2006, 11:46:44 AM »

Ya im sure you saw me. Did you see the guy with the first gen that rolled on the slabs? It wasent very bad just a flop plus he had an exo. I was with a jimmy/truggy on full widths

Hyena · « **Reply #86 on:** Aug 19, 2006, 12:09:33 AM »

nope, didn't see the toy flop. I did see a Jeep roll all the way over on the slabs coming out sunday.

BLACKDOG · « **Reply #87 on:** Aug 20, 2006, 07:09:07 PM »

Quote from: BLACKDOG on Mar 29, 2006, 12:58:26 PM

1. duals
2. driveshafts
3. half doors (have the doors, just need to cut them)
4. rear bumper
5. SA (need to clean up, rebuild, install, regear, and lock)not doing
~~6.collect some spare parts~~
7. Knowing my luck, probably find another 3.0 and drop it in so I can go
8. rocklights

*FFC* · « **Reply #88 on:** Aug 22, 2006, 03:39:27 PM »

Quote from: FordFreakChik on Aug 02, 2006, 06:15:48 PM

*~~wheel spacers (buy~~ and install)
*clutch (buy and install)
*~~rock lights~~ (I have em I just have to take the time to ~~put em in~~)

*~~Rear leafs~~
*Cut out firewall in front so my tires don't rub on 2" of flex

RHG [OP]

Related Topics