Got some work done on my rear fenders last night. Thursday Tim and I completely cut out the rear fenders flush with the floor. Last night I pulled my rear wheels off and did some work on the frame. I welded up a couple of the factory holes and cut off the ugly stock bump stop brackets. I cleaned up the frame and got it ready for some paint. Then I moved onto the rear fenders. I rolled a piece of 1/2" square tubing at work to use for the inside edge of the framing. I got those all fit up then I cut some pieces of 1/4" rod and tacked them in for support. I got some cardboard cut out as a template for the sheetmetal. I'm hoping to get bothe fenders completely covered with sheetmetal today.