tons 2rz three link front. Now slamming on its nuts spring under rear!newpics

[89sastoyo]

mine get super squishy like anyhting under 4 they are about the hieght of a 33 if that haha they just dump down super low so i usually run 6 in the front and 4 in the rear sometimes more but thats my usual

[89sastoyo]

I got some stuff done tonight...

I braced my back cross member which has my recovery point attached, I didnt want it to bend so here ya go

[toyotanner]

what i would have done is cut that stock crossmember out and had those braces you put in go to the frame but thats just my

good work though and theres nothing wrong with having a tall truck if anything its nice cause you dont have to hear your tires rub all the time haha

p.s. i can see the sweet fart can

[89sastoyo]

what i would have done is cut that stock crossmember out and had those braces you put in go to the frame but thats just my

good work though and theres nothing wrong with having a tall truck if anything its nice cause you dont have to hear your tires rub all the time haha

p.s. i can see the sweet fart can

Haha yeah it looks good to but im going to lower it back down i have some springs and stuff to re-do it all with i just dont have much time cause im working a lot. I was thinking about going to the frame but I didnt really want to cut that one out and I figure it would hold i mean it would take a lot to rip that off. I also figured it would be stronger to brace it in towards the D ring that way its not weak in the center where it would be yanked on.

[89sastoyo]

Ive got some updates been cleaning stuff up and getting done.

heres a couple pictures of the hangers I made today came out sweet.





HAH heres the difference between what the previous owner had put on and what I did today and this is my reason for making new ones..







I also got around to getting my sliders made and mounted. Here are a couple pictures of the plates and triangle gussets I put on them. I figure this would help since I tatered the other ones.



Ill post some pictures of it on springs tomorrow there on my dads phone cause mine always seems to die when im in need of pictures. And sorry about the cell pics my camera broke at the dunes a while back haven't replaced it yet.

[Halladay]

 

[Halladay]

yo check this out and help us out....
http://board.marlincrawler.com/index.php?topic=62832.new#new

[89sastoyo]

you should see the hoop-d it looks pretty good. If you have a chance sunday you should come help me get the bed on and max is getting his truck together hopefully it should be a wrenchin party...

[Halladay]

ill be elk hunting.. i leave saturday morning at 3 am so thats a no go... haha

[89sastoyo]

haha its legit are you finally gonna start wheelin after that trip???

[89sastoyo]

I got a little more done on the truck tonight. I got the duals back together converted to forward shift again so i dont have a dead shifter like I did.  Braced up the cross member for the duals to get it a little stronger. Sunday I should have it completely together only things I have to do are mount passenger side slider put the cases in put the bed on and mount the fuel cell.

The next are re-do the floor and some other things interior wise but for the mean time I think ill wheel it a little and see how she does im tired of workin I wanna play a little lol.

[GrenadedToy]

what is taking so long? my truck is running already. lets go wheel.

[89sastoyo]

what is taking so long? my truck is running already. lets go wheel.

Ya right if your serious I think i may have just myself?? ahah

but its going to browns tomorrow and im going to run crushers so that means it will be done.

[89sastoyo]

heres a couple pictures of how it sits and pics with the bed sittin on it. I didnt end up going wheelin today got it all together last night just finishing it up and my shift forward shift rail wasn'y allowing my front case to shift into high because it was hitting the divider in my tranny so i'm thinkin I got the wrong shift rail?? not to sure but I ended up pulling the cases and splitin gthem done re-doing everything it was a pain.


creeper joints...


huge shackles I made for it



just a couple poser pics parked in the bushed at my house




New front axle




New rear spring set up soon to be new housing and diff armor



And some pictures of how she looks with the bed.




Next mod

[86bobbedtoy]

gotta love the 3rd gens

[89sastoyo]

deffinetly I'm the only person who wheels one with the group I wheel with I like it, and third gens in generall for sure.

[ordan300]

 

Hey I go to browns with some frends her are some pics of trucks thst I've done got a jd3 square bender and fab tec computer program for bending
NICE PICS AND VIDS TOo!!!!!
http://www.webspawner.com/users/toughtrucks/

[toyotanner]

Hey I go to browns with some frends her are some pics of trucks thst I've done got a jd3 square bender and fab tec computer program for bending
NICE PICS AND VIDS TOo!!!!!
http://www.webspawner.com/users/toughtrucks/

i sware you're just on here for business purposes 

but who could blame you in this economy 

[ordan300]

 
Nope just for beer and a good time!!!!!

[89sastoyo]

well I have acess to a bender but nice work. If your down to go wheelin sometime i am always down when my is together.

[oregonwheeler]

I like that fart can muffler

[89sastoyo]

I like that fart can muffler

Thanks man you wouldn't believe me but it sounds really good I love it. It isn't your average cherry bomb or flowmaster. It's loud but idles quiet i dont know just unique and doesnt sound bad

[THK Matt]

wtf is up with your 4runner grille conv?

[oregonwheeler]

it works. As long as it doesnt sound like those honda's.

[89sastoyo]

wtf is up with your 4runner grille conv?

Its a 96 taco grill cut to hell with HID's out of a 92 4 runner with 89 marker lights. They look like poo but what ever there bright and my old ones were horrible to wheel at night with and the brights didn't work lol.

[89sastoyo]

it works. As long as it doesnt sound like those honda's.

hah it doesn't it sounds a little ricey but not that bad. Me and like 3 soon to be 4 buddies have them they sound sweet on the trail

[89sastoyo]

Measuring for bump stops





Making the bump stops




4x4 sheet of 3/8 I got for plating and gusseting stuff

capping the bump stops













Teggy seats

[89sastoyo]

let me know what you think? comments or criticizm I never really get feed back on anything lol.

[89sastoyo]

Oh yeah and I kinda beefed up teh cross member this is temporary some what because I'm waiting for marlin to get the clocked adaptor back in so I can run one of those and have a full flat belly without my tranny hitting the firewall.

[89sastoyo]

I'm about to go out to the shop and get some more done probably won't be a super late night I have work in the morning and its an hour drive out there so we'll see. I am going to try and get the rear bumps done and hopefully run out of gas so I can bring the bottle back into town to get it filled. I will probably finish bolting my bed down and clean up my tail light wiring a bit the passenger side is all hacked together. I will post some pictures of the bumps later tonight.