Got quite a bit accomplished yesterday.   I removed the body lift completely and bolted the body back down.  I had to cut alot out of the floor to make room for the drivetrain.  As it sits now the bellhousing is about a 1/4" away from hitting the tranny tunnel/firewall area, and i cant quite close my hood all the way.  I did not push the drivetrain up any higher than where i had it before, I will have to do alot more extensive modifications to try and get a flat belly so i'm gonna leave it how it is now.  I am going to build my own motor mounts using some poly bushings so they are alot stronger than stock. When i build those i am going to lower the engine an inch from where it is now so that it wil clear the hood and give a comfortable space between the bellhousing and tranny tunnel.  All in all setting the body down two inches really wasnt too bad, It looks WAY better and doesnt feel nearly as tall!   NITE KRAWLERS and I also started the bed bob last night. We got it all marked and cut, only took us about an hour.  I am going back out there in a few minutes to start sanding off the paint around the area where the bed will be welded back on.  Enjoy some pics! the second and third pics are before and after removing the BL