THK's 86 4Skinner Build-Up (My Fiancee was hit in my '12 Focus Today)

[86bobbedtoy]

ah there overrated, great family dd and then get them out and turn off the traction control and get all kinds of fun.
maxed it at 147 on the gps last week flat ground, gets up to 130 really quick





ps, page 16 owned ho

[Nimyad]

Yeah that's what I though. And that's why I ski mt Spokane now.

[THK Matt]

ah there overrated, great family dd and then get them out and turn off the traction control and get all kinds of fun.
maxed it at 147 on the gps last week flat ground, gets up to 130 really quick





ps, page 16 owned ho

Is that the 2JZ? in that thing?
147 huh? Ive only hit 125mph in the Focus, labeled at 138 top speed. Im determined to hit that.

Yeah that's what I though. And that's why I ski mt Spokane now.

Its been easy 8 years since i put my feet on a board.

[86bobbedtoy]

the lex reads 160, not possable the r's are gone at 147

[THK Matt]

the lex reads 160, not possable the r's are gone at 147

oh my speedo goes to 150 and redlines at ~6500rpms.

[twistedtoy92]

I test drove a few is300s when I was looking to buy one but i could not find one with a manual transmission..... I love those cars! But then I found an Audi A4 black on black, 6 spd manual, AWD and turbo'd 2.0...... one test drive and I was hooked! Factory governs at 136 around 5200 rpm in 6th... I hit 142 with it down a huge hill but thatll change once I get the tuning software for it and get the hx40 upgrade done. then she will really scream!    I cant wait for some snow down here!

[THK Matt]

Very nice. Lol

Sent from the HO KID network using Tapatalk 2

[86bobbedtoy]

I test drove a few is300s when I was looking to buy one but i could not find one with a manual transmission..... I love those cars! But then I found an Audi A4 black on black, 6 spd manual, AWD and turbo'd 2.0...... one test drive and I was hooked! Factory governs at 136 around 5200 rpm in 6th... I hit 142 with it down a huge hill but thatll change once I get the tuning software for it and get the hx40 upgrade done. then she will really scream!    I cant wait for some snow down here!

what year?

[twistedtoy92]

2003 is300

[THK Matt]

New Poll guys.

The reason for my Yellow Vote! 

Here's a few of my 84:

[IronClad]

Thats one of them colors that has to be done right imo so yeah if you wana spray it right =P

[THK Matt]

Thats one of them colors that has to be done right imo so yeah if you wana spray it right =P

hey my rattle can jobs, have always looked better then your "average" ones. its always cost me about $20 to do a full vehicle. so another $20 is nothin lol Ill see what the fiance thinks.

[86bobbedtoy]

Thats one of them colors that has to be done right imo so yeah if you wana spray it right =P

true, rattle can fades out so quick it would be flat white ish yellow in 6 months
I voted "Keep The Current Black on Blue"

get it wheelin before you paint it again,

[THK Matt]

true, rattle can fades out so quick it would be flat white ish yellow in 6 months
I voted "Keep The Current Black on Blue"

get it wheelin before you paint it again,

Naw Id keep up on the paint, the advantage of having easy touch up paint lol.
But ill probably wait til i wheel it anyways.

[twistedtoy92]

I agree, get it wheelin first! Drivetrain is first priority in my book. My runner is ugly as sin right now but once its running and ready to roll it will deserve a fresh paint job

[THK Matt]

Thanks to Jrock, i now finally have a cold start injector fuel line. Thanks brutha!

Sent from the HO KID network using Tapatalk 2

[THK Matt]

Ya'll have seen what ive put into this.

What would you guys sell/buy this thing for. has a clean title. I WILL not build another vehicle with a wrecked frame and if you guys remember the 85 i had.. this frame is MUCH worse.

Sellin this pig ASAP to find something much nicer to start with.

[tgmaul88]

Ya'll have seen what ive put into this.

What would you guys sell/buy this thing for. has a clean title. I WILL not build another vehicle with a wrecked frame and if you guys remember the 85 i had.. this frame is MUCH worse.

Sellin this pig ASAP to find something much nicer to start with.

whats wrong with the frame?

[THK Matt]

the front does this \-/ so to speak. and i have never noticed til today. which means all of my measurements are off. and I will not deal with a bent frame again.

needs to be gone. need some prices thrown at me.

[tgmaul88]

ive got a 81 toy 4x4 frame ill bring ya!

[tgmaul88]

oh fab it up and plate it out

[THK Matt]

Im not anywhere near being interested in a body swap lol ive done one, and that was too many.

[86bobbedtoy]

quitter!!
its just metal, cut weld ect.
but if you wanna sell it, I dont have any clue what you should ask, 4000 obo go from there?

[twistedtoy92]

I need to see pics!

[IronClad]

just how bad is it tweaked? damn near every toyota frame ive come across is bent in some way

[THK Matt]

I posted it for $1500?

Sent from the HO KID network using Tapatalk 2

[86bobbedtoy]

just how bad is it tweaked? damn near every toyota frame ive come across is bent in some way

x2

[THK Matt]

Im not gonna put my son in this vehicle or my gf or myself. And feel safe with both frame rails tweaked. I do not have the tools, time, space, or reaources to do a frame swap or fix the current one correctly. As it is its like pullin teeth to weld a simple mount on. So its up for sale and im currently looking to trade in my focus for a 3rd-4th gen Tacoma ex cab or dbl cab.

Sent from the HO KID network using Tapatalk 2

[twistedtoy92]

You go through vehicles like I go through beer..... LMFAO! Still post some pics!

[86bobbedtoy]

Im not gonna put my son in this vehicle or my gf or myself. And feel safe with both frame rails tweaked. I do not have the tools, time, space, or reaources to do a frame swap or fix the current one correctly. As it is its like pullin teeth to weld a simple mount on. So its up for sale and im currently looking to trade in my focus for a 3rd-4th gen Tacoma ex cab or dbl cab.

Sent from the HO KID network using Tapatalk 2

it wouldnt be unsafe, id just adjust for it with a sas kit.
you dont gotta lie, you just got bored of it, aint gotta lie to kick it fool







jk, im sure its bent like you say