MCR 10 Checklist:

[*** YELLER ***]

X2   

??

***YELLER***    >>>>>---------<<<<<    **Blingn**

>>>>> **Bilngn** -------  ***YELLER*** >>>>> * Big Mike * >>>> 

[brockbuilt85]

WTH?
did you call hime or what?

[*** YELLER ***]

We are still going but no Runner  but its Ok cause Matt is going to be my driver I really wanted to drive the runner but I cant afford the ins. right now sooo.... shot gun it is 

[Shamb]

Dude I added my 4runner to my insurance the other day, just PL and PD... it was an additional $21.60 to my existing policy w/ Geico.

Have you checked around? 

[*** YELLER ***]

Dude I added my 4runner to my insurance the other day, just PL and PD... it was an additional $21.60 to my existing policy w/ Geico.

Have you checked around? 

we have AAA and the wife wants it to be full coverage since its also gonna be a daily driven

[*FFC*]

we have AAA and the wife wants it to be full coverage since its also gonna be a daily driven

Then don't DD it. Ins it as a rec vehicle on the cheap! Even full coverage is cheap on rec vehicles... 

[brockbuilt85]

Fix Front Drive line- currently working in it
Pay Registration For Round Up
Gas
"Borrow" tow rig and trailer from my brother
Food
Dont Break Anything Major This Summer

Things Id Like To Add:
OBA
Air Locker In Front
Winch

[Slolyfe]

Just gotta survive the next 3 trips and buy food and beer.
I may clearance the front axle.

[Gixxer Jon]

Swap rear spool with arb
Build rear bumper
Install cd player and 6x9's
Replace knuckle studs with arp magnum studs
Weld in muffler
Install new Yukon 5.29 R&P since I found broken teeth in rear gear
Re fab buggy leaf supports
Install cb
tube doors

[bigarms23]

finished the paint
installed chromoly shafts
pick up a spare ring and pinion
still need cage and to finish my spare drive shaft

[superyota]

install arp knuckle studs
cut out front and rear fenders
install half doors

[rockin86runner]

install MC so i got breaks
change rear diff fluid
finish welding up new front dline
load up some gear
and hit the trail

[Monster Yota]

Install Rock lights...
Fix and install Tube doors...
Find Temporary Rims...Then mount+balance tires,,, Im sure my beadlocks wont be here on time 
Install TC style powersteering pump, and build brackets for my powersteering cooler, build reservoir brackets...
Install 120A high output alternator...
Finish interior roll cage,,, (don't think ill have time)
Change diff fluids F+R...
Torque every nut and bolt on the truck!!! Esp steering arms!
Load up!
Gas, Food, BEER!!!
Go wheelin!

[SloCrawler]

1. Install HD Clutch
2. Torque everything down
3. Secure battery and passanger seat
4. Mount spare
5. Cover flatbed
6. CB and CD player install

[Slolyfe]

Still just gotta but food. But had two great trips.

Who is going to the Stampede?

[ROCKO]

Still just gotta but food. But had two great trips.

Who is going to the Stampede?

see ya there....are you getting a room as well or camping?

i will call you in the next couple of days

[Slolyfe]

Well. I jinxed myself. It all started today with a quick U-bolt change in the front. As I started to torque them my U-blot flip plate(on top of the leaves) bent more that normal. So I decided to make a new one out of 3/8 plate so it was low-profile and cleared my hydro-assist. As I turned the wheel back and forth to make sure it cleared, I noticed my steering box moving a lot, and then I realized my frame broken 3/4 around. So here she is.







I got all the cracks and more rewelded, just need to plate it all and box it in. I had to take out the steering box and radiator to do it. What a pain and to top it off I only have one day to finish it be for we leave.

[8T3]

Better now than on the trail. Good catch. Those look all cleaned up and ready to weld. EZ.

[Slolyfe]

Better now than on the trail. Good catch. Those look all cleaned up and ready to weld. EZ.

Seriously. I try to take a real good look at the rig before runs. Take out as many elements of surprise. I got it all welded up and got all the templates made for the plates. just need to cut them out and weld them over the original stuff.

some progress

[TURBO]

a week left, so here goes...
http://board.marlincrawler.com/index.php?topic=53697.0
and
http://board.marlincrawler.com/index.php?topic=84384.0

[Wermz84]

Seriously. I try to take a real good look at the rig before runs. Take out as many elements of surprise. I got it all welded up and got all the templates made for the plates. just need to cut them out and weld them over the original stuff.

some progress

Good catch before the trip.  nice work.

[fordh8r]

Good catch before the trip.  nice work.

[Slolyfe]

Seriously, She is on the trailer and ready to go. I hope.

http://board.marlincrawler.com/index.php?topic=84439.msg968993#msg968993