Topic: Swapped89 party bus picture update

[swapped89]

I may have missed it but why was der a hole there in the first place??  

had to cut the floor out to clear the horsecollar and I had to cut out the back of the cab to clear the frame rails.

There is 4 patches like the one in the pic above.

[swapped89 [OP]]

Here is the boxed in holes all sealed up. under rear driver side passenger seat.


Under passenger side rear seat.


Horsecollar. and the little patch to the left of the pic is because they guythat had the cab before me had duals on an auto/4.3 vortec or somethin.


Gonna head out into the shop now and shim my rear axle for a better pinion angle. then put the driveline in and start putting the interior together

[mattlosch]

hell ya its looking good dude!

[twistedtoy92]

Nice progress!

[swapped89 [OP]]

hell ya its looking good dude!

Nice progress!

Thanks guys. She's almost done.
I got the insulation for the floor put in. And laid down my old vinyl carpet. I wanna get some new vinyl flooring but the old stuff will do for now. also picked up my stretched rear DL and installed it too. Today Im just puttin some rectangle tube between the rear of the frame as a make shift bumper till Im ready to build a nice one. And i mounted my ARB compressor under the rear seat. Im real close to bein done.
new dl compared to a stock one.

Floor Insulation

Vinyl floor

Compressor

[P-DiseToy24]

Lookin good man keep it up your almost there

[Jud]

Is that DL chrome?

[swapped89 [OP]]

Lookin good man keep it up your almost there

thanks man! I can't wait. I'm takin it out next weekend for sure.

Is that DL chrome?

Yes


 naaaa B it's clear coated
 L ks

[gnarrkill]

Drive line tech?

[Jud]

Yes


 naaaa B it's clear coated
 L ks

It still looks pretty damn     lol

[swapped89 [OP]]

Drive line tech?

yes sir

[mattlosch]

this is looking so good buddy i wanna see it in person

[TheCookieMonster]

 looks nice  .. that compressor might get annoying after a while. depending on how loud it is  

[swapped89 [OP]]

looks nice  .. that compressor might get annoying after a while. depending on how loud it is 

I thought about that, but it takes no more then 5 sec. to pump up. And it dont bother me at all. I like the lil blow off sound it makes too. And if i do get annoyed its only four bolts and redirect the air line and wiring harness.

[NITE KRAWLERS]

Lookin good dude!!

[swapped89 [OP]]

Lookin good dude!!

thanks broseph. I put the doors on and started wiring my amps and speakers and electric door locks last night. Soooo close to bein done. I could drive it now but I gotta have my stereo .

[gnarrkill]

i just re read ur whole build hah lookin good tho man gonna have to hit the snow before i start tearing my apart!

[swapped89 [OP]]

i just re read ur whole build hah lookin good tho man gonna have to hit the snow before i start tearing my apart!

tearing your apart!? Have you even got your wheels and wheeled the damn thing yet? Uh hahah just get yer wheels and wheel with me for the rest of the winter

[gnarrkill]

tearing your apart!? Have you even got your wheels and wheeled the damn thing yet? Uh hahah just get yer wheels and wheel with me for the rest of the winter

i have wheeled it like 3 times now. never with my own tires rims are still 2 weeks out.. 1 time was 45 10 trail 2nd wasnt wheeling had to go pull a f 250 out of the snow haha and 2nd was a small little trip on some garbage toyo mts. but ya ill wheel it tilll it blows prolly i just need a motor mount and some no knock ahha

[swapped89 [OP]]

right on! My truck should be 100% by the end of tonight. I woulda bneen done last night but my alarm system was givin me

[91 ex-cab]

Still planning on making the bed sides and doing all of the tube work?

[THK Matt]

LOOKS SICK!

[swapped89 [OP]]

Still planning on making the bed sides and doing all of the tube work?

ya but not any time soon. I'm still tryn to find a straight bed. And I'll probly start the tube work in a few months. I just wanna wheel the damn thing after this two month binge of working on the truck

[swapped89 [OP]]

LOOKS SICK!

Thanks man I like it alot too

[toyotanner]

it would really suck to flop this thing before you cage it haha no jynx intended...
looks  like the bed needs a new coat of paint

[91 ex-cab]

it would really suck to flop this thing before you cage it haha no jynx intended...
looks  like the bed needs a new coat of paint

  you better get the cage work going cause it's doomed now haha.

[swapped89 [OP]]

it would really suck to flop this thing before you cage it haha no jynx intended...
looks  like the bed needs a new coat of paint

I'm not puttin any more work into the bed cause Im lookin for a new straight one as Ive mentioned a few times all ready   So what u gonna do with that cage? Im bout to spend that down payment you gave me

 you better get the cage work going cause it's doomed now haha.

[91 ex-cab]

[NITE KRAWLERS]

I bet your out wheel n this thing man!! You should do a practice dove on that box you have now and get it figured out so you don't happen to mess up the new box man. just a thought, plus the truck will look sick with the dove and all dude!! Post pics of wheel n soon brah!!

[91 ex-cab]

I bet your out wheel n this thing man!! You should do a practice dove on that box you have now and get it figured out so you don't happen to mess up the new box man. just a thought, plus the truck will look sick with the dove and all dude!! Post pics of wheel n soon brah!!

I don't think he should dove it. Box you mean bed