Wampum's 85 EFI (Sold)

[Thomas P]

heres a pic of my old bed right before i swapped it, this is the worst side, keep in mind trhat it can be yours for free! i will even deliver it!

[THK Matt]

They say that you can do either, it comes in a spray kit though and I sprayed it. Worked really good. I did the area behind the rear seat, and also the bed rails. It hasn't chipped or faded at all.

))--SLIVER-->

Awesome!
what kit did you buy?

[wampum]

To Thomas: That bed is really decent Thomas, and free is definitely a good price. Let me think about it though. I'd like to find an early style one that has the lip and the hooks, but not the flat fenders like 2WD.

To SLIVER: How much did the paint/bed liner cost?

[THK Matt]

To Thomas: That bed is really decent Thomas, and free is definitely a good price. Let me think about it though. I'd like to find an early style one that has the lip and the hooks, but not the flat fenders like 2WD.

I have the style like tom's.
its show car quality.

No dents or rust
and the tail gate works like new.
I wish I was in Cali where the market for Toy parts was greater.

[wampum]

I have the style like tom's.
its show car quality.

No dents or rust
and the tail gate works like new.
I wish I was in Cali where the market for Toy parts was greater.

You're in Idaho right? Yeah, I have seen how nice yours is in your pics. $200 bucks is a little steep for me anyway, I'm looking for something a little junky that I can get for cheap to free. I'm gonna end up cleaning it up and all when I paint everything.

[808]

i even have a free tailgate to match thomas's for free too. but you have to come pick it up because i hate you

[THK Matt]

You're in Idaho right? Yeah, I have seen how nice yours is in your pics. $200 bucks is a little steep for me anyway, I'm looking for something a little junky that I can get for cheap to free. I'm gonna end up cleaning it up and all when I paint everything.

Yeah Idaho for now, Ill be Cali, possbly for good, next fall/winter.

if your going to "trash" it, Thomos' isn't bad at all


beats the hell out of 1200 for a brand new bed from Toyota.

[Thomas P]

To Thomas: That bed is really decent Thomas, and free is definitely a good price. Let me think about it though. I'd like to find an early style one that has the lip and the hooks, but not the flat fenders like 2WD.

hate to burst your bubble but that bed with the lip only came on 2wd's and only with the flat fenders, unless you get a first gen bed with the hooks, which the body lines arent quite perfect. You see some 2wds with the 4wd bubble fenders but no lips on the side. My bed is going to the scrap yard pretty soon, so if you end up wanting it hit me up asap

[4x4yota]

actually there is a 4wd near me that has the 4wd fender on the bed and the lip on it (it could be custom)

[wampum]

I was just browsing the board here and I cam across Doable's rig. It's making want to keep my 2WD and just cut it like his. I think it looks good.

[wampum]

hate to burst your bubble but that bed with the lip only came on 2wd's and only with the flat fenders, unless you get a first gen bed with the hooks, which the body lines arent quite perfect. You see some 2wds with the 4wd bubble fenders but no lips on the side. My bed is going to the scrap yard pretty soon, so if you end up wanting it hit me up asap

Yeah I was pretty sure that the 2nd gen lip would have to be a flat fendered 2WD, that's why I was thinking of going with a 1st gen. But, like you said they don't quite match up. I'm still thinking about a 4WD bed though.

[wampum]

Yeah Idaho for now, Ill be Cali, possbly for good, next fall/winter.

if your going to "trash" it, Thomos' isn't bad at all

That'd be ill if you moved to California.
Thomas has a real decent bed, if I go 2nd gen 4WD I am definitely getting his.

beats the hell out of 1200 for a brand new bed from Toyota.

[wampum]

i even have a free tailgate to match thomas's for free too. but you have to come pick it up because i hate you

quit trying to pawn your free tail gate off on me. i ain't no joke.

[THK Matt]

That'd be ill if you moved to California.
Thomas has a real decent bed, if I go 2nd gen 4WD I am definitely getting his.

fo sho, ill bring my 85 on deez
it will be built by then..


