So there's the intake temp sensor installed just the way I like it. It was too dark to test drive it to see if this helps out the flat power band area, so I'll check it out first thing in the morning..
And here's the (+) terminal I installed right on the side of the fuse box. Now I can add any accessories here. It's a direct link to the main 2 awg wire that comes from the battery, so it is separate from the rest of the vehicle's power.
Also note the lower bolt, I buffed off the paint and welded on a mounting nut so now the fuse box is mounted. It looks good too, just check the last pic!
So now all I've got left is the purge canister and the speed sensor, which I am just going to install even if the computer doesnt need it. I dont have ABS or Cruise but I'll hook it up none the less. Hopefully its needed so my time isn't wasted
Also, while rummaging through some stuff in the back yard I found a Flowmaster that belongs to Marlin. It's a 3 chamber and appears to be a 2.25". It was dark and I didnt have time to check it out, so I'll check it out tomorrow. Maybe Marlin will sell it to me!!! Then I can complete the exhaust system.
So what's remaining? The Interior, The Exhaust, Rear Shocks, and the Gas Tank's filler neck is not hooked up yet. And then this baby's off to the ref for inspection!
More work tomorrow, cya then-