Topic: auto tranny swap ?

[nor-cal yota]

Is the bolts that hold on the automatic flex plate the same for the 4/5 speed fly wheel.  Sorry for the neb ?..


Thanks in advance..   

[jrock]

You should replace them anyway.

[WHITE_TRASH]

Yes the bolts are the same for all flywheels.

[lilbuddy]

Yes the bolts are the same for all flywheels.

x2

[86rustbucket]

what u workin on?     besides the obvious 

[nor-cal yota [OP]]

Thanks for the info.

Is the bolts an dealer item?  Or can they be picked upped at Auto Zone/Karen/Pep Boys?


here is a link for the rig I'm building:


http://board.marlincrawler.com/index.php?topic=61680.msg757150#msg757150

[SocalWheeler71]

Yes the bolts are the same for all flywheels.

Wrong

x2

Wrong again

Flywheel bolts are ususally longer than flexplate bolts, since the the flywheel is much thicker.

[lilbuddy]

WrongWrong again

Flywheel bolts are ususally longer than flexplate bolts, since the the flywheel is much thicker.

No, you are wrong.

I put in an 84 Celica GTS Auto motor, used the exact same bolts off the flexplate and also looked and compared them to a flywheel bolt and it was the same.

I have some if you need them Thane

[SocalWheeler71]

Sorry, I guess the 22RE is one of those "exceptions to the rule" motors. I work on a lot of different motors.

[lilbuddy]

Sorry, I guess the 22RE is one of those "exceptions to the rule" motors. I work on a lot of different motors.

No worries... I dont care.

Just was being informitive

[nor-cal yota [OP]]

Thanks for the 411. I did do some searching before I posted the question, and now I have the answer.  Thanks again.



lilbuddy, I will cruz by a later on this afternoon.