Yeah I looked into a bed when I had my 1st 87.
1200 bucks for a primered 87 4WD SR5 Bed without a tailgate or lighting.
I about my pants when Toyota told me that.

[46&2]

  Booooooo keep the 2wd drive bed

[LilChief87]

i like taht 2wd bed shortened it looks sick
                                                             

[wampum]

If you check out that foreign toys thread, they all have beds with lips and hooks, even the 3rd gens! I'm pretty jealous.

[46&2]

If you check out that foreign toys thread, they all have beds with lips and hooks, even the 3rd gens! I'm pretty jealous.

Yeah, Non-USA toyotas are where its at... straight axles in trucks and 4runners until 98... diesels... all with utility style beds... TONS of model trucks and land cruisers we never even got...

[wampum]

Yeah, Non-USA toyotas are where its at... straight axles in trucks and 4runners until 98... diesels... all with utility style beds... TONS of model trucks and land cruisers we never even got...

psh what a rip off huh. It would be so sick to wheel a diesel 3rd gen with factory solid axle. 

[SLIVER]

Awesome!
what kit did you buy?

It's called Raptor liner, made by U-pol I think.
It runs right about $100.00 for a gallon. That price includes a free shootz(spelling) gun.
A 1 gal. kit did my bed behind the seat, bedrails, and the sides of the runner. I still have 1 quart left over.
So it goes a long ways.

I bought mine at Jones Paint and Glass in Provo, UT.

))--SLIVER-->

[wampum]

Well she's still rough around the edges, but I decided to go abuse her anyway up Powellton Rd. It was all pretty fun, until my heater hose popped off and dumped all my coolant on my motor. Of course I didn't realize what was happening at first, until it started steaming in the cab because of the water evaporating. But, after about 6 bottles of water and a little antifreeze, she drove home fine.

[808]

still gay?

[wampum]

The test drive helped me figure out what things I need to get done next.
-Make sure all radiator hoses are tight, and functional. Also, I need a new heater valve, the one I have is stuck.
-Shocks would be really nice.
-Definitely need to trim. So I'm gonna throw on my 2WD fenders and fire up the sawzall.
-Need to get my spare tire mounted.
-A big tool box in the bed would be nice.
-I need to put my new motor mounts on.
-Have front end aligned.
I'd like to get some of that done and then embark on a real wheeling trip.

[wampum]

still gay?

negative

[THK Matt]

It's called Raptor liner, made by U-pol I think.
It runs right about $100.00 for a gallon. That price includes a free shootz(spelling) gun.
A 1 gal. kit did my bed behind the seat, bedrails, and the sides of the runner. I still have 1 quart left over.
So it goes a long ways.

I bought mine at Jones Paint and Glass in Provo, UT.

))--SLIVER-->

AWESOME

so that bedliner kit that walmart sell would work too then.
heck I want to try the rattle cans they have. lol

[Alarri]

.... and what's hapened
Do you have any pictures ¿?
I want to see more ... ¡¡¡
Nice ... nice 
Salu2
AA

[wampum]

Ordered up 12" Bilsteins and hoops off TG today. I also ordered a backing plate eliminator. So I think I am gonna take the hoops to a welding shop and have them cut my old towers off, plate the frame up good, and weld up the hoops. I would do it myself, but I'm a little nervous about my already cracking frame.

[wampum]

I've decided I want to sell this thing. I want a get a more daily drivable truck. Looking into a Extended Cab 3rd Gen. with a 22RE. Maybe I'll turn it into a project after this semester, but I'll probably keep it stock for a while, maybe 33's and some performance mods. Sad to see this thing go, I've got a lot of time into it.

[1981_toy]

i have a 1981 first gen wanna trade??

[wampum]

i have a 1981 first gen wanna trade??

Mainly looking for a newer Yota. I'm big on fuel injection.