Author Topic: Snow White- 85xtracab Build (Read 98783 times)

decyfer · « **Reply #30 on:** Jul 24, 2005, 12:27:10 PM »

Quote from: red on Jul 22, 2005, 11:37:30 AM

bed liner is alot easier to clean than carpet. seals really good against water and all the offroad dirt u'll pick up. alot better than regular paint does

bed liner is impossible to clean. my whole stupid runner is covered in it. worst idea ever. just get the ruber mats.

unclejpl4x4 · « **Reply #31 on:** Jul 24, 2005, 01:31:57 PM »

$Beer Chug\'n$

Matty · « **Reply #32 on:** Jul 24, 2005, 02:59:56 PM »

Quote from: decyfer on Jul 24, 2005, 12:27:10 PM

bed liner is impossible to clean. my whole stupid runner is covered in it. worst idea ever. just get the ruber mats.

why, now i can just hose the dirt, mud and those huge rocks out of my cab

CTENG in KS · « **Reply #33 on:** Jul 24, 2005, 09:53:23 PM »

I have it all over the outside...I find that one of those big brshes they use at the quarter car washes cleans the liner real well.

decyfer · « **Reply #34 on:** Jul 24, 2005, 09:59:22 PM »

mines all over the outside. i just use a power washer and it doesn't get it clean.

Matty · « **Reply #35 on:** Jul 25, 2005, 02:09:08 PM »

Quote from: decyfer on Jul 24, 2005, 09:59:22 PM

mines all over the outside. i just use a power washer and it doesn't get it clean.

eh, guess ill have to deal with it....

on a happier note...i met a kid a while back and he had an IFS rearend sittin around at his house, and i went over this afternoon and he gave it to me....im really excited about it!! get it in a few days after i clean it up tear it down and do some tweakin....the drums a beasts compared to my old ones....some pics because i know ya'll like em....the old one first then the new one....

Matty · « **Reply #36 on:** Jul 26, 2005, 09:26:40 AM »

tearing down today...

Matty · « **Reply #37 on:** Jul 26, 2005, 09:27:21 AM »

one more

Matty · « **Reply #38 on:** Jul 26, 2005, 05:51:22 PM »

TUBE DOORS came....painted them black but no new pics yet...

Matty · « **Reply #39 on:** Jul 27, 2005, 09:28:59 AM »

rockin the marlin sticker.....hardcore...

unclejpl4x4 · « **Reply #40 on:** Jul 27, 2005, 03:44:33 PM »

Tube doors look sweet how long did it take U to get them set up

Matty · « **Reply #41 on:** Jul 27, 2005, 09:13:50 PM »

thanks...well painting was easy, and actually setting them up took a grand total of 5 min they are light enough so you can keep them steady and just bolt on yourself....i put a mirror on one so its legal...but insanely easy everything...

Matty · « **Reply #42 on:** Jul 28, 2005, 09:44:13 AM »

weldin some cool stuff up...

Makman · « **Reply #43 on:** Jul 28, 2005, 10:14:56 PM »

Dude, there are easier ways to get a tan. A welding hood will keep all that UV from whitening your teeth and burning your face.

Tube doors look awesome! Show us a picture of how you mounted a mirror on those pimpin' units.

Matty · « **Reply #44 on:** Jul 29, 2005, 01:01:41 PM »

come on...im just trying to get a little tan while im weldin...ill get the pics of the mirror as soon as i can

Matty · « **Reply #45 on:** Aug 02, 2005, 10:44:25 AM »

pictures of the mirror mounts, and the new reverse/rock lights

decyfer · « **Reply #46 on:** Aug 02, 2005, 10:48:42 AM »

those mirror mounts are hot. i likey

Hyena · « **Reply #47 on:** Aug 05, 2005, 10:29:44 PM »

Who cleans there carpet? I have vacumed mine out once and i have had it for 2 and a half years. Sat in the rain a couple times and doesn't evenb smell.

Nice extra cab BTW.

