Mechanical Test

[MiniSimp]

http://www.forddoctorsdts.com/quizzes/MechanicalAptitude.php

Good test.
I failed.

[abnormaltoy]

http://www.forddoctorsdts.com/quizzes/MechanicalAptitude.php

Good test.
I failed.

Without even following the link...I'm pretty sure I would be escorted off school property. I'll hit the test later today.

[Lady Di]

50 QUESTIONS! I'll have to do that when I have nothing better to do. AS IF

[79coyotefrg]

i made a 78% 

[Oddmar]

I passed with 82%...should have taken a screenshot but i didn't.

Didn't realize it was 50 questions till i was on #9.

And some of the questions weren't mechanical questions, they were math questions, and i suck at math...

Most notably the one where..."Piston A is 14 square inches, and Piston B is 2 square inches...if Piston A is pushed down, what will be the force on Piston B"...with numeric solutions presented to the left.

The force will be greater/ faster, but i can't do math...how should i know the correct amount?

[*FFC*]

I wish it would show which ones I got wrong

[Oddmar]

Yeah, FFC...i was thinking that too. Then i'd know the area's i need to improve in.

[stoken82]

got a 78% I thought it was easy... guess i was wrong.    there were a few that i was not sure about.  but i guess 10 points isn't that bad.  ya i would have been nice to know what i missed

how did you get the picture of the page.

when you take the test if you click the magnifying glass thing after you finish the test it will go through the test and give you the answers...

a little late now that i closed the screen but ya

[norcalyoter]

all you have to do to review your test is click the little magnifying glass in the red tool bar across the top 

[MiniSimp]

all you have to do to review your test is click the little magnifying glass in the red tool bar across the top 

too late now, I passed it the 2nd time around!

[red]

made an 86

[mudmaster]

76% 380 points

[fordh8r]

first go round...92%    I missed 4 and 2 of them I realized I shoulda picked another answer which I would a been right and hit submit anyway ...Oh well! 

[Cheesemaker]

440/88%  I pass! 

But going back and looking through the ones I missed, I should have thought about them a little longer!   

Missed Q's!
#7  Gears~reverse and OD mixed up! 
#15 Weight pulley single snatch 
#17 Double pulley
#35 Rotational forces (torque)
#38 Fans 
#48 Air in cyl. 

Like I said, if I thought about the ?'s a little better, I would have only missed 2 maybe 3! 

[red]

all but 2 of the questions if i had payed more attention i would have gotten them right. the 2 i didnt know were the 12 volt/24 volt setups, but i've never gone over that before.

[Talon84x4]

78% 

Missed just about the same ones as cheesmaker except for the torque 

but still  , missed the easy ones.

On the can question, I didn't realize those were openings, I thought they were tabs hanging off the rim....

[Bazzi]

I figure this is pretty good since I ditn´t understand all the consepts.

[KDXSR5]

I got 80%. I missed 1, 9, 11, 15, 17, 18, 26, 41, 44, and 50.

[unclejpl4x4]

  72%

guess i should of did it non sober

[tom w.]

78%

[Mistaken]

that test reminded me of an ASE test

[kneedownnate]

  72%

guess i should of did it non sober

We both got the same...... aren't we both mechanics too? 

[Willy Mammoth]

   86

Who comes up with this stuff?

[unclejpl4x4]

thats only cause peps posted anwsers U cheated

[Willy Mammoth]

thats only cause peps posted anwsers U cheated

Answers? where was that? Maybe I could got a better score.

Which ones did I miss?

[kneedownnate]

  86

That's all?!  I'm actually surprised you didn't come closer to acing this!

[notajeep]

I got 39 out of the 50.... Missed passing by one point!

[te51levin]

Well, time for breakfast...

[unclejpl4x4]

[freds40]

Gots me a 96. after I got a 70 the first time