Number Two

[Willy Mammoth]

that bolt pattern looks very similar to a powerstroke starter...I'm going to dig a little bit around here for you.

do you have a correct PN?

The International pn is 478049C92 I was given that by a IH dealer and was told they could not get it.

I found a place that has a rebuilt one for $395 plus a $100 core charge plus shipping.

I can buy a new 24V model for $259 and free shipping.

Looks like that is the way to go.

[THK Matt]

The International pn is 478049C92 I was given that by a IH dealer and was told they could not get it.

I found a place that has a rebuilt one for $395 plus a $100 core charge plus shipping.

I can buy a new 24V model for $259 and free shipping.

Looks like that is the way to go.

looks like you found your starter..... ORDER UP!

[Duffil]

hang back for a day or so and let me dig around a bit for you, if you don't mind.

[crawlerdan]

The International pn is 478049C92 I was given that by a IH dealer and was told they could not get it.

I found a place that has a rebuilt one for $395 plus a $100 core charge plus shipping.

I can buy a new 24V model for $259 and free shipping.

Looks like that is the way to go.

is the 24v model a industrial lift application?
if so, i think you can mess with the innards and make it 12v

[Willy Mammoth]

is the 24v model a industrial lift application?
if so, i think you can mess with the innards and make it 12v

Yes it is a forklift starter and I would rather keep it 24v and isolate it from the rest of the eletrial system. My ready welder needs 24v too so having this setup will make it easier to use.

Duffil, go ahead ad look around if you like, I am not ready yet, but will be after I am done with the axles.

Thanks

[subliminaltrips]

oh and i stole the mammoth hauler, its now part of the subliminal recovery team!

[79coyotefrg]

oh and i stole the mammoth hauler, its now part of the subliminal recovery team!

thats good  cause  it was too light duty  to haul the Mammoth

needs something with the big 6 lug axles  and  maybe 4 inch channel frame

[subliminaltrips]

i think he is thinking about a trailer with more articulation. one that he can pull behind #2 over the rock garden! 

it was funny yesterday when he was crawling in his backyard with the mammoth over the power transformer   box and the trailer! i think mwm has pix

[Lady Di]

I have some pics, I don't think I got him when he was on the trailer. I thought he was going to roll off on the fender

I'll look tonight.

[Duffil]

Well I did some hunting and it looks like there is not another starter to replace that one.  I was thinking maybe a powerstroke or a cummins might do it, but it appears to be it's own animal.  18059 Lester number...If the ebay one is new, than it's a pretty good price...my local rebuilder (read: uncle in law)  would pay $175 thru WAI for a new unit, and that should be pretty standard cost on one, so yeah $249 isn't bad.

Or you could sand-cast one.

[subliminaltrips]

Or you could sand-cast one.

plenty of sand here.....

[subliminaltrips]

#2 needs one of these....

http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200308541_200308541

[Cheesemaker]

The old bumper dumper! 

[unclejpl4x4]

[Willy Mammoth]

i want one but i would have 2 modifies it 2 receive a bad or bucket underneath  so poo don't get on my shues

You need  to moov the keys on your keyboard back so you can find them in the dark.

Otherwise you can't speal wort a sit.

[subliminaltrips]

not for use when vehicle is in motion    ......

[THK Matt]

not for use when vehicle is in motion   ......

[subliminaltrips]

any progress, i know he had a whole slew of parts layig around in boxes when i was down there....

oh and i got me a real tow rig finally.... international diesel powered......

[79coyotefrg]

[79coyotefrg]

 

[Gibli]

The Mark+Diane Team,
Congrats on the new arrival, already a few months old with new diapers, shampoos and baby powders ... LOL.

Thought the WM page had stopped at 119 so quickly book marked Oh No not again........

Something for inspiration

Wishing you all the best,
Gibli.

[crawlerdan]

oooo....48?? i built two 48 f1s, a 48 tudor sedan, and a 50 f4 with my dad when i was a mini crawler...me like !!

[KDXSR5]

[Willy Mammoth]

The Mark+Diane Team,
Congrats on the new arrival, already a few months old with new diapers, shampoos and baby powders ... LOL.

Thought the WM page had stopped at 119 so quickly book marked Oh No not again........

Something for inspiration

Wishing you all the best,
Gibli.

Gibli, feel free to post a link to your build here. I am sure some would like to see what you did. I know I wouldn't mind going over it again.

Didn't you use a Toyota engine in it too?

[THK Matt]

i know i would, there is one around the corner from me that looks just like his "before" picture....

[Gibli]

Hi,

Yes I used 1HD-T Toyota in-line 6 Diesel with Automatic transmission, full time 4X4 and electronic locking 3rd Diff.
Flipped the drive side from Left to Right, used the original casing of the speedo retro fitted with gauges from Toyota Surf.

The link to the pictures of Ford F-1 
http://picasaweb.google.com/gibli24/FordF1?authkey=FrfqvjkXqnU

Waiting to see some more pictures of your Truck. BTW a friend in another City of Pakistan has rebuilt a truck like yours with a Toyota Prado 1994 engine and drive train and Toyota axles, will ask him for pictures.

All the best.

[crawlerdan]

wow gibli...im in love with your truck

[Rocksurfer]

 

[Willy Mammoth]

Gibli, that is some realy nice work. You want to do mine? I'm burnt out and can't seem to get motivated to work on it. It's just too hot and I am super busy this time of the year.

I can't wait for it to cool off again.

[Gibli]

You must be kidding, you want me to jump into the fire from the frying pan it's ranging between 95 - 98 F with 70% humidity here and I am hibernating in a air conditioned room till November.