All Pro Tacoma SAS

[mudaddict]

I thought about something like that but it wasn't to bad of a price to have these made to length like i want. Good news high pressure line is done cheaper then i thought to which is nice now to find fittings and the low pressure line at napa.

[mudaddict]

Spent tons of hours workin on the truck last 2 days. We put a brace in on the frame to keep it from changing well the brace got in my way so i had to modify it.  the coolant hose wouldn't fit right put a big kink it in. So to work i went.
The hose isn't touching the brace there is a gap on the sides to allow for movement to.

Steering shaft is on

Have to redo the drag link,tie rod and panhard they were all the wrong size.

Finished welding all the brackets for the t-case crossmember got that installed painted the link brackets.
Here is the shitty part these brackets are proto types still my truck is one of the first ones with them on it well ran into a problem on my truck we didnt on the silver truck we built with them as well. The cat does not fit. So i will be doing a highflow cat or just straight piping it so it will work.


Another picture of the truck at full droop.

[mudaddict]

Oh and she runs  Had it idling for about a hour.

[95toyrunner]

Must have missed it but what's the wms on the diamond axle and what size coilover you running?

[mudaddict]

Its about 64 its been a while since i measured it but if i remember correctly that's what it is. Im running a 2.5 12in travel CO

[95toyrunner]

Ok cause man I'm linking my taco with a 62 wms axle and it seems like my coilovers are angled in. Did you notch the frame to clear the coilovers?

[mudaddict]

nope dint have to do any notching there is about a 2in gap from the outside of the spring to the frame.

[95toyrunner]

And it clears fine? Could you measure the distance between the shock mounts on your axle for me? Thanks

[mudaddict]

ya i can tomorrow when im back at the shop. also depends on your shock towers and how they are set up.

[95toyrunner]

Yeah that's what I'm trying to figure out now. I'm running a 14" 2.0 btw. I REALLY dont wanna notch the frame

[mudaddict]

inside to inside on the shock mounts is 40in

[95toyrunner]

Thanks man that helps a lot

[mudaddict]

No problem anything else let me know. It was a little hard to measure due to the diff but that's right where it is give or take 1/2 an inch

[mudaddict]

Well i have been on a all out push to get this thing done for this weekend for a work run. but rear diff is out ready for gears.




luckily boss man came back down from montana so he can help me set em up.

[mudaddict]

GEARS

[mudaddict]

And the boss took some time to help out lol. (owner of All Pro)

[mudaddict]

gears are done and installed. wheels back on. All i gotta do is bleed the brakes fill the diff finish the steering  leak i have and extend the drive shaft. ALMOST DONE!!!

[THK Matt]

man you are so close.

[Sal04taco]

this is 1 badass taco. cant wait to see it done and on the trail. 

[mudaddict]

man you are so close.

i should be driving it home today. Matt you have no idea im so giddy right now haha.

this is 1 badass taco. cant wait to see it done and on the trail. 

thank man im stoked to get it out were doing a work even this weekend for a shake down run and then we will see form there next planned even is the round up.

[daniresch]

looking great! can't wait to see it on the trail!!

[mudaddict]

Good morning everyone! Just messing around to see where i run in the front to do some trimming still could go more i love this truck.

[Toy-Cra-Ze]

Truck looks awesome!!! 

[Sal04taco]

is the rear stock or did you put in chromo shafts? and will it hold up with the 529 and 37s?

[mudaddict]

stock rear axle still. We shall see if it holds up lol.

[THK Matt]

Hey muddy, where did you get those headlights and how is the pattern?

[John Doe]

Looks great, but the front seems to be missing something  a bumper maybe?

Have fun on your shake down ride this weekend, cant wait to see this beast on the Con

[mudaddict]

Hey muddy, where did you get those headlights and how is the pattern?

ebay lol. eh they are ok i want to do a retro with a good set though.

Looks great, but the front seems to be missing something  a bumper maybe?

Have fun on your shake down ride this weekend, cant wait to see this beast on the Con

Ya working on that one to got the bumper here needs to be finished welded and then gotta modify my frame because the 98-00 tacomas have a different frame then the rest and paint er up and good to go.

[THK Matt]

ebay lol. eh they are ok i want to do a retro with a good set though.

i kinda figured that. i know the 7x6 rectangle projectors suck and the pattern is horrible so i thought Id ask. you get a better pattern from an OEM housing?

[mudaddict]

i kinda figured that. i know the 7x6 rectangle projectors suck and the pattern is horrible so i thought Id ask. you get a better pattern from an OEM housing?

with stock bulbs not really kind of why im dealing with the pattern im running 55w hid's to so it helps.