talon, all i can say is, WOW!!!! been followin' your truck's evolution since about the middle of '08 and that is some top drawer quality craftsmanship. smokin'!
Thank you, it's come a lot further than I expected when I first started
So I went and got a gas tank, now the quesion I have is what hoses go to what and what wires get spliced to what. I know you have a 22R so it may be different for my 22RE. As I put the tank up under the frame I found out it dosn't fit just right and you do have to move the crossmember, but that is ok I just wish I knew that before I put the body back on the frame and wired rock lights into the cross member. Does anyone show you on the pirate forum (the computer at work won't let me on pirate)?
If you pull the sender, you will be able to see which wire goes to the fuel pump and which two to hook up for the float level. I don't remember off the top of my head but will look tomorrow and see which two I used. As for the fuel lines i'd have to double check that too, I believe the larger diameter is the feed and the smaller is the return, as for your line to the charcoal, I plumbed that one into the vent at the top center of the tank. I will try to find pics for you