Yesterday we got some more work done. We got the rest of the engine buttoned up and temporarily installed the flywheel, bellhousing and starter. Then to see if it would fire up we cranked on it for awhile to see if fuel would come out of the injector pipes that we had cracked open. Then I realized that the bolt on the back of the distributive head hadn't been tightened, so I tightened it up and we cranked on it a bit longer but still no fuel coming out of the injector pipes. I had to leave and the battery needed to re-charge so that is where we left it. I am going to take my mity-vac over next time and try to prime the fuel line.