93 IFS Curb Crawler

[79coyotefrg]

sounds like the timing was off and bent all 4 exhaust valves

[79coyotefrg]

it spins freely til it hits a little hard spot...

that sounds about par for a set of bent exhaust valves

[79coyotefrg]

simple to diagnose, back adjustment off on all valves and see if it rotates any different

[twistedtoy92]

thats a bummer.....

[yotaneck13]

uu need a new motor bro mines holdn strong jushit 6k yesterday not problems except the elusive vac leak i have and ive beat her pretty hard in them 6k bring me the pats ill build u a bullet proof re

[PA_taco_13]

sounds like the timing was off and bent all 4 exhaust valves

yep definitely jumped time.  the truck is leaking around the intake valves....

i knew i shoulda got a new motor 

[79coyotefrg]

yep definitely jumped time.  the truck is leaking around the intake valves....

i knew i shoulda got a new motor 

just replace the bent valves,   was this engine just rebuilt??  if it was just replace the bent valves,  if not then you should have the head rebuilt

[PA_taco_13]

can anyone help me with a bolt question. i need to get stock body mount or cab mount bolts for my truck. I'm going to install a energy suspension body mount kit <urethane stock hight> and want to know what bolts to get before i get to the project.

found this on yotatech:  yeah, they're metric 10 mm diameter x 80 mm long with 1.25 threads per mm.
80 mm is about 3.5 inches

    is this right for a 93 extended cab truck? I think the guy was commenting on 4runner bolts

[yota4x4sc]

 

[THK Matt]

just replace them with Grade 8 hardware.

[79coyotefrg]

Brian, 80mm is really close.  I might have some that are in good shape. theynever seen any snow   I'll look tomorrow.

[PA_taco_13]

   sweet glenn!. let me know what ya got and how much. 

[79coyotefrg]

  sweet glenn!. let me know what ya got and how much. 

send me a pm tomorrow and remind me cause I forgot to check today

[JanMarie13]

Ummm......   words or something?   I was instructed to post these pics:   

  It's still on the trailer cuz it needs to be aligned before we can drive it anywhere.  It's getting aligned on Wednesday.

[IronClad]

that diff sure is red

[wakkjobb]

I was gonna say I missed living back east until I saw the rust 

Any word on another engine or repair or whatever?

[PA_taco_13]

Red red knock'em dead. I had a bunch of stuff just layin around collecting rust it seemed, so I painted it all. I found a little can of red caliper paint in the shed so I put it to use. calipers, rear drums, lift parts and the diff.

I wish i could drive the truck but it needs aligned

new stuff= engine, poly bushings front to back,poly bump stops, superlift 4", sr5 oil pressure sender, torsion adjust bolts, eccentric bolts caster/ camber, 4 ball joints

slightly used stuff= 5.29's front and rear, lower arms right and left, sr5 gauge cluster

needs= upper bump stops installed, cab mount bushings installed, bushings, shackles n shocks for the rear.

[PA_taco_13]

I was gonna say I missed living back east until I saw the rust 

I'm gonna do my best to take care of that rust 

[79coyotefrg]

ditch the sway bar

[THK Matt]

Red red knock'em dead. I had a bunch of stuff just layin around collecting rust it seemed, so I painted it all. I found a little can of red caliper paint in the shed so I put it to use. calipers, rear drums, lift parts and the diff.

I wish i could drive the truck but it needs aligned

new stuff= engine, poly bushings front to back,poly bump stops, superlift 4", sr5 oil pressure sender, torsion adjust bolts, eccentric bolts caster/ camber, 4 ball joints

slightly used stuff= 5.29's front and rear, lower arms right and left, sr5 gauge cluster

needs= upper bump stops installed, cab mount bushings installed, bushings, shackles n shocks for the rear.

strip it to a bare frame and POR15 that pregnant dog!

[unclejpl4x4]

you know bri if U ever wanna just give up  you can drop it in my driveway

[PA_taco_13]

  got my rig back!

[JanMarie13]

got my rig back!

   Which means I got my 4Runner back!!!   

[JanMarie13]

Behold....2 new pictures for your viewing pleasure.

EDIT:    Apparently this was not simply for viewing pleasure.  I just realized these pics are from two different days, and the purpose is to compare wheels.  Do we like the black wheels in the top pic, or the other ones in the bottom pic?  Oorrr the simulated beadlocks from earlier in the thread?

[unclejpl4x4]

black wheels

[GJToyotabug]

ya know i see a bunch of trucks that have a lift like that and for some reason it doesnt look like their that much higher than mine and i dont have hardly any lift.


i vote black for sho!

[46&2]

I like those rims best myself.

[PA_taco_13]

ya know i see a bunch of trucks that have a lift like that and for some reason it doesnt look like their that much higher than mine and i dont have hardly any lift.

funny you should say that. my truck is a giant mess right now. the first pic ( passenger side with the blk taco wheels ) the front is lifted with a 4" super lift and the rear is a 2" add a leaf 265/75/r16 tires.  the rear needs to come up another 2 to 3 inches. you can"t really tell in the pic it looks like i have about 700 lbs in the bed to see the truck in real life. the second pic ( driver side 5 star alumies ) cranked downey torsion bars and same 2" add a leaf 31x10.5 r15

[GJToyotabug]

give me a call sometime i can build a 3 leaf add a leaf kit that eleminates the overload and ive been hearing about 3inches of lift with just the kit. or new springs!

[PA_taco_13]

Merry Christmas to me