Topic: MCR14 is 7 months away: What projects do you need to finish by then?

[Wermz84]

Low Lift!   I know i say that every year, but this time it's for real.   

New bead lockers, and tires to match.

Install Recaro trophys.  The broken stock seats are killing my back.

[fordh8r]

How far along are you with your project upgrades, Wermy? 

[*** YELLER ***]

rig is ready just need some add ons 

I want this and need to get parts so I can air up and air down each tire all at once



just added this so I dont get lost 


And I NEED this so I can breathe all night


for the most part we are done and read pending any breakdowns between here and there 

[Wermz84]

How far along are you with your project upgrades, Wermy? 

Not far enough. 

I took this Thursday, Friday, and Monday off to get to it. 

[fordh8r]

You have enough time to finish it...I hope. 

[Rockcrawlintoy]

I am going to try and get my rig ready but I wont be bummed out if I dont get it done. I will be there anyway.
So far I need to install lift, gears, lockers, 4:1 t case, shocks, sliders, armor, cage, Pretty much everything.

[Caboose]

Needs:
Weld on my Sliders/Front Bumper and get a rear bumper/rear quarter panel protection
Wire up front elocker/finish wiring rear
Space out crossmember so tcase isn't contacting cab
Rebuild Transmission (Rattle in 4th gear)

Wants:
Finish Blower Motor Wiring
Finish Dash
Install/Wire Anti Theft Device
Install Roll Bar

_________Anything Below this Line will most likely not get done before MCR____________
Design/Build/Wire center console
Bolt on Roof Rack
Buy/Install Off Road Lights (Now broke, probably not going to happen)
Install Winch/In Cab Winch Controls (Now broke, probably not going to happen)
Get AC Working
Install/Wire Stereo
Install/Wire B Pillar Speakers (Now broke, probably not going to happen)
Install/Wire Roll Bar Speakers/Amp (Now broke, probably not going to happen)
OBA (Now broke, probably not going to happen)

[zippo]

At least your truck runs

[Willard]

My things to do
-install front ARB (DONE).....Just got my mini compressor in the mail today actually.....waiting on axles.

-replace rear springs from 5" to 6"(UN-DECIDED)
-I too need to hook up my onboard air(DONE).....Installed Vi-Air constant duty kit. Works great and very clean kit.


-get new rear drive shaft from Tom woods BAMF cv (IN the works)
-Also waiting on my chromo shafts for the front. Baseline 4x4 had a great deal on my 44 shafts.
-Got these for the front.....
http://www.ebay.com/itm/221595647418?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT#ht_422wt_1124......no one else makes outer seals for my old 44. Or atleast that i could find.
Also re-routed my exhaust to clear my air tank and quited it up alot.....doesnt sound like a drag car anymore

-Built some adjustable bump stop brackets from some hitch tubing and welded to u-bolt plate.....worked out great.

-Installed MC short throw.......wow the difference. My trans was already fresh, but i love the new feel.
\
-Welded some new tabs on my hoops to get some more shock shaft exposed for up travel. Gained 2.5" of shaft and these tabs were like 1$ each on amazon.....

[Rockcrawlintoy]

I love seeing dana 44s in rigs

[12vctd]

Just need to  keep everything together for the next four months

[havik]

I need to finish my back bumper, install my trans and dual tcases, get drive lines made and do all my suspension work (ruf and allpro 5" rears)

Sounds easier than it is.

[bad coco]

As a heads up, there will also be a work party on Cadillac Hill Sept 18-20th.

On Friday, they will be doing mostly the prep work, but on Saturday they will be pouring concrete.  Cadillac Hill will have next to no passage on Saturday the 19th due to shoring up and stabilizing the hill.  Thanks in advance for your understanding and cooperation.

This should not effect anyone coming in via Loon or WWS, but if you plan on dropping in on Saturday from Tahoma, you will not be able to get by. 

Sunday it should be clear for us to exit as normal.

[87toybox]

This is my good buddy Mick O on the list. 4 weeks ago his truck looked like this...


Today it looks like..

[87toybox]

Still need to finish cage, do interior, Duel cases, and front locker. We have been working our butts off but we just might make MCR in time. Wish us luck!!