I have been working on the runner the past few days, just havnt taken the time to update. I had some serious issues with making the radiator fit after removing the body lift. I ended up cutting the stock front crossmember out along with the SAS crossmember. I had to bring the radiator forward and down so it would fit where i wanted it. I ended up bending a couple pieces of tube at work to use to build a new front member. I got that all fit and tacked into place today along with a reciever tube installed in it to. I also got the new radiator mounts built and got the radiator mounted. tomorrow I will weld everything out and get my stinger put back on. Then i can get the coolant system hooked up. The upper radiator hose was kinked pretty bad cuz of how tight everything was before. So I had the radiator shop braze in a 90 degree pipe in the upper tank and that should work out really well! Here are some pics of the new front member so far. I will get more tomorrow.
