Plenty of clearance all way around the tire! Good, I didn't want to have to trim that big hole any bigger
Rear tire barely kisses the frame rail at full flex. Nothing to worry about.
I took the fender off to get a better idea of how much rubbing the front was going to have on the firewall rather than on the fender itself (I can trim the fender back later).
This was at full stuff with the bumpstop fully mashed with a level spring. It was rubbing at full turn to the driver's side. I plan on lowering the front bumpstops down an inch and trimming that pinch seam on the firewall for now. I will still have decent compression travel but am limiting it compared to when I ran the 33's.
Closeup of the rubbage. Not as bad as I thought!!! I figured it would have been worse.
