Author Topic: Russell_G's 87 longbed build up. The door panels and interior wrap up. (Read 144625 times)

THK Matt · « **Reply #480 on:** Jun 07, 2012, 08:40:02 AM »

I will be looking over your build for mods i want to do with my 86. expect questions lol

OCDswag · « **Reply #481 on:** Jun 07, 2012, 10:14:47 PM »

Kudos on the build!
The attention to detail in this entire truck is amazing. You have one badass rig.

Russell_G · « **Reply #482 on:** Jun 07, 2012, 10:27:30 PM »

Thanks...Hope it turns out well

Russell_G · « **Reply #483 on:** Jun 08, 2012, 09:25:05 AM »

Just got a call From Brian. Looks like I should have a Diamond next week!

Zs Confederate Toy · « **Reply #484 on:** Jun 08, 2012, 10:52:27 AM »

Woo! Have it in for the Jambo?

yota_krawler · « **Reply #485 on:** Jun 09, 2012, 09:00:09 PM »

Quote from: OCDswag on Jun 07, 2012, 10:14:47 PM

Kudos on the build!
The attention to detail in this entire truck is amazing. You have one badass rig.

x2

Russell_G · « **Reply #486 on:** Jun 10, 2012, 11:38:42 PM »

Thanks guys!

I should have the Diamond in for the jambo. Tire carrier will be done. Interior may not be and the paint work is questionable for now. I may get lucky and have some stock SR5 panels in so the interior doesn't look like its empty

Got the 3rd out of the rear tonight and the spring perches and shock tabs tacked in place. While the 3rd is getting gears i need to get the brake lines bent, the tabs welded on to hold those and the rest finish welded. I'm also shaving the drain plug. The diamond getting here this week will let me spray the axles...Thinking about shooting them with a gun this time. I want em to be glossy as hell for a while.

Russell_G · « **Reply #487 on:** Jun 15, 2012, 10:19:13 AM »

Zs Confederate Toy · « **Reply #488 on:** Jun 17, 2012, 04:27:14 PM »

Siiick! Get on it haha

Russell_G · « **Reply #489 on:** Jun 17, 2012, 10:31:27 PM »

Been working at it any free time I get. Jay said he may come up this weekendish and help me wrap it up.

Volcom · « **Reply #490 on:** Jun 17, 2012, 10:48:37 PM »

Quote from: Russell_G on Jun 15, 2012, 10:19:13 AM

So nice!!!! I can't wait to see this axle under your rig!

Russell_G · « **Reply #491 on:** Jun 18, 2012, 12:13:49 AM »

Thanks! Cant wait to have it under my rig.

Zs Confederate Toy · « **Reply #492 on:** Jun 19, 2012, 01:44:15 AM »

Quote from: Russell_G on Jun 17, 2012, 10:31:27 PM

Been working at it any free time I get. Jay said he may come up this weekendish and help me wrap it up.

That would be nice.

Russell_G · « **Reply #493 on:** Jun 19, 2012, 09:26:03 AM »

Yeah is a great welder and super OCD like me so its nice.

Russell_G · « **Reply #494 on:** Jun 22, 2012, 01:12:04 AM »

Axle is under it..Letting it sit a day or so to settle back out and check the caster.

THK Matt · « **Reply #495 on:** Jun 22, 2012, 11:19:14 AM »

that looks trick as hell bro!

Russell_G · « **Reply #496 on:** Jun 25, 2012, 12:39:13 AM »

Thanks! its all painted and under the truck now. I have to put the knuckles together and the brakes and stuff on...The heavy part is done.

Russell_G · « **Reply #497 on:** Jun 28, 2012, 02:16:41 AM »

more to come.

THK Matt · « **Reply #498 on:** Jun 28, 2012, 11:43:31 AM »

wow!!

BUDDERS · « **Reply #499 on:** Jun 28, 2012, 02:36:58 PM »

Wow, that thing's wide! I could never get away with that width in Southern California. Too many cops....

pumkin toy · « **Reply #500 on:** Jun 28, 2012, 04:52:31 PM »

lookin good man!

