Devil Dog Runner

[fordh8r]

Hmmmm.....yeah, that would be it.  Good thing I didn't just dump the clutch after it tilted up. 

[*** YELLER ***]

Hmmmm.....yeah, that would be it.  Good thing I didn't just dump the clutch after it tilted up. 

sometimes even an idiot gets real lucky    just don't forget to take pictures   

I have that wiring harness and tags boxed up and going out tomorrow 

[fordh8r]

sometimes even an idiot gets real lucky    just don't forget to take pictures   

I have that wiring harness and tags boxed up and going out tomorrow 

Ok, cool.

[brockbuilt85]

you mean the incident where I used the 2" ball instead of the 2 5/8 " ball  and drove it 2 1/2 hrs to yer house and it almost fell off and destroyed my Yukon back door  yea the rest of the trip was great   

man Im an idiot close call fer sure

been there! thats why my tailgate has a nice long dent on it. but not because i used the wrong ball, but because i forgot to latch and went to drive off.............

[*** YELLER ***]

  

awesome Tommy thanks 

[fordh8r]

Much more to come.   

[*** YELLER ***]

[fordh8r]

Tomorrow I add the relays and get them working. I charged your battery too and I will also be doing something about that battery hold down. 

[*** YELLER ***]

I will also be doing something about that battery hold down. 

[fordh8r]

All I gotta to say is....     

[*** YELLER ***]

it worked and was free

[fordh8r]

Free doesn't always mean that it won't eventually cost you something.

[brockbuilt85]

whats wrong with the ratche strap tie down??

[fordh8r]

It couldn't be undone to get the battery out. It was stuck. I had to cut it to get the battery out to allow for all the cable routing and I cut open the hole more in the core support for all those wires to pass through so there was enough room to cover them and insulate the opening so the cables wouldn't rub through and short out possibly causing a fire. No bueno! Easier to just make one that fits like it should and be done with it. 

[*** YELLER ***]

In my defense I did NONE of the wiring on my Runner, it was there or someone else did it. I never wire, cause when I do it starts on fire every time

[fordh8r]

I wasn't pointing fingers so if you wanna throw anybody under the bus I'll let you do that. 

[*** YELLER ***]

in a heart beat

[*** YELLER ***]

gonna remove the old Radio and replace it with a CB and EQ for the tunes

[*** YELLER ***]

gonna mount teh 12 Volt Guy Remote Winch Switch here

[*** YELLER ***]

gonna mount the LED switches here

[*** YELLER ***]

Tommy found this in there somewhere 

[fordh8r]

Tommy found this in there somewhere 

It was hard wired and mounted in the ammo can console you have.

[*** YELLER ***]

It was hard wired and mounted in the ammo can console you have.

I thought I took it out guess it's been a while since I have been in the Ol' Runner

[fordh8r]

Ya think?! 

[brockbuilt85]

no more cruise control?

[*** YELLER ***]

wiring looking clean

[*** YELLER ***]

LED switch pannel

[*** YELLER ***]

LED switch layout

[*** YELLER ***]

LED switches done

[*** YELLER ***]

dash out