0 Members and 1 Guest are viewing this topic.
yokes in phase ?
CV style
There seems to be some play in the transfer case rear output shaft/bearing, how much, if any, is normal? Should there be any play in the cv end of the driveshaft?http://board.marlincrawler.com/index.php?topic=44075.new#new
You should have pretty much none. Is the rear seal leaking? Also make sure that, If you haven't had your driveline done to fit your config of drivetrain, You also have plenty of spline engagement on the slipshaft. The less engagement you have the sloppier the driveline becomes and can cause issues. Just ask me how I know...
I got the tires balanced today and all four were off a bit. It appears that a lot of the vibration is gone, but I'm planning to replace the t-case rear main bearing tomorrow or Wednesday to eliminate all known possibilities. I pulled the drive shaft yesterday and it appears to be tight. It's getting closer...Big Thanks to BigMike for contacting me yesterday with some information and also Jesse from High Angle for returning my call this morning and being willing to help in any way that he could.
Tires balanced?
Started by 86toyota « 1 2 » General 4WD Discussion
Started by shadowybanger General 4WD Discussion
Started by RogueDogg Toyota Pickup/4Runner Tech 1979-95
Started by dloeffler Newbie Questions
Started by toyotawild Toyota Pickup/4Runner Tech 1979-95