Author Topic: unclejs revamp (playing DR ) (Read 96602 times)

TheTransporter · « **Reply #30 on:** Nov 22, 2007, 09:04:54 PM »

those v-mac units are spendy. I wanted one till i found out how much they were

Cheesemaker · « **Reply #31 on:** Nov 23, 2007, 12:00:57 PM »

Just get one of those inline air tool oilers, and put it on the intake of the pump. I've got one of those old GM a/c pump that is a mile long. I don't think it would work on a toy. I'd like to do a a/c pump on mine eventually.

I wish my engine compartment was clean enough to paint the frame and everything! Up till the day I dropped the motor in mine I was still scraping off grease off everything. Looking good Unc!

unclejpl4x4 · « **Reply #32 on:** Nov 23, 2007, 12:31:53 PM »

grinding on the frame

rust rust rust hole hole rust pics after im done.

79coyotefrg · « **Reply #33 on:** Nov 23, 2007, 12:53:17 PM »

ive heard those dodge V2 compressors will run a 3/4 impact

THK Matt · « **Reply #34 on:** Nov 23, 2007, 01:17:30 PM »

unclejpl4x4 · « **Reply #35 on:** Nov 23, 2007, 02:03:55 PM »

ok here they are i now have 2 holes 2 fix 2marro i will do more grinding maybe welding if not will do sunday

DTB · « **Reply #36 on:** Nov 23, 2007, 02:12:35 PM »

79coyotefrg · « **Reply #37 on:** Nov 23, 2007, 04:01:56 PM »

swiss cheese

brainlessfool · « **Reply #38 on:** Nov 23, 2007, 06:22:16 PM »

is rust bad on the frame? I mean it can't be seen. bondo?

the motor

fordh8r · « **Reply #39 on:** Nov 23, 2007, 07:11:17 PM »

THK Matt · « **Reply #40 on:** Nov 24, 2007, 11:00:18 AM »

jeez son, new or donor frames usually work too

79coyotefrg · « **Reply #41 on:** Nov 24, 2007, 11:41:41 AM »

hey Joe, with that frame that "holy" i would cut a piece of 1/8 inch plate and cover that weak area of the frame like i drawed

THK Matt · « **Reply #42 on:** Nov 24, 2007, 11:43:44 AM »

his body mounts look questionable as well.

79coyotefrg · « **Reply #43 on:** Nov 24, 2007, 12:32:35 PM »

usually they are ok, but he's gotta get some rust killer on there soon

brainlessfool · « **Reply #44 on:** Nov 24, 2007, 12:33:14 PM »

I'd pull the hole thing off and find a new one.

DTB · « **Reply #45 on:** Nov 24, 2007, 01:34:11 PM »

Quote from: ImahoToy85 on Nov 24, 2007, 11:43:44 AM

his body mounts look questionable as well.

I've seen a lot worse

unclejpl4x4 · « **Reply #46 on:** Nov 24, 2007, 01:56:52 PM »

well the big hole is fixed/ but the other side........... is worse then that 2x2 hole i got cut it open 2marrow. and glen i was gona plate the whole rear/ take bed off when spring hits. mounts/exaust should be here mid week so next weeked it's going back 2 geather frame done or not.

unclejpl4x4 · « **Reply #47 on:** Nov 29, 2007, 07:34:47 PM »

o so like my LC stuff came 2 day thurdays..... but some one had 2 go shoping now i got wait till friday

TheTransporter · « **Reply #48 on:** Dec 05, 2007, 05:58:14 PM »

I don't know about you but, there is snow on the ground everywere I go in this state of the garden. do ya got yer mooter in yet?

Plekto · « **Reply #49 on:** Dec 05, 2007, 06:06:27 PM »

There are few things that a welder and enough Diamondplate can't fix...

unclejpl4x4 · « **Reply #50 on:** Dec 05, 2007, 07:27:59 PM »

no the moters not in raedy 2 go in wants 2 go in just no time ......... now snow i can deal with the cold i am hot at 25 with my insolated coverumalls.
Just no wet ground

wish i had a camra intake looks so hot / new exaust

BLACKDOG · « **Reply #51 on:** Dec 05, 2007, 07:37:23 PM »

you done yet?

unclejpl4x4 · « **Reply #52 on:** Dec 09, 2007, 07:51:27 PM »

im hungry

mikerob · « **Reply #53 on:** Dec 10, 2007, 12:26:14 AM »

when are you gonna drop it in?

unclejpl4x4 · « **Reply #54 on:** Dec 10, 2007, 03:05:42 AM »

i did sat night all the pics are on my buddies camra

it's just tranny/moter mounted nothing eals done yet

unclejpl4x4 · « **Reply #55 on:** Dec 10, 2007, 02:29:23 PM »

OK here are some pics

some drunk shade tree mechanic wrenching i was feeling nice

unclejpl4x4 · « **Reply #56 on:** Dec 15, 2007, 10:10:35 PM »

Quote from: 79coyotefrg on Dec 15, 2007, 08:35:32 AM

you not supposed to drop important stuff

well i decided 2 lose a day of wrenching and regroup the shed got cleaned tools put away and stuff / yard work

I found the missing injector seal

I also got grind the T-bar mount and beat over the heat shield for it. The pipe/o2 sensor hits.

Cheesemaker · « **Reply #57 on:** Dec 16, 2007, 07:03:51 PM »

Hurry up, your over half way through December!

Are your gonna run the same injectors. Or did you have them sent off to be cleaned and flowed. I'm glad I had mine done!

unclejpl4x4 · « **Reply #58 on:** Dec 17, 2007, 09:25:33 PM »

well did some work on the moter .............. once aging in the dark 25 out side .
Took off the valve cover and found water siting in the cubby cup on the front of the head

tarp must of leaked and came in the distributer hole. pulled the drain plug and got 1/4 1/2 qt of water out of it

well at least it went right down the front of the t cover and in2 the pan

So i put some oil in that moter and put the hood back on

THK Matt · « **Reply #59 on:** Dec 17, 2007, 09:26:50 PM »

yikes.. i think you should be okay though.

unclejpl4x4 [OP]

unclejpl4x4 [OP]

unclejpl4x4 [OP]

unclejpl4x4 [OP]

unclejpl4x4 [OP]

unclejpl4x4 [OP]

unclejpl4x4 [OP]

unclejpl4x4 [OP]

unclejpl4x4 [OP]

unclejpl4x4 [OP]

Related Topics