Author Topic: Rolled Runner (aka Golden Tacoma) NEW TACOMA! (Read 60945 times)

GotMyYotaBack · « **Reply #120 on:** Feb 06, 2010, 07:27:47 AM »

I am not a hater, and your truck looks sweet, except that cage. Did you buy that new from All Pro? And was it specificly for your year Runner? If it were my $$$$ I would be pissed, you should not have to put up with that down pipe in the middle of the floor, nor should you have that cab bar next to your head. I have seen All Pro cages in 1st Gen Runners and they dont look like that, something went wrong here, or the ones I have seen are modified and I didnt know it. It may not bother you now, but a whole trail run of bumping your head (padded or not) and almost triping everytime you hop out is gonna drive you nuts.

All Pro offers pretty stand up products, but if this is the way they designed the cage to be, I wouldnt recomend it.

Judd, Piere's is an All Pro does his look like this?

Welcome to page five,

Jud · « **Reply #121 on:** Feb 06, 2010, 11:05:46 AM »

Quote from: GotMyYotaBack on Feb 06, 2010, 07:27:47 AM

I am not a hater, and your truck looks sweet, except that cage. Did you buy that new from All Pro? And was it specificly for your year Runner? If it were my $$$$ I would be pissed, you should not have to put up with that down pipe in the middle of the floor, nor should you have that cab bar next to your head. I have seen All Pro cages in 1st Gen Runners and they dont look like that, something went wrong here, or the ones I have seen are modified and I didnt know it. It may not bother you now, but a whole trail run of bumping your head (padded or not) and almost triping everytime you hop out is gonna drive you nuts. All Pro offers pretty stand up products, but if this is the way they designed the cage to be, I wouldnt recomend it.

Judd, Piere's is an All Pro does his look like this?

Welcome to page five,

Yes I'm pretty sure Pierres is All Pro, His fits in there nice and tight.

Jakesteads · « **Reply #122 on:** Feb 06, 2010, 05:10:02 PM »

it was for an extra cab and the cage doesn't bother me i bought it second hand for pretty cheap.... the bar in the floor really doesnt effect me getting in maybe if i was taller....

i wheeled today and i didnt hit my head at all or even come close and i was wheeling it ...

im happy with it for the price i spent on it im sure it will save the cab from going flat..

wakkjobb · « **Reply #123 on:** Feb 06, 2010, 05:19:58 PM »

You want to try for next weekend, maybe something more north towards you this time? I am going to check into exo prices ASAP... sliding sideways, backwards and off-camber down hill is a little

to say the least.

>>Dan

Jakesteads · « **Reply #124 on:** Feb 06, 2010, 05:24:30 PM »

the few pics i took

we attempted to eagle rock didnt get to far.

NITE KRAWLERS · « **Reply #125 on:** Feb 06, 2010, 06:34:59 PM »

Nice man, finally got to wheel it. Looks good, cage seems a little in the way but if it works for ya way cool dude. Let me know how ya like the dirty 30's man. We put a set in my uncles 4 runner and we went sno mobb n the other day and they held up great. He has 36" swampers tsl's on it. He broke a stock birfield last winter right away in the sno!!

Jakesteads · « **Reply #126 on:** Feb 06, 2010, 10:44:33 PM »

ya honestly i thought it looked bad too but ask wakkjob(dan) i was in and out of my truck a bunch today and it doesnt get in the way one bit.... it made me feel alot safer though that is for sure....

ya my 30's come tuesday im gonna weld my front diff then and install them it should be pretty beast after that...

axled89 · « **Reply #127 on:** Feb 07, 2010, 10:04:16 AM »

it's comin along good.

COToy91 · « **Reply #128 on:** Feb 07, 2010, 10:11:08 AM »

http://www.jegs.com/i/JEGS/555/70001/10002/-1

buy some of this so i dont here about you knocking yourself out or worse. pipe insulation is not padding

Jakesteads · « **Reply #129 on:** Feb 07, 2010, 10:25:25 AM »

Quote from: COToy91 on Feb 07, 2010, 10:11:08 AM

http://www.jegs.com/i/JEGS/555/70001/10002/-1

buy some of this so i dont here about you knocking yourself out or worse. pipe insulation is not padding

ya the pipe stuff was just for this weekend..... i all ready ordered that stuff from jegs good look though

COToy91 · « **Reply #130 on:** Feb 07, 2010, 10:31:55 AM »

Quote from: Jakesteads on Feb 07, 2010, 10:25:25 AM

ya the pipe stuff was just for this weekend..... i all ready ordered that stuff from jegs good look though

Just looking out for you

I have heard to many horror stories. I have not even got it on my cage yet, although i have not driven it since

Jakesteads · « **Reply #131 on:** Feb 07, 2010, 10:40:51 AM »

ya i didnt even want to offroad it without a cage since it was all ready tweaked from the roll

but since im lowering it down even more i think ill be pretty good in the upcoming days.

