Finished the doubler install last friday, just in time for the four wheeler photo shoot on saturday. The truck worked awesome, and the only failure all weekend was two blown beads. Went every where and then some, all those rockwel rigs on 46's couldn't keep up.
Only problem is the pinion angle on the front diff causes the yoke to stack under heavy acceleration. Got some shims and installed them today. The u bolts were too short so I dug around and came up with u bolts and spring plates, so I flipped the u bolts in the front while I was at it.
Found I kinked the passenger upper rear leaf, and also found a loose wheel bearing in the front. I have access to the shop for another day or two, so I may go ahead and put in the 63's while I have a chance. Pics to come soon....