Bakersfield, CA

Started by jrock, March 03, 2010, 04:59:05 PM

0 Members and 1 Guest are viewing this topic.

emsvitil

Valve cover could have been changed......


My 22RE is EFI.
Ed
SoCal
86 SR5 XtraCab
22RE  W56B
31x10.50R15

superyota

#181
look at the whole going through the firewall on the passenger side where the harness goes through.  if it looks factory with a factory looking gramet in it, it probably came stock efi.  if it looks like its been chopped out with a homemade looking gramet(like mine), then its probably been swapped over.  the whole is just below the hood hinge and the left bottom of the passenger side wiper motor.  
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

Gixxer Jon

the city lights and moon looks really cool in the pics jrock..  :thumbs:
Hillcrest Crawlers
_________________________________
||_________||_________||__TOYOTA_||
||_________||_________||__________||

http://board.marlincrawler.com/index.php?topic=67011.0

ae racer

yeh the gromit looks factory.. he must have swapped the cover. :crossed:

jrock

If it has an EFI intake and it runs, your good :)

Gixxer Jon

Hillcrest Crawlers
_________________________________
||_________||_________||__TOYOTA_||
||_________||_________||__________||

http://board.marlincrawler.com/index.php?topic=67011.0

superyota

the broken tail light was bright ok. lol
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

ae racer

hey jrock and Jon S, i saw that you guys were needing some parts from that 4runner too... i was wondering if we could have the guy ship the parts together to try to save us on shipping charges...i wouldnt mind having my stuff shipped to (or picked up....Jon's post) either of you guys or even to superyota since he has that shop.

jrock


ae racer

hey are any of you guys up for a trip to pick a part on this sat. the 3rd... it is half price... im planning on going but have never been to a junck yard and have never really messed with full scale cars so i wouldnt know what im looking for looks like.

Gamera

Quote from: jrock on June 27, 2010, 07:55:39 PM
Mike, my truck looks so YUCK! :)
The run was fun.

so can you Write a trail report on this run =]

ae racer

#191
would you guys be interested in chipping in to purchase this 87 4runner as a club doner/parts car if he doesnt sell it thurs?  hes suppost to be sending me more pics and if he doesnt sell it, he said that he might cave on the price a little.
http://pirate4x4.com/forum/showthread.php?t=898428
http://losangeles.craigslist.org/sfv/cto/1814540727.html

i'd need the following for my '88 build
-two center consol switches and wiring (not the window lock)
-bulb for the rear (inside the "bed")
-whole cab light assembly if it works (right above the drivers head)
-hinge for the center consol
-plates that say 4runner right behind the doors
-starter relay
-ignition switch
-I may also need the sensor for the gas gage (or whatever will fix the following prob) b/c after mine drops below
 3/4 tank, it goes straight to E
-passenger tail light (mine is faded)
-and maybe the dash b/c mine is cracked

jrock

Quote from: mikenewmanhayes on June 29, 2010, 04:34:59 PM
so can you Write a trail report on this run =]
Maaaaaybbbbeeeeee :)

Gixxer Jon

How did she drive home?
Hillcrest Crawlers
_________________________________
||_________||_________||__TOYOTA_||
||_________||_________||__________||

http://board.marlincrawler.com/index.php?topic=67011.0

jrock

Much better. I don't get as bad a shake just driving but at higher speeds it shakes. I still need a new drive shaft. Mine is bent and I don't think it likes spinning so fast.

ae racer

hey guys, i got those pics of the 4runner they were taken when he "first got the truck. Since then ive done a little cleaning on it"  I'll let you know if he sells it tomorrow and the lowest he'd go if you guys want to try to get it for parts.  someone send me their email so that i can get the pics to you

AaronB

Casey, are actually going to turn this in to a crawler or a DD? if your going to actually "use" it i wouldnt worry about small things like tail lights. do you have a front axle yet, or gearing, lockers etc......
"Never make your passion your occupation. it will loose it's luster and become work. that's why i never wanted to become a gynecologist!"

Quote from: skipnrocks on November 08, 2011, 05:36:37 PM
I also taught him how to put in 5min of hard work and then spend 15min staring and admiring what you have done...

ae racer

#197
no, i havnt gotten any of that yet and it will be a DD for a while... Im planning on keeping it as nice as possible for as long as possible.. kinda like that red '85 project 4 skinner...http://board.marlincrawler.com/index.php?topic=53806.0

ae racer

so where are a few good local places to go wheeling? i saw on the previous page freeway ridge (where is that?) any other spots..also easy trails?

superyota

Quote from: ae racer on June 30, 2010, 11:49:57 PM
so where are a few good local places to go wheeling? i saw on the previous page freeway ridge (where is that?) any other spots..also easy trails?

freeway ridge is up 178, almost to lake isabella.  there is also rock front ranch, mananche meadows, and hungry valley. and if you want to get into the desert, there is a bunch more like last chance canyon, snake bait, and a few others.  none of them are hard trails.  any stock 4x4 can make it up the trails.  fullsize trucks can't make it on some, but any smaller truck/suv is good to go.  the trails are just enough to make it fun.  with exception to snke bait, about 75% is pretty much a fire road, but the other 25% has some fun rock sections.  for being so close to bakersfield, i can't complain.
ABD Motorsports
#4475

If you can't convince them, confuse them.
Placer County Crawlers - President 2011-2016
www.placercountycrawlers.com

Rubicon Trail Foundation - Property Committee member
Friends of Fordyce - Board Member
KK6QDW

ae racer

sweet, thanks for the info.

ae racer

so is anyone going to go to 2 pick a part tomorrow for half price parts? im going to try to get as many pieces for my 4runner as i can afford.

ae racer

hey jrock, there was one 4runner and one other 2nd gen truck i saw at the pick a part today... the runner has a good pass. front fender and front corner light.  The truck had good doors and fenders i think... best news is that they are both on the far right of the import side. (4runner 3rd row back, truck about half way back) i think that there was one more truck but i cant remember where exactly it was...i think on the left side of the imports towards the center of the entire yard. Both trucks (if i remember right) had tail light buckets and lights but no covers.

i ended up getting a set of gray sr5 seats, rear light covers, a few switches, rear toyota badge, and one rear interior pannel.

i might be going again tomorrow to help a friend out with a power steering box for is '70 dodge and maybe get the ignition coil or something from the 4runner...lmk if you want me to take pics of anything and text them to you..(6 6 1 - 3 3 1  6 9 0 6)

ae racer

#203
.......

ae racer

#204
...........

ae racer

#205
.........


Gamera

High Road Run

july 24th weekend Duzy trail

-----O-O-O
//___l__, \___\___
l_---\___l---[]IIIIII[]-
(o)_)--(o)_)--O-)_)

MCR#9 Sept. 11th weekend rubicon trail

4x4Haze

hey guys i stumbled on this post, anyway im new to bakersfield
A jumper cable walks into a bar. The bartender says, "I'll serve you, but dont start anything."

Gixxer Jon

Quote from: 4x4Haze on July 09, 2010, 11:31:25 AM
hey guys i stumbled on this post, anyway im new to bakersfield

:welcome: what do type of rig do you have
Hillcrest Crawlers
_________________________________
||_________||_________||__TOYOTA_||
||_________||_________||__________||

http://board.marlincrawler.com/index.php?topic=67011.0