COToy91 · « **Reply #132 on:** Feb 07, 2010, 10:43:39 AM »

when are you and dan going wheeling next, ill have to see if i can make it

Jakesteads · « **Reply #133 on:** Feb 07, 2010, 10:49:14 AM »

i just posted in the colorado board i think next time is feb 20-21 we want to wheel something near denver this time i was thinking out near boulder... but i dont know any good spots

maybe rollins pass? ive herd of that im just looking at stuff on traildamge

COToy91 · « **Reply #134 on:** Feb 07, 2010, 02:02:24 PM »

i heard people on 42's are getting stuck up there

wakkjobb · « **Reply #135 on:** Feb 07, 2010, 03:25:15 PM »

... I'm out.

I still want to know who was running what up Eagle Rock, I saw some KM2 and Irok tracks, but what were they on? Buggies?

Jakesteads · « **Reply #136 on:** Feb 07, 2010, 03:34:05 PM »

Someone figure out a spot and lets go!!!!

wakkjobb · « **Reply #137 on:** Feb 07, 2010, 03:57:24 PM »

After you get a front locker, Mr. Spin...

Jakesteads · « **Reply #138 on:** Feb 07, 2010, 04:01:11 PM »

Tuesday ill have it welded does that count

wakkjobb · « **Reply #139 on:** Feb 07, 2010, 04:49:39 PM »

Better than nothing I suppose... here's some pics from yesterday:

>>Dan

Jakesteads · « **Reply #140 on:** Feb 07, 2010, 05:00:23 PM »

ya wasnt soo much wheeling more like rally racing lol

Phazertwo · « **Reply #141 on:** Feb 07, 2010, 06:26:10 PM »

Rollins pass is fun on a snowmobile this time of year, but not in a truck...

PZ

axled89 · « **Reply #142 on:** Feb 07, 2010, 07:31:26 PM »

how much lift does that runner have??

Jakesteads · « **Reply #143 on:** Feb 07, 2010, 07:38:04 PM »

5" springs about about 3/4 of a BL

axled89 · « **Reply #144 on:** Feb 07, 2010, 07:40:00 PM »

how top heavey does it feel. cause i have the 6" allpro. and it feels to tall. but they are pretty new and tight still.

Jakesteads · « **Reply #145 on:** Feb 07, 2010, 09:44:49 PM »

it feels kinda top heavy but its better since i took body lift off... i think my springs are pretty stiff too but after flexing them out this weekend they felt better...

im planning on replacing the front main leaf with a rear main to stretch it forward some and to correct the shackle.. the rear i think i need to do about the same thing just change out the main....

i might take a leaf out of each pack also and cut fenders out to lower it down some... then of course bump stop it

tuesday my shafts come in and im planning on getting my front diff welded, gotta call some shops tomorrow see how cheap they will do it for... also im picking up a HF parts washer for 50 bones tuesday so i can make my parts clean once again!!!!

axled89 · « **Reply #146 on:** Feb 08, 2010, 05:20:53 PM »

thanx bro.

Jakesteads · « **Reply #147 on:** Feb 09, 2010, 10:53:21 AM »

well i decided to keep my front bumper and cut up the grill i also got the fog lights on... pictures to come.

wakkjobb · « **Reply #148 on:** Feb 09, 2010, 10:57:09 AM »

...so no Addicted bumper, eh? Dang, guess I'll have to get the sliders myself then. Come on, gas money!!! What part of the grill did you cut? I thought that bumper was snug on it?

I may start on my front axle this week, I realized I can sell my rear 4.11/Detroit third when I get the rear 5.29/Detroit third along with the current 4.11/Lok-Rite front axle. More money towards a cage!

>>Dan

Jakesteads · « **Reply #149 on:** Feb 09, 2010, 08:26:33 PM »

$$$ sweet dude i might still roll up there one day or another to check it out and give him a shout.

pics of today

i cut the grill up to fit... i dont like how i cut it im gonna get another grill....and cut it a bit different, IE not cut the ends off.

also got my fog lights installed and wired

also since i live in an apartment i have a 1car garage(better than nothing) so in true space saving fashion .. PEG BOARD

still not done need some more hangers.

YOU CAN ALSO See my new to me parts washer i got for 50 bones with about 10gals of fluid in it!!!

and dirty 30's came

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Jakesteads [OP]

Related Topics