Russell_G · « **Reply #501 on:** Jun 30, 2012, 12:53:27 AM »

Thanks guys!

I'm wrapping up some little stuff this weekend but waiting on a big brake kit to show up this week so i can drive it.

The best part is the guy i have wanted to do my interior called me to day to come check out the truck. im 99% sure hes going to do it.

pumkin toy · « **Reply #502 on:** Jun 30, 2012, 08:54:46 AM »

truck looks badass with the wider stance! i'm suprised to see your garage such a mess, dont you have a mild case of OCD? haha

BUDDERS · « **Reply #503 on:** Jun 30, 2012, 05:01:28 PM »

I wonder if you'll have to do any trimming now once it's all flexed out?

THK Matt · « **Reply #504 on:** Jun 30, 2012, 07:50:24 PM »

Holy smokes dude, i need to hire you come up north and restore/build my 4runner! that think fkn sick.

Russell_G · « **Reply #505 on:** Jul 01, 2012, 11:19:13 PM »

Quote from: pumkin toy on Jun 30, 2012, 08:54:46 AM

truck looks badass with the wider stance! i'm suprised to see your garage such a mess, dont you have a mild case of OCD? haha

Thanks! Yeah it freaked me out.Its not that messy now but still makes me uneasy. I just need to get it done and i will be scrubbing the floor and busting out the pressure washer. I may try grabbing a pop up before jambo so it will get messy again lol

Quote from: THK Matt on Jun 30, 2012, 07:50:24 PM

Holy smokes dude, i need to hire you come up north and restore/build my 4runner! that think fkn sick.

LOL thanks! Up north where?

Quote from: BUDDERS on Jun 30, 2012, 05:01:28 PM

I wonder if you'll have to do any trimming now once it's all flexed out?

I wonder the same thing. Before my truck hardly rubbed. It would flick the plastic fender liner at full stuff and turn. Now i have softer bumpstops and wider stance. My buddy did the same axles on his 95 and had to trim up front. My rear i think will be fine cause i cut the bed up and added the bumper.

More pics coming once the brakes are on and its mobile.

THK Matt · « **Reply #506 on:** Jul 02, 2012, 03:37:53 AM »

Quote from: Russell_G on Jul 01, 2012, 11:19:13 PM

Thanks! Yeah it freaked me out.Its not that messy now but still makes me uneasy. I just need to get it done and i will be scrubbing the floor and busting out the pressure washer. I may try grabbing a pop up before jambo so it will get messy again lol
LOL thanks! Up north where?

I wonder the same thing. Before my truck hardly rubbed. It would flick the plastic fender liner at full stuff and turn. Now i have softer bumpstops and wider stance. My buddy did the same axles on his 95 and had to trim up front. My rear i think will be fine cause i cut the bed up and added the bumper.

More pics coming once the brakes are on and its mobile.

man I live in North Idaho lol

Russell_G · « **Reply #507 on:** Jul 03, 2012, 10:40:22 AM »

Ah thats a bit farther then...Bring it down and we can sort it lol.

I may drive her tonight! If my rotors and pads show up i should be good. I decided not to go white on the calipers again.

It looks much brighter in the pics. Its the same god as brembo uses on their calipers.

Here is the rear all ready to go other then brakes and i Need to stick the driveshaft in and run the ebrake cables.

CSR73 · « **Reply #508 on:** Jul 03, 2012, 11:10:12 AM »

Beautiful work, as always!

Russell_G · « **Reply #509 on:** Jul 03, 2012, 11:57:47 PM »

Quote from: CSR73 on Jul 03, 2012, 11:10:12 AM

Beautiful work, as always!

Thank you!

Ok didnt get much done today but its still progress.

With the wheels on.

With the wheels off.

Part of the reason i didnt get much done...A buddy of mine had his fuel filter brake on the trail. We had to run one up to him...While he was fixing it we decided to hike up to what was the trail head for boulder carnage. This was where we spent days on top of days wheeling when my truck was ifs. Stock could do it with some damage but everything could have fun..buggies included.

Here is my Girl standing in front of the start of the trail now over grown...It was closed a few days after Nate flopped my truck.

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Russell_G [OP]

Related Topics