MiniSimp's 1985

Started by MiniSimp, January 30, 2005, 10:54:12 PM

0 Members and 19 Guests are viewing this topic.

Print
Go Down Pages 1 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 ... 95
User actions

alwayzbroken

#1200
February 28, 2007, 02:46:16 PM
If you said they were 39.5s I don't think anybody would have questioned it. They look huge sitting there.
If you still have control you aren't going fast enough

unclejpl4x4

#1201
February 28, 2007, 03:06:44 PM
is that the  Irok's baby
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Gittinit

#1202
February 28, 2007, 04:08:40 PM
That kid looks so happy, must be starting a love for big round ones early. :boobs:
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

Yota4life

#1203
February 28, 2007, 04:46:20 PM
Those are bias ply right? Damn even got a full spare, what a baller!
88 Toyota Pickup with some stuff...
Build up: http://board.marlincrawler.com/index.php?topic=11133.160

MiniSimp

#1204
February 28, 2007, 04:50:49 PM
Quote from: unclejpl4x4 on February 28, 2007, 03:06:44 PM
is that the  Irok's baby
:yesnod:
Quote from: gittinit on February 28, 2007, 04:08:40 PM
That kid looks so happy, must be starting a love for big round ones early. :boobs:
Loves the big round ones!!!! :sly:
Quote from: Yota4life on February 28, 2007, 04:46:20 PM
Those are bias ply right? Damn even got a full spare, what a baller!
Yes, bias. :afro2:

*** YELLER ***

#1205
February 28, 2007, 06:34:34 PM
Quote from: Duffil on February 27, 2007, 09:18:30 PM
sorry, that was more for Dave than for you.  :_oops:

Here pigeon  :attention: here pigeon  :attention: have welder will weld  :disturbed: :yesnod:


Quote from: MiniSimp on February 27, 2007, 09:10:39 PM
Might as well if I have to weld it, I think I'd rather wait. :sly:

get your ass up here you jackass  :moon:


:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

MiniSimp

#1206
March 01, 2007, 06:59:37 AM
Quote from: oldyellercj on February 28, 2007, 06:34:34 PMget your ass up here you jackass  :moon:
Workin on it. :yesnod:

*** YELLER ***

#1207
March 01, 2007, 03:25:55 PM
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

MiniSimp

#1208
March 01, 2007, 04:38:19 PM
March 11th, don't forget! :nonono:

*** YELLER ***

#1209
March 01, 2007, 05:26:48 PM
Quote from: MiniSimp on March 01, 2007, 04:38:19 PM
March 11th, don't forget! :nonono:


some how I dont think you will let me  :dunno:


:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

MiniSimp

#1210
March 01, 2007, 07:35:24 PM
Quote from: oldyellercj on March 01, 2007, 05:26:48 PM

some how I dont think you will let me  :dunno:


:usa: :beerwhack:
You are right.

It's going to be a long day in short time, whatever you can do before I get there will help.
Call Jer and see if he can show up that day.

Task list:
Dismount tires
Mount Rollers
Clean off :pokinit: piled on truck
Weld Perches
Replace Right Rear Spring Center Pin
Bolt Up Perches
Connect Brake Lines
Bleed Brakes
Put On Plugs, Wires, Cap, Rotor, Battery, PS Belt
Torque Steering Arms
Torque Front U-Bolts
Fill Rear Diff & T-Case
Load and strap down Boggers on truck and 4Runner

Duffil

#1211
March 01, 2007, 07:53:02 PM
Quote from: MiniSimp on March 01, 2007, 07:35:24 PM
You are right.

It's going to be a long day in short time, whatever you can do before I get there will help.
Call Jer and see if he can show up that day.

Task list:
Dismount tires
Mount Rollers
Clean off :pokinit: piled on truck
Weld Perches
Replace Right Rear Spring Center Pin
Bolt Up Perches
Connect Brake Lines
Bleed Brakes
Put On Plugs, Wires, Cap, Rotor, Battery, PS Belt
Torque Steering Arms
Torque Front U-Bolts
Fill Rear Diff & T-Case
Load and strap down Boggers on truck and 4Runner


:pokinit:, is that all?  that's like 2-2.5 tops!

*** YELLER ***

#1212
March 01, 2007, 08:16:03 PM
Quote from: Duffil on March 01, 2007, 07:53:02 PM
:pokinit:, is that all?  that's like 2-2.5 tops!

exactly 2-2.5 hours of work and 45 min to get to my house from Oakdale short day and a BBQ  :biggthumpup: :beer:





Lets go !!!




:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

MiniSimp

#1213
March 03, 2007, 06:41:49 PM
I'm going the "BB" balancing method so I picked up some 0.20gram Soft Air pellets from Wally World, and a digital food scale to weigh them out. (Not that I wouldn't mind counting out around 1300 BB's by hand. So I cut each back with 284grams of BB's which is 10oz per tire. I'm going to have them mounted and balanced with the BB's after March 11th. For a size comparison I took a shot of the tires next to my stock 4Runner.

Duffil

#1214
March 03, 2007, 06:57:15 PM
don't forget to take them out of the bags. :greengrin:

MiniSimp

#1215
March 03, 2007, 07:04:30 PM
Quote from: Duffil on March 03, 2007, 06:57:15 PM
don't forget to take them out of the bags. :greengrin:
Are you sure? :cheese:

*** YELLER ***

#1216
March 03, 2007, 08:21:51 PM
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

alwayzbroken

#1217
March 03, 2007, 09:20:31 PM
I would be careful where you go with multiple bags of white pellets and a digital scale  :yupyup:
If you still have control you aren't going fast enough

*** YELLER ***

#1218
March 03, 2007, 10:20:20 PM
Quote from: alwayzbroken on March 03, 2007, 09:20:31 PM
I would be careful where you go with multiple bags of white pellets and a digital scale  :yupyup:


Well now I know how he paid for the tires he just bought


:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

unclejpl4x4

#1219
March 04, 2007, 06:15:19 AM
lol i wasent gona say it :-X
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

*** YELLER ***

#1220
March 04, 2007, 06:35:08 AM
well someone has too  :dunno:



:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

MiniSimp

#1221
March 04, 2007, 10:00:31 AM
Hush hush, they're not any good until you grind em back down to powder. :psss:

subbrat

#1222
March 07, 2007, 08:59:35 PM
It will take half a day to find your rig Its covered with junk  :bricks:

MiniSimp

#1223
March 07, 2007, 09:02:17 PM
Don't worry, Dave will clean it all off before we get there.... :thumbs:

subbrat

#1224
March 07, 2007, 09:02:38 PM
What are you mounting the tires on ???

MiniSimp

#1225
March 07, 2007, 09:03:40 PM
Quote from: subbrat on March 07, 2007, 09:02:38 PM
What are you mounting the tires on ???
The 15x8's that are on there now.
Want to mount them for me? :yupyup:

subbrat

#1226
March 07, 2007, 09:05:07 PM
We need to go snow wheeling  :driving:

subbrat

#1227
March 07, 2007, 09:06:52 PM
It whould save you money

subbrat

#1228
March 07, 2007, 09:09:01 PM
you are going to need lift kit befor those tires will fit the runner

MiniSimp

#1229
March 07, 2007, 09:09:26 PM
Quote from: subbrat on March 07, 2007, 09:05:07 PM
We need to go snow wheeling  :driving:
I'll get right on that, after you do some motor work for me! :eyebrow: Bring a power steering belt with you.
Print
Go Up Pages 1 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 ... 95
User actions