New member from NJ, please help me with my 79 S/B 4x4 Toyota pick up project

Started by Zack1978, March 10, 2009, 04:56:16 PM

0 Members and 1 Guest are viewing this topic.

Zack1978

Hi everyone,
   I just wanted to say hello, and hopefully get the ball rolling on my project! I own a few Toyota's including my 79 4x4 pick up and my FJ60, but the pick up is now the focus.
   The 79 4x4 S/B is 100% stock, even the wheels and hub caps! The truck currently has 37,000 miles on it. The first 20,000 miles were put on between 1979 and 1982, and the remaining 17,000 were put on between 82 and 09. Since 1982 the truck was only used as a parking lot plow truck. The problem with the truck is RUST! The bottom line is that the frame and the body are way beyond repair.
     So my goal is to find a good 79 4x4 S/B (without rust) that I can swap everything over from my truck. I don't care much about the engine or trans, as I have all good parts. Without a doubt rust is the biggest concern. I think I could go as far as 1983 for a donor truck, but I want the 79 dash and round headlights? At this point I can't post in the class section, so I also need to get my post count up.   So if anyone knows of a stock 79 S/B 4x4 without rust, please let me know, I need a summer project! I want this truck to have it's former glory back!

Thanks,
Zack

Rocksurfer

I was getting all excited that this may be a pristine rig and you go and bust my bubble.


:welcome: II  :turtle: anyways
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

:welcome: from Arkansas


you'll need to look to the southern states for a good 79-83 cab

all your 79 stuff will swap right into the 83 cab (if thats what you find)

if you keep the 20R and L43 transmission  any year cab will work fine, but if you swap to a later 5 speed  you'll want to find a 81-83 the trans tunnel is taller in those years

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Zack1978

Quote from: Rocksurfer on March 10, 2009, 07:44:45 PM
I was getting all excited that this may be a pristine rig and you go and bust my bubble.


:welcome: II  :turtle: anyways

Well if you don't count the rust, it is pristine! The truck is TOTALLY original, with the exception of tune up parts, and three tires the remainder of the truck is as it rolled off the assembly line.

Zack

Toymin8r

Unclejp4x4 is from NJ but all he's good at is drinking :beer: and stinking up your bathroom so I don't know how much help he would be.
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE
AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE.

IF YOU CAN'T FIX IT WITH A HAMMER, YOU HAVE AN ELECTRICAL PROBLEM.


QuoteBeccaLoo24 – i can toss grown men.... so dont doubt me

Zack1978

Quote from: 79coyotefrg on March 10, 2009, 07:52:26 PM
:welcome: from Arkansas


you'll need to look to the southern states for a good 79-83 cab

all your 79 stuff will swap right into the 83 cab (if thats what you find)

if you keep the 20R and L43 transmission  any year cab will work fine, but if you swap to a later 5 speed  you'll want to find a 81-83 the trans tunnel is taller in those years




I want to keep everything from the 79, even the round headlights, I am not a fan of the square lights.

Zack

kneedownnate

RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Zack1978

Quote from: Rocksurfer on March 11, 2009, 10:22:10 AM
You can mount the roundeyes in the square hole.

Great, now all I need to do is find a quality donor truck!

RK

Max
Black Hole Racing - 84 Jackalope/79 Devil Bunny/87 Golf - Service rig: 2012 Ram 3500

Tallchevy

:angry: My child is an honor student at Anton Levay's School of Satanic Arts :angry:

87 4Runner redo
http://board.marlincrawler.com/index.php?topic=41959.0
87 Toyota 4Runner, SAS Rig Gallery
http://board.marlincrawler.com/index.php?topic=29877.msg3

79coyotefrg

Quote from: Toymin8r on March 11, 2009, 07:12:05 AM
Unclejp4x4 is from NJ but all he's good at is drinking :beer: and stinking up your bathroom so I don't know how much help he would be.
:rofl: :rofl2: :rofl:


Quote from: Zack1978 on March 11, 2009, 09:23:29 AM

I want to keep everything from the 79, even the round headlights, I am not a fan of the square lights.

Zack
the holes are in the body to mount the round headlight buckets in the 82-83 trucks but you have to find small bolts cause the y dont have the nuts welded on those holes



wheres Joe at :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Redbeard1

If you dont stand behind our Troops... you can stand infront of them...
Project Pete==> http://board.marlincrawler.com/index.php?topic=43370.0
85 Toy: Built 22re, locked F, spooled R, 5.29's, R151F, MCO7 duals, Sky x-member 37 MT/R's on jack stands  
__________________________________________
||____________||____________||___TOYOTA ___||
||____________||____________||_____________||




RIP Bobby Long

unclejpl4x4

:cheer:  im here :cheer:   welcome to marlin from NJ   

and may i be the first to say :worthless:




o and MC NJ area http://board.marlincrawler.com/index.php?board=78.0


build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

*** YELLER ***

MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Zack1978

Thanks everyone! I still have not found a good truck............Any leads?

Thanks,
Zack

Zack1978


unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

00taco