RHG · « **Reply #48 on:** Aug 06, 2005, 03:29:09 AM »

I spy 8 cylinders under the work bench! You gunna do a swap someday? Where did you get those mirrors?

crawlerdan · « **Reply #49 on:** Aug 06, 2005, 07:51:46 AM »

CTENG in KS · « **Reply #50 on:** Aug 08, 2005, 04:24:21 PM »

85, Bro, you need to get yourself a project thread started and get all this outa newbie, I can't be bothered to keep looking in here!

Matty · « **Reply #51 on:** Aug 13, 2005, 07:00:39 PM »

Quote from: rocks hurt good on Aug 06, 2005, 03:29:09 AM

I spy 8 cylinders under the work bench! You gunna do a swap someday? Where did you get those mirrors?

thats a 350 from my buddys camaro...its a race motor ...barely holds an idle....so no swap for that

but i might go 5mge, 7mge, or 3rz this winter im not entirely sure...after all the 3RZ swaps on here i think i might go that route...

the mirrors are the cheapest ones that they sell at my local autoparts store....

ohh and CTENG about the project thread i gotta move all this damn crap around for that?? cause thats the only reason i havent pure laziness

ohh and i just thought i would let everyone know being a poor kid i dont have much money and i just fell into a good bit.....lets just say here comes my 5.29s detroits and 36in Iroks!!!

Matty · « **Reply #52 on:** Aug 14, 2005, 07:53:49 AM »

i have a question for all of you....i am going to be running the 5.29s with a detroit in the rear, and i think i am going to leave the front diff open for the time being. I will be running 36in. Iroks, and i was just basically wondering with an open diff will i still get breakage in the front?? i figured i would hold off on puttin the detroit in the front to save some cash for now, and hold off on breakin lots of

. i was just wondering how that will be..

oh and being the noob that i am....i havent had any breakage on my little 33s....so i have no experience with the front yet, which should change cause im tearin down my axle cause its pretty old and slightly leaky right now..

Rocksurfer · « **Reply #53 on:** Aug 14, 2005, 08:04:48 AM »

Don't think you'll have any problems breaking as long as you are open, everyone I know that run big tires and have airlockers never break em.

decyfer · « **Reply #54 on:** Aug 14, 2005, 08:18:28 AM »

when you tear that front down you might as well through some longs in there and call it good. or just run a birf elimanator kit like i have.

gonzo · « **Reply #55 on:** Aug 14, 2005, 08:33:08 AM »

good pics

Matty · « **Reply #56 on:** Aug 17, 2005, 11:00:28 PM »

got a build up thread CT, no more Newb section for me....

man i feel all grown up...

RHG · « **Reply #57 on:** Aug 17, 2005, 11:50:01 PM »

hey decyfer....notice "poor kid" us youngins dont have the cash funds to just throw in some longs! Ive been saving money for months trying to get enough for SAS. Atleast 85 did the smart thing and bought one with a SA already there.

Matty · « **Reply #58 on:** Aug 18, 2005, 08:13:20 AM »

Quote from: rocks hurt good on Aug 17, 2005, 11:50:01 PM

hey decyfer....notice "poor kid" us youngins dont have the cash funds to just throw in some longs! Ive been saving money for months trying to get enough for SAS. Atleast 85 did the smart thing and bought one with a SA already there.

thats pretty much the exact reason i bought a SA one, i sold my other SA 4Runner though so now i have a bit more cash to play with.

decyfer · « **Reply #59 on:** Aug 18, 2005, 08:36:11 AM »

Quote from: rocks hurt good on Aug 17, 2005, 11:50:01 PM

hey decyfer....notice "poor kid" us youngins dont have the cash funds to just throw in some longs! Ive been saving money for months trying to get enough for SAS. Atleast 85 did the smart thing and bought one with a SA already there.

well, obviously. by the way. i'm 22. i don't think that makes me old. i know what its like to have no extra money. why do you think i bought a 85

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Matty [OP]

Related Topics