Sorta a build thread....

[bleakhorizon]

Figured since i was a new member i would check in, guess its mandatory.  

anyway In Located in Tillamook, close to Brownscamp and sandlake......

I enjoy more than just the toyota side of OHV's, so i can be of help in other aspects as well....

ANYWAYS from the land of cheese.... will post some pics of my junk later....

dont wana put all this crap in my "build thread".... so i changed the name.. and will link to it in my "build thread" lol

[bigarms23]

welcome fron truckee

[Cheesemaker]

DUDE!!!  Finally another member in town!!    

Hey, if you need anything from Marlin, I'm headed to Fresno Sunday!  I'm picking up parts from the man himself.  For my front axle.

So, where do ya work, and whats your name (real)?  I bet you can't figure out where I work?      If you know Rick at Carquest, just ask him about Ryan Zwald.  He'll say I'm a no good SOB who brings him fresh white curd in trade for parts!    

[bleakhorizon]

My name is Toby, I work at the Ford garage here in town slingen parts..... I know Rick well....I used to work with him at CQ, I bought the 4runner that was in his backyard....I wanted that truck that you bought from The Cooks but i didnt want a blown up Turbo truck lol...looks like you have put it back together well however...

My wife works at the factory nights, her name is Amber, she is not working right now however because we have a kid coming anyday now....sure i have meet you at a time or another just not to good with names or faces..........

[Cheesemaker]

Yeah, I remember you.  I just put in a 22re from Dieter in it.  Since I didn't want to mess with the turbo motor.  Cost twice as much to build, and then dealing with the turbo.    Yeah a little more oomph would be nice, but if I want that, I'll build this one up more, or swap in a 3rz later.  The turbo motor ran, just needed gone through, leaking out of both main seals, like a waterfall.  I just wanted to start new.  At the bottom of my signature, is the link to what I did to get it going.  Cooks made me a good deal on it, and it was the best deal I saw out there.  Body was in better shape than any of them I saw for more.  Even though I'm running with a 3rd gen bed.    I'm just gathering parts for my SAS, slowly but surely.  One free piece at a time.  You wouldn't happen to have any straight axle hubs or ifs?  Rick says he has some, but doesn't know where in the brush. 

[TIMS89CRAWLER]

welcome from albany!!! maybe well see ya at browns sometime!

[badshark]

welcome i am fairly new to from tualatin   i love that damn cheese rofl

[bleakhorizon]

yea badshark i just seen yea over on the PBoy site lol..... just gota say it again....love that ivan stewert paint job....

[Rocksurfer]

  to Marland

[83 Crawler]

  im from portland oregon

[badshark]

welcome

[Tallchevy]

2  land

[fade]

Hey I'm from down in florence. We should all plan a trip to browns camp some time?

[TIMS89CRAWLER]

Hey I'm from down in florence. We should all plan a trip to browns camp some time?

were all gonna be up at browns camp for halloween weekend come on up man!

[fade]

I might be able to. I kinda got something goin with the old lady and her friends in eugene that weekend. But if plans change and I can get my buddy to come up with this trailer from medford I'm in for sure and his truck to. But probably not I'll have to get in on the next run.

[yodaman1151]

Never really checked in but I'm in Oregon City. my junk is all stock 'cept a fresh 22re and some sweet bondo work by the p.o. 

[TIMS89CRAWLER]

anybody that wants to roll up to browns for halloween come on up we will hopefully be camped out at lyda camp and wheelin crushers, airplane hill, firebreak all day saturday then be in the can-opener, waterfalls area on sunday and bail out sunday evening when were done wheelin! should be a good time we got prolly 10ish rigs goin with us and im sure there will be plenty more rigs already there!

[axled89]

  to the marlin.   from OR. to.

[Early]

Welcome from the Port, lets see da whip 

anybody that wants to roll up to browns for halloween

goodie  goodie

[46&2]

  from nor cal

[bleakhorizon]

this is how i got er.... stock with a smashed front left...




i replaced the inner fender, part of the core, and the outer fender



and the truck didnt even make it out of the garage before it did a IFS hub swap/matched by a IFS rear also....both stuffed with 5.29s, rear is welded front has a powertrax? i believe



that was all good for a while untill i got the 33's and they rubbed the front fenders.... so i did an RUF swap
shocks are limiting travel in these pics which i will leave till i get longer brake lines




after the ruf i needed a longer front D-line so i made one outa square.... was sorta loud and klunky tho so i ended up maken a round one and am going to use the square shaft for a spare... with my rufs the front shaft only had a 4" stroke which the stock shaft supplies (or has so far) just needed to be 3 inches or so longer



i also had the weber hillclimb blues so i did a weber 180, and a fuel bowl vent mod....



All these pics and i dont even got anything recent lol....i will take some and put them up later.... but thats my story

[Cheesemaker]

Rick tried to sell that 4runner to me.  But I needed a truck.  I need to get with ya when I rebuild my front axle.    What's your drink of choice?

[bleakhorizon]

yea i was the opposite, i had a truck, needed a "family" vehicle.... prob paid a bit much for it, 1200, but i was tired of looking and it ran.... so yea....

Front axle is easy, getting me when im not busy isnt ..... jst lemme know....

BTW, Mt DEW,

[bleakhorizon]

since i have no build thread, and no reason to start one... im just gona throw up some pics i took this wkend after setting up elk camp.....






i really need crossover steering

[Cheesemaker]

The rock pile on the Kilchis!!  Where'd you set up camp at, Sam Downs?  Or farther up the main line?

You working Thursday?  I might just have to pop in and say hi!

[illinoisyotadriver]

welcome to malin from someone who used to live in portland

[bleakhorizon]

the one i went to set up is somewher up the north fork of the west fork of the...........  gesh i dont know... lol i could take yea there, way past Sawtooth, somewhere around fire break 3, it would almost be faster to go up the miami and hit cook creek, but i know the kilchis (just not the names lol)

yea i will be here thursday, just not between 1-2 (fav part of the day LUNCH)

[axled89]

nice ride .

[Cheesemaker]

WAY UP there!!     I know that drive very well.  It's one of my favorite drives.  Mainline Kilchis, to Smith Wright, to FB3, (over to triangulation, dads ashes are there) and down Prowdy.  Thats if I don't go off the back side of Triangulation and come out on the Salmonberry.  It's been awhile since I've done that trip.  It's a good trip. 

[MR.FULL-FORCE]

WELCOME...NICE RIG...