I started removing everything from the interior tonight so i can get the body lift removed this weekend. The previous owner told me it's not possible to remove it because of the engine swap and a few other things, but i'm going to do it anyways! Getting the overall height of the rig down another two inches will be great. I want this rig to sit as low as possible while maintaining a good amount of ground clearance. I have looked over things and so far this is what i know i will have to do...... cut off rock sliders, cut a pretty large hole in the floor and redo the sheetmetal to clear the drivetrain, cut off the rear shock hoop that was installed, reposition radiator and i'm sure there is a few other little things to do. I am hoping to get most of it done this weekend.
After i get the BL removed the next big plans are to bob and possibly dove the rear, move gas tank to rear (I am going to cut a hole in the rear floor area and mount the tank in the best location possible, then re-sheetmetal around it so the tank is still outside of the vehicle) Then its onto the partial exo to rear interior cage.
here's a few cell pics of what i got taken apart tonight