Been awhile since I've had any time to work on this.
I found a '98 T-100 4x4 3.4 manual 5 speed that had been rolled that I bought for a donor. Highly recommended to find a complete donor vehicle when doing this swap. I already had a low mileage 2000 3.4 out of a 4runner, and now I have another 3.4 from this T-100. I cant say how much help Mike from Off Road Solutions has been, awesome guy and tons of knowledge.
I mainly wanted the computer and harness for my swap but now I have some extra parts: 3.4 w/ 150k miles, 5 speed transmission/T-case, exhaust components, rear end, etc...If anyone is looking for parts off a '98 T-100 let me know.
![](http://i81.photobucket.com/albums/j228/heelsnhorns/t1001_zps84135a0f.jpg)
I pulled the ECU & harness out, ordered my conversion harness from ORS, worked on the crossover pipe (used parts from all 3 to make 1) and changed out my oil pan (using the 3.0 pan). I snapped 3 studs on the manifolds taking the stock crossover pipe off the 3.4 so now I am going to have to drill them out and possibly re-tap. #joy
On another note, I came across a Dana60U rear axle the other day. Evidently the Dana 60U comes in E350's. Not sure if I will narrow it or go with full width. I sure wasnt planning on a SAS just yet but figured Id get to gathering parts as I came across them. Next will be finding a front end sometime down the road after the 3.4 swap is done.
On the 3.4 swap I am at a stand still until I get the conversion harness, which should be real soon. Mike at ORS expected to have it in the mail any day.
Will update when I can. Happy holidays!