MCR6

Started by rlwjaw, October 23, 2006, 08:22:26 AM

0 Members and 1 Guest are viewing this topic.

79coyotefrg

:haha:  not that talking to CJ  is a bad thing  :whistle: 


AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

crashtestdummie

now that's a matter of opinion. j/k CJ  :burnout:
get in, sit down, buckle up, hang-on, and watch your head

FFC will always have alittle part of me with her. I never did find that tooth I broke. :rotfl:

Lady Di

Alrighty! The Mammoths and CTENG in KS have our reservations made for an RV park in Fresno near Marlins Shop for Tue & Wed. night and reservations at Placerville, KOA.
We'll probably be meeting up with CT the Sat.- Sun. before and will be caravaning down I-40 with him to the round-up.

:woohoo:  :beerchug:  :hyper:

MUST MAKE MORE LISTS!!  :willynilly:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

unclejpl4x4

sweet
now if i can only find what i did with that darn registration
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Lady Di

 :bat:  it's right there on the MCR Registration page  :eek:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

papa mike

Quote from: MrsWillyMammoth on July 22, 2007, 01:34:00 PM
Alrighty! The Mammoths and CTENG in KS have our reservations made for an RV park in Fresno near Marlins Shop for Tue & Wed. night and reservations at Placerville, KOA.
We'll probably be meeting up with CT the Sat.- Sun. before and will be caravaning down I-40 with him to the round-up.

:woohoo:  :beerchug:  :hyper:

MUST MAKE MORE LISTS!!  :willynilly:
whats the name of said place???

unclejpl4x4

so whos picking me up   and :pimp: me around this yr   :dunno:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Duffil

Quote from: unclejpl4x4 on July 27, 2007, 07:02:10 PM
so whos picking me up   and :pimp: me around this yr   :dunno:
:dunno: heard you were gonna drive out with the Mammoths and CTENG.

:haha:

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

there ya go Joe,  just fly out to Kansas  and ride with AJ
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Lady Di

Quote from: miner mike on July 27, 2007, 06:41:28 PM
whats the name of said place???

In Fresno? It's the Fresno Mobile Home & RV Park.
It's at 1362 N. Hughes Ave.
It's about 5 miles from Marlin's shop. Straight down W. McKinley Ave.

Do you know where it is?
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

Lady Di

Quote from: 79coyotefrg on July 28, 2007, 09:10:37 AM
there ya go Joe,  just fly out to Kansas  and ride with AJ

Well I think we need to have CT's approval first, and that might be more time then Unc wants to take.
We'll be meeting with CT the Sat-Sun. before the roundup, and he'll be caravaning back with us, so he probably won't be back in KS til Tue.-Wed. after the roundup.



Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

79coyotefrg

:down:   yea  your right 
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Lady Di

ALTHOUGH :think:  CT just posted in the shoutbox that Unc would be welcome. If he can take the week off, maybe he could fly back from CA. instead of KS.

Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

unclejpl4x4

i can't take that much time off   i was thinking of flaping my arms and landing in cali like last yr
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Lady Di

That's what I figured :down:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

79coyotefrg

:down:  party pooper  :down:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

crashtestdummie

 :down: I'm going to miss y'all this year.
get in, sit down, buckle up, hang-on, and watch your head

FFC will always have alittle part of me with her. I never did find that tooth I broke. :rotfl:

unclejpl4x4

Quote from: crashtestdummie on August 03, 2007, 01:40:06 AM
:down: I'm going to miss y'all this year.

but  but  ............ :rivers:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Shamb

Sounds like the overwhelming majority's going to be on the trail Friday so I may just use Thursday to get everything ready to go and cruise up Thursday afternoon so i'll be hitting the trail Friday.

For everyone that's cruising in Friday what time do you EXPECT to be hitting trail @ loon ???

I'd like to cruise in with some others to get some pic's and video of everyone.

R.I.P to my Papa, I miss you pops......

Knowledge is power  www.pirate4x4.com/forum

New Buildup in process 85' 4runner "Bad Decisions"
http://board.marlincrawler.com/index.php?topic=52566.0

Check out my 1-ton build up thread
http://board.marlincrawler.com/index.php?topic=22600.0

MiniSimp

Quote from: Shamb on August 03, 2007, 07:48:07 PM
For everyone that's cruising in Friday what time do you EXPECT to be hitting trail @ loon ???
We'll be staying at Robbs Thursday night and hitting the trail early.

Duffil

Quote from: MiniSimp on August 03, 2007, 08:35:06 PM
We'll be staying at Robbs Thursday night and hitting the trail early.
I forgot to ask you about that the other night.
:smack:

rockscrambler

Quote from: unclejpl4x4 on August 03, 2007, 09:26:47 AM
but  but  ............ :rivers:
yes uncle it is true. the chance of me going is slim to none and none is in the lead.
we're born,we roll over,we crawl,we walk,we run,we drive,we install cages,we wheel,we crawl,we roll over,the circle of life is complete.!

"we sleep peaceably in our beds because rough men stand ready in the night to bring violence upon those who would do us harm" to you I say thank you
87 Chevy K5 V10 tonka truck,87 Toyota 4runner
83 Jeep CJ8,sold-76 Dodge W200 & 87 Ford broncoII

crashtestdummie

last year I had no rig but I go this year I have the rig but can't go  :tantrum: it's just not fair
get in, sit down, buckle up, hang-on, and watch your head

FFC will always have alittle part of me with her. I never did find that tooth I broke. :rotfl:

unclejpl4x4

ya well theres a chance now I'm not going  i might have 2 burn my Vaca days on :sick:   my back is messed up aging  lost Thursday/Friday 2 vaca days  still OK... but if i can't  work Monday Tuesday/wensday     i have 2 use my MC6 vaca days    i have a doc note  good till wensday      but i need $$ for bills  so it's like week no pay go 2 MC6 and keel over on the trial and die or  stay home and have $$ and spank my 


off 2 get  x-Radiation
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

TacoStewie

if i am am not building a costco the IFS taco will be there
4THEWKN

Hottrod81

Quote from: Shamb on August 03, 2007, 07:48:07 PM
Sounds like the overwhelming majority's going to be on the trail Friday so I may just use Thursday to get everything ready to go and cruise up Thursday afternoon so i'll be hitting the trail Friday.

For everyone that's cruising in Friday what time do you EXPECT to be hitting trail @ loon ???

I'd like to cruise in with some others to get some pic's and video of everyone.



I'll be cruisin in from Robb's after the hangover wears off.  Sometime mid morning.