Author Topic: Need clutch help (Read 909 times)

SOV74 · « **on:** Nov 20, 2010, 05:06:20 PM »

I have a 20r with a w56 trans and the clutch is wasted. So the question is what year of a truck do I tell the parts guy for the clutch I need? May sound like a dumb question but I'm still learning. Any input would be great. Thanks

santa cruz crawler · « **Reply #1 on:** Nov 20, 2010, 05:13:44 PM »

Same as 22r

79coyotefrg · « **Reply #2 on:** Nov 20, 2010, 08:19:05 PM »

the clutch itself is the same with 20R or 22R but if you need a throwout bearing you need to tell them the what the w56 came from. most likely a 85 truck or runner with efi

santa cruz crawler · « **Reply #3 on:** Nov 21, 2010, 12:46:52 PM »

Oops forgot about that !!

Cheesemaker · « **Reply #4 on:** Nov 22, 2010, 06:36:18 AM »

First of all don't go to the parts house for a clutch. GO here!!
http://www.marlincrawler.com/clutch/heavy-duty/heavy-duty-clutch-kit-1200-lb
The best clutch out there.

And make sure that you get the flywheel machined with a 0.026" step in the face. Glen and I have them, and the best clutch out there.

Author Topic: Need clutch help (Read 909 times)

SOV74

Need clutch help

santa cruz crawler

Re: Need clutch help

79coyotefrg

Re: Need clutch help

santa cruz crawler

Re: Need clutch help

Cheesemaker

Re: Need clutch help

Related Topics


	Author Topic: Need clutch help (Read 909 times) 0 Members and 1 Guest are viewing this topic. SOV74 Rock Crawl'n Turtle Points: 0 Posts: 19 Member since Dec '08 Need clutch help « on: Nov 20, 2010, 05:06:20 PM » I have a 20r with a w56 trans and the clutch is wasted. So the question is what year of a truck do I tell the parts guy for the clutch I need? May sound like a dumb question but I'm still learning. Any input would be great. Thanks Logged santa cruz crawler Crawler Guru Turtle Points: -7 Posts: 682 Member since Aug '10 Get Some Re: Need clutch help « Reply #1 on: Nov 20, 2010, 05:13:44 PM » Same as 22r Logged 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Need clutch help « Reply #2 on: Nov 20, 2010, 08:19:05 PM » the clutch itself is the same with 20R or 22R but if you need a throwout bearing you need to tell them the what the w56 came from. most likely a 85 truck or runner with efi Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way santa cruz crawler Crawler Guru Turtle Points: -7 Posts: 682 Member since Aug '10 Get Some Re: Need clutch help « Reply #3 on: Nov 21, 2010, 12:46:52 PM » Oops forgot about that !! Logged Cheesemaker Rock Ninja Gold Turtle Award Turtle Points: 1363 Posts: 4,525 Member since Sep '04 Dean Tyler, you were an inspiration to all!! Re: Need clutch help « Reply #4 on: Nov 22, 2010, 06:36:18 AM » First of all don't go to the parts house for a clutch. GO here!! http://www.marlincrawler.com/clutch/heavy-duty/heavy-duty-clutch-kit-1200-lb The best clutch out there. And make sure that you get the flywheel machined with a 0.026" step in the face. Glen and I have them, and the best clutch out there. Logged Miss ya Dean (4THEWKN) & Kyle (KYOTA)!! 4THEWKN~9/17/2006 If it wasn't for you, I'd be driving something other than a Toyota! My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0 Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen