Snow White- 85xtracab Build

Started by Matty, July 17, 2005, 02:19:20 PM

0 Members and 4 Guests are viewing this topic.


79coyotefrg

didnt you drive it to school?
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Matty

couldnt drive it to school, well i guess i couldve but that wouldve been crazy.  i wouldnt trust it, and first year here across the country i need to adjust to everything for now.  next summer i will have an 03 4runner and my white truck out there. but yea :beerchug:

Matty

well ive finally settled into school.  i joined the 4wheeling club and i got to go on a trip to Lefthand, and Carnage.   it was a blast im lovin the colorado wheelin so far.  anyways i have been looking at trucks out here.  i am looking to buy an 86-88 xtracab, and SAS it and the works yada yada.  there are so many rust free clean ones here i cant pass up.  i am going to part my 85 out after wheelin it next summer and use its parts to build the new truck.  the 85 has to many frame patches and rust that i just dont want to deal with anymore.  which leads me to my next question.

i am going to wheel the 85 hard next summer, and i had a lot of close callls this past summer so i definitely want at least an in cab cage.  i have been looking at marlins, and all pros, and EOR off pirates.  my question is, as they are can they take major rolls?  or are they made to just take flops?  also do people usually get them and add more braces like around the windshield and behind the seats?  just trying to get an idea about the cages.  thanks for any info  :beerchug:

KDC

Nice dude!  Welcome to CO!

If you don't already know, www.colorado4x4.org has a lot of good trail info.  The Trip Reports section usually has some pretty good pictures.


Matty

Quote from: KDC on September 06, 2006, 07:45:03 PM
Nice dude!  Welcome to CO!

If you don't already know, www.colorado4x4.org has a lot of good trail info.  The Trip Reports section usually has some pretty good pictures.


thanks.  im lovin Colorado so far.  i just joined colorado4x4.org as well, and i posted up in the wanted section about an 86-88 stock xtracab if you happen to see any.

Matty

Quote from: 85xtracab on September 06, 2006, 03:55:52 PM
i am going to wheel the 85 hard next summer, and i had a lot of close callls this past summer so i definitely want at least an in cab cage.  i have been looking at marlins, and all pros, and EOR off pirates.  my question is, as they are can they take major rolls?  or are they made to just take flops?  also do people usually get them and add more braces like around the windshield and behind the seats?  just trying to get an idea about the cages.  thanks for any info  :beerchug:


anything on cages?

Matty

well i didnt think much would happen with the truck for a while, but ive been steadily getting parts so that when i get home and i can just started working on it.  I just bought a 1990 housing from a friend back home with, the all pro chromoly axle shafts, all new bearings, detriot soft locker (which i think is a full carrier replacement  :yupyup: ), 5.29s, and it came out of a V6 so i got the beefy 3rd.  so im very very excited to get that in, get 5.29s for the front and put my aussie up there.   :wave: birfs  :smack:

Yota87Truck

Welcome to CO, Sweet rig!!!  keep up the good work and keep us posted with new pics!!


6.72:1

[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

Matty

hell yea me too. :cool: 

i also picked up my new rear axle today, from a 1990 V6 4Runner,  it has a detroit, 5.29s, all pro chromoly axle shafts.  major  :bling: :bling:

doesnt look like much now just gotta clean it up.  also scored a set of 33s with black wheels for FREEE so im gonna daily drive them and wheel my 36s




6.72:1

The accumulation of parts...such a grand feeling!
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

Matty

well i dont have a camera again.  so back to a couple cellphone pics.  nothing cool just a little update played on the rocks in my woods.  slid into a tree, truck isnt running to well think it may be a choke or accelerator pump issue.

but it was oh so fun to play with it again.    :beerchug:



4.3s10

the truck looks badass.... i will make sure to bring my camera to get some real pictures with the 36s  :beerchug: :beerchug:
1990 s10
4.3 bored out .030
Dynomax cat back
tbi spacer
Flowmaster delta 50
Holley 670
Accel coil
2 add-a-leafs

Matty

well a minor update and a couple poser shots.  4.3s10 has taken my new diff from the axle i just bought because when we pulled it there were some chips (very minor) on the coast side of the teeth so he is setting it up again (not sure who did originally supposedly a good shop)  so that doesnt happen anymore.  we pulled my other diff with my aussie locker the night before i left and he took that along with the new 5.29s and install i ordered.  he will be setting that up within the next couple weeks  :thumbs: 

then couple poser shots since it wasnt running right this week didnt really get to wheel it  :thumbdown:




Rainer

!!!FREEDOM IS NEVER FREE!!!!!!!!
1985 Toyota 4runner
22re rebuilt(offroad cam, internalls from enginebuilder)
5.29s with elockers f/r (high pinion front, v6 rear)
3inch suspensions 2 inch body
33 inch mixed tires. (bfg at, firestone at?)

86turboyota

My Build 1986 4runner SAS 36s etc
http://board.marlincrawler.com/index.php?topic=22625.0

"Later, I learned that even though I engage 4WD my hubs are not automatically locking? Something about manual locking hubs I think. What's manual mean? I need to read a manual to lock them? lol  So I found these neat autolocking hubs and installed them. Sometimes they dont stay locked while I am backing up, but that's fine because I dont have a backup camera to see where Im going (like our RV) so I just simply dont ever back up"- BigMike

Matty

4.3s10 has been working on setting up by diffs the past couple days.  he has been working on redoing the rear 5.29 and detriot,  and he just started on my front carrier with my aussie and 5.29s.  pretty sweet that he can set gears up now.


6.72:1

I know I love a good 5.29!
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

Matty

been wheelin it all week. lovin the 5.29s and lockers.  only got a couple shots from messin around in my backyard




Volcom

I can wait until you get that thing out here to CO!  How's Boulder?  I miss that place, everyday.
84 4Runner
Swapped EFI and a rebuilt 22RE
Marlin Dual Ultimate crawler
Marlin high steer
TG springs
5.29's, Aussie locked front and rear
39.5" Iroks on 15x10 2.5" backspaced wheels
109" wheelbase
Addicted Off Road 8 point cage
Addicted Off Road front bumper

Addicted Off Road

Colorado Marlin members, check out the Colorado section!!!

Matty

Quote from: Volcom on January 14, 2007, 08:25:23 AM
I can wait until you get that thing out here to CO!  How's Boulder?  I miss that place, everyday.

i cant wait either.  ive been lookin at trailers the past couple weeks so when i come home this summer i can buy one.  I was suppose to fly back to boulder today from break but theres ice storms and such here on the ice coast so it got cancelled.  probably get in monday or tuesday.  boulder is a great place though so much fun.  i hear its quite snowy right now im dying to get back to that.

Yota87Truck

I wish I had a backyard like that to play in. 

DTB

If i bring the beer can I come wheeling at your place? :beerchug:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Matty

Quote from: Dirt Toy Boy on January 14, 2007, 02:01:44 PM
If i bring the beer can I come wheeling at your place? :beerchug:


hell yea nothing like a backyard wheelin trip  :gap:

Gittinit

Quote from: Yota85Truck on January 14, 2007, 11:38:09 AM
I wish I had a backyard like that to play in. 
X2 that would be so great  I'd never leave home!
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

Birfailed

Go 1-Ton from the start

boggerunner

im lovin the back yard, mine has snow and a fence, u couldnt fit a honda in it its so small

Matty

got to run a local trail.  there was ice and freezing rain today.  but the truck performed flawlessly.  lovin the iroks.
:beerchug: