MCR 10 Checklist:

Started by Blingn, March 22, 2011, 02:08:01 PM

0 Members and 1 Guest are viewing this topic.

Blingn

Well we have somewhere around 24 to 25 weeks left to go  :drooling: what is left to do on your rig before you hit the trail for MCR 10?

Blingn

make leaf spring pack-ruf didn't work out
fill t case and transmission
washers on the t case mount
install speakers
finish gauges
install new seats
make the winch work off toggle in dash
mount 38's on the rims
fix broke tie rod
finish rock lights
last coat of paint (monster blue and black)
fix fuel cell cap
fix front square d line
=================================
add support to cage and rear passanger area
rear seat mock up
finish floor in rear
mount spare 38
mount high lift
build and mount shocks

superyota

bob bed 10 inches
check and torque all wheel spacers
exo cage(not sure if this will happen before then)
swap out long spline for square front shaft

ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

Rocksnail

Build my new rig! ha. Sure hope i can make it this year. been trying to go for 4 years now. I'm just going to have to tell the boss ( me) that im off for the weekend.
1993 4door  s10 Tahoe. 4.3 th350c duel toys w/4.7 rear, D60 front 5.13 welded. 14Bolt rear 5.13 mini spool,hydro assist, TG 5HD front springs, 63s out back. h2s with 39x14 17 Pit Bull Madd Dogs

*** YELLER ***

 :willynilly: :boozer: :popcorn: :meal: :pimp:

anything else I can do let me know Im sure I could make a weekend werk  :king:






:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

bigarms23

go from 5inch springs down to 3inch
redo drive lines if i have to
build new bumpers
build internal cage
find spare tire
finish painting runner
remember spare axle shafts this time
finish my brothers 80 yota so that he can bring it
bride my spotter to come
buy new tent
i think thats it
88 4runner 2016 5.3 auto atlas 2 on tons and tons of fun

John Doe

#6
A lot of work but I should be good. As of now I do have a open passenger seat, but that is subject to change.
Build and install new axles
new rear bumper
clearance rear fenders
new rear shocks and mounts
new tires and rims
My 85 4Runner build http://board.marlincrawler.com/index.php?topic=46841.0

peacesells: "Its kinda fun tryin to avoid body damage, just like playing operation with different sound effects"

ROCKO

beer
gas
beer
trailer
beer
fix brakes
beer

disclaimer: that list is only good if i do not break my truck before that  :gap:
JUST ANOTHER ROCK CRAWLER....
with a lot of good stuff

F@$K CANCER

brockbuilt85

Fix Front Drive line- currently working in it
Pay Registration For Round Up
Gas
"Borrow" tow rig and trailer from my brother
Food
Dont Break Anything Major This Summer

Things Id Like To Add:
OBA
Air Locker In Front
Winch
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Wermz84

Lift it.  Only because I say that every year. :gap:
I like to Drive!

brockbuilt85

Quote from: Wermz84 on April 07, 2011, 02:41:59 PM
Lift it.  Only because I say that every year. :gap:
if it aint broke.....
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

91 ex-cab

Button up the 3-link
gear and lock the axles
get coilovers
make new rear drive shaft
install rear shocks
brake lines
hydro assist
register

Hopefully all of this comes together before september :haha:

IMMUDDY

#12
UPDATE on List:

Marlin Cases: Ordered
SpyderLocks: Ordered Got the wheels powder coated black, and the rings painted to match the new paint going on the Runner
MTR'sswitched to 37" IROK's: Ordered mounted up waiting for Runner to get finished @ paint shop.
Paint 4Runner: @ shop
Marlin/Addicted OffRoad Front Bumper. One of the 2. Hopefully a Marlin.
Winch: Picked up a Smittybilt XRC8 with Synthetic rope.

Oh yeah, Win the Lotto.
If I hit it just right, I might make it.

fordh8r

This is gonna be the shortest list for MCR ever...  :gap:

1)  Swap in my OBA compressor

2)  (No 2 yet....I'll think of somethin)  :disturbed:

brockbuilt85

Fix Front Drive line- currently working in it
Pay Registration For Round Up
Gas
"Borrow" tow rig and trailer from my brother
Food
Dont Break Anything Major This Summer

Things Id Like To Add:
OBA
Air Locker In Front
Winch
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

*** YELLER ***

Quote from: brockbuilt85 on June 15, 2011, 08:13:03 AM
Fix Front Drive line- currently working in it
Pay Registration For Round Up
Gas
"Borrow" tow rig and trailer from my brother
Food
Dont Break Anything Major This Summer

Things Id Like To Add:
OBA
Air Locker In Front
Winch

I will try to get that comp. outa my runner so you can see it and decide from there :thumbs:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

brockbuilt85

.
Quote from: ***YELLER*** on June 15, 2011, 08:24:55 AM
I will try to get that comp. outa my runner so you can see it and decide from there :thumbs:
yea, i hope i can find some specs for it. would be cheaper than getting a new one....
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

fordh8r

What kinda compressor is it?

brockbuilt85

i dunno, hopefully the one i want :gap:
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Shamb

1. Everything





........  that's pretty much it, I should be able to get 'er going within the next few weeks right!

R.I.P to my Papa, I miss you pops......

Knowledge is power  www.pirate4x4.com/forum

New Buildup in process 85' 4runner "Bad Decisions"
http://board.marlincrawler.com/index.php?topic=52566.0

Check out my 1-ton build up thread
http://board.marlincrawler.com/index.php?topic=22600.0

46&2

I need new 35x12.50x15 tires. And a tune up. And money. Then I am ready.  :biggthumpup:
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

Tito86

Weld the rear end
Bob the bed 12 inches or so
install dual Transfer cases
new Drivelines      
F150  springs   
Flat belly skidplate
new alternator
and secure my battery.

hopefully have enough time to do it all  :shocking:

brockbuilt85

Fix Front Drive line- currently working in it
Pay Registration For Round Up
Gas
"Borrow" tow rig and trailer from my brother
Food
Dont Break Anything Major This Summer

Things Id Like To Add:
OBA
Air Locker In Front
Winch

:eyebrow:
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

*** YELLER ***

Quote from: brockbuilt85 on July 12, 2011, 09:34:05 PM
Things Id Like To Add:
OBA

what happened to the one I gave you if ya dont want it I'll take it back I can use it
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

brockbuilt85

im still planning on using it, but if you want it back i guess you can have it.  i just got finished cleaning it up to make it purty. i put it on the list because its not mounted and such, but i guess technically i have OBA
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

*** YELLER ***

if yer gonna use then by all means go for it, just thought you wernt :yupyup:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

BigMike

Here is my checklist =====> :crossed:
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

brockbuilt85

Quote from: ***YELLER*** on July 13, 2011, 09:02:53 AM
if yer gonna use then by all means go for it, just thought you wernt :yupyup:
well, it might not get mounted b4 thenbut who knows ive know ive done things that i dindt think i was gonna, ive seen me do it!
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

*** YELLER ***

MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON