Devil Dog Runner

[brockbuilt85]

Looks so much nicer with out all that extra stuff on there! and the extra bend drop.

[*** YELLER ***]

Looks so much nicer with out all that extra stuff on there! and the extra bend drop.

yes it does, now picture a Jerry can on each side . . . Just like my old Jeep

before

after

[*** YELLER ***]

 

love the new lower stop / latch protector 

[fordh8r]

love the new lower stop / latch protector 

BTW, I figured you would likely at some point have your 3rd generations along for the ride so that was a highly thought out piece for the improved safety of little one's noggins if they should happen to not see it in the dark or simply just being a munchkins. Sure it's still made of steel but it isn't that sharp edged plate that could certainly hurt as much or cause a real injury that may ruin your trip. As it is, we don't mind those little ones resembling you we just don't want them ending up entirely like you. 

[fordh8r]

Looks so much nicer with out all that extra stuff on there! and the extra bend drop.

Indeed! I pondered on this for some time and I finally came to the conclusion that it had to be changed. Hey, it's just steel, right?

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

got my name tag on the tow rig today and it looks GOOOD 

[*** YELLER ***]

just a tad bit more support and some LED's for the rear

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

looks awesome

[*** YELLER ***]

UPDATED NEW LIST . . . .

1. finish sound system
2. mount roof rack
3. mount 31 '' LED on Roof Rack
4. mount Hi Lift to Roof rack
5. mount shovel to Roof rack
6. finish spare tire carrier
7. mount 2 Jerry can holders on spare tire rack
8. mount rear oval LED's to spare carrier to go on in reverse
9. replace driver seat
10. mount 3" lap belt
11. mount rock lights
12. install CB antenna and tune
13. mount mirrors to doors
14. finish wiring to winch and LED's
15. connect front cage to rear roll bar
16. repaint (same color pattern) the Devil Dog Runner (next year)
17. install new Clutch
18. lay down rubber flooring
19. paint new steal
20. install remote CB speaker
21. re install ammo can center council 
22. buy Jerry can tool box
23.  . . . . . . . . . 

[*** YELLER ***]

 

reverse LED's and camp lights (switched)

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[*** YELLER ***]

 

[fordh8r]

UPDATED NEW LIST . . . .

1. finish sound system
2. mount roof rack
3. mount 31 '' LED on Roof Rack
4. mount Hi Lift to Roof rack
5. mount shovel to Roof rack
6. finish spare tire carrier
7. mount 2 Jerry can holders on spare tire rack
8. mount rear oval LED's to spare carrier to go on in reverse
9. replace driver seat
10. mount 3" lap belt
11. mount rock lights
12. install CB antenna and tune
13. mount mirrors to doors
14. finish wiring to winch and LED's
15. connect front cage to rear roll bar
16. repaint (same color pattern) the Devil Dog Runner (next year)
17. install new Clutch
18. lay down rubber flooring
19. paint new steal
20. install remote CB speaker
21. re install ammo can center council 
22. buy Jerry can tool box
23.  . . . . . . . . . 

The next items to be done.

[*** YELLER ***]

 

I want this for my windows

[*** YELLER ***]

  antenna mounted

[*** YELLER ***]

Tommy this is what i remember for the remainder of your list 

1. mount roof rack
2. mount Hi Lift to Roof rack
3. mount shovel to Roof rack
4. replace driver seat
5. mount 3" lap belt
6. mount mirrors to doors
7. install new Clutch

and this is what I want to do on my list 

1. connect front cage to rear roll bar
2. repaint (same color pattern) the Devil Dog Runner (next year)
3. lay down rubber flooring
4. paint new steal
5.  . . . . . . . . .

[brockbuilt85]

Lookin good, getting close!