Author Topic: Mechanical Test (Read 6025 times)

MiniSimp · « **on:** Oct 09, 2007, 09:15:24 AM »

http://www.forddoctorsdts.com/quizzes/MechanicalAptitude.php

Good test.

I failed. $I\'m Down$

abnormaltoy · « **Reply #1 on:** Oct 09, 2007, 09:29:13 AM »

Quote from: MiniSimp on Oct 09, 2007, 09:15:24 AM

http://www.forddoctorsdts.com/quizzes/MechanicalAptitude.php

Good test.
I failed. $I\'m Down$

Without even following the link...I'm pretty sure I would be escorted off school property. I'll hit the test later today.

Lady Di · « **Reply #2 on:** Oct 09, 2007, 09:51:51 AM »

50 QUESTIONS! I'll have to do that when I have nothing better to do. AS IF

79coyotefrg · « **Reply #3 on:** Oct 09, 2007, 10:00:58 AM »

i made a 78%

Oddmar · « **Reply #4 on:** Oct 09, 2007, 10:04:03 AM »

I passed with 82%...should have taken a screenshot but i didn't.

Didn't realize it was 50 questions till i was on #9.

And some of the questions weren't mechanical questions, they were math questions, and i suck at math...

Most notably the one where..."Piston A is 14 square inches, and Piston B is 2 square inches...if Piston A is pushed down, what will be the force on Piston B"...with numeric solutions presented to the left.

The force will be greater/ faster, but i can't do math...how should i know the correct amount?

*FFC* · « **Reply #5 on:** Oct 09, 2007, 10:09:12 AM »

I wish it would show which ones I got wrong $I\'m Down$

Oddmar · « **Reply #6 on:** Oct 09, 2007, 10:11:06 AM »

Yeah, FFC...i was thinking that too. Then i'd know the area's i need to improve in.

stoken82 · « **Reply #7 on:** Oct 09, 2007, 10:13:29 AM »

got a 78% I thought it was easy... guess i was wrong.

there were a few that i was not sure about. but i guess 10 points isn't that bad. ya i would have been nice to know what i missed

how did you get the picture of the page.

when you take the test if you click the magnifying glass thing after you finish the test it will go through the test and give you the answers...

a little late now that i closed the screen but ya

norcalyoter · « **Reply #8 on:** Oct 09, 2007, 10:34:54 AM »

all you have to do to review your test is click the little magnifying glass in the red tool bar across the top $Beer Chug\'n$

MiniSimp · « **Reply #9 on:** Oct 09, 2007, 10:46:11 AM »

Quote from: norcalyoter on Oct 09, 2007, 10:34:54 AM

all you have to do to review your test is click the little magnifying glass in the red tool bar across the top $Beer Chug\'n$

too late now, I passed it the 2nd time around!

red · « **Reply #10 on:** Oct 09, 2007, 10:52:46 AM »

made an 86

mudmaster · « **Reply #11 on:** Oct 09, 2007, 11:05:43 AM »

76% 380 points

fordh8r · « **Reply #12 on:** Oct 09, 2007, 12:31:44 PM »

first go round...92%

I missed 4 and 2 of them I realized I shoulda picked another answer which I would a been right and hit submit anyway

...Oh well!

Cheesemaker · « **Reply #13 on:** Oct 09, 2007, 01:15:08 PM »

440/88% I pass!

But going back and looking through the ones I missed, I should have thought about them a little longer!

Missed Q's!
#7 Gears~reverse and OD mixed up!

#15 Weight pulley single snatch

#17 Double pulley
#35 Rotational forces (torque)
#38 Fans

#48 Air in cyl.

Like I said, if I thought about the ?'s a little better, I would have only missed 2 maybe 3!

red · « **Reply #14 on:** Oct 09, 2007, 02:15:01 PM »

all but 2 of the questions if i had payed more attention i would have gotten them right. the 2 i didnt know were the 12 volt/24 volt setups, but i've never gone over that before.

Talon84x4 · « **Reply #15 on:** Oct 09, 2007, 02:16:45 PM »

78% $I\'m Down$

Missed just about the same ones as cheesmaker except for the torque

but still

, missed the easy ones.

On the can question, I didn't realize those were openings, I thought they were tabs hanging off the rim....

Bazzi · « **Reply #16 on:** Oct 09, 2007, 02:26:11 PM »

I figure this is pretty good since I ditn´t understand all the consepts.

KDXSR5 · « **Reply #17 on:** Oct 09, 2007, 03:23:19 PM »

I got 80%. I missed 1, 9, 11, 15, 17, 18, 26, 41, 44, and 50.

unclejpl4x4 · « **Reply #18 on:** Oct 09, 2007, 03:45:49 PM »

72%

guess i should of did it non sober

tom w. · « **Reply #19 on:** Oct 09, 2007, 03:51:50 PM »

Mistaken · « **Reply #20 on:** Oct 09, 2007, 04:25:45 PM »

that test reminded me of an ASE test

kneedownnate · « **Reply #21 on:** Oct 09, 2007, 06:28:36 PM »

Quote from: unclejpl4x4 on Oct 09, 2007, 03:45:49 PM

72%

guess i should of did it non sober

We both got the same...... aren't we both mechanics too?

Willy Mammoth · « **Reply #22 on:** Oct 09, 2007, 06:50:30 PM »

86

Who comes up with this stuff?

unclejpl4x4 · « **Reply #23 on:** Oct 09, 2007, 06:58:35 PM »

thats only cause peps posted anwsers U cheated

Willy Mammoth · « **Reply #24 on:** Oct 09, 2007, 07:14:35 PM »

Quote from: unclejpl4x4 on Oct 09, 2007, 06:58:35 PM

thats only cause peps posted anwsers U cheated

Answers? where was that? Maybe I could got a better score.

Which ones did I miss?

kneedownnate · « **Reply #25 on:** Oct 09, 2007, 07:23:04 PM »

Quote from: Willy Mammoth on Oct 09, 2007, 06:50:30 PM

86

That's all?! I'm actually surprised you didn't come closer to acing this!

notajeep · « **Reply #26 on:** Oct 09, 2007, 07:23:12 PM »

I got 39 out of the 50.... Missed passing by one point!

te51levin · « **Reply #27 on:** Oct 10, 2007, 07:54:36 AM »

Well, time for breakfast...

unclejpl4x4 · « **Reply #28 on:** Oct 10, 2007, 01:58:45 PM »

freds40 · « **Reply #29 on:** Oct 10, 2007, 03:38:38 PM »

Gots me a 96. after I got a 70 the first time

MiniSimp [OP]

- Sales Employee -

Related Topics