Topic: straight axle swap help?

[flat green yoda]

i am putting a sas on mu 87 ifs and want to put hydro steering and i read somewhere i could use my stock box with some ports drilled into it and that would run the cylinder.. never did this b4 so any help would be great

[Peterbuilt84]

This should get you started

http://board.marlincrawler.com/index.php?topic=4699.0

http://board.marlincrawler.com/index.php?topic=10579.0

[yoshaleng]

on top of your box, there's a vein that runs up and down. you need to tap there so fluid can travel for your return line ( do not tap too deep, ounce you can see the vein...stop). my pressure line, I tapped on the side so I can move my box as far up as possible. I don't have a picture of top tap but I have bad one for the side (the picture wa meant for the tire). LOL

[4RunnerChevy]

Read this whole thread, searched and found it in 20 seconds.

http://board.marlincrawler.com/index.php?topic=4699.0