0 Members and 9 Guests are viewing this topic.
he has u bolt flip kits, but cant install the driver's side front due to no hysteerhis crossmember is 1/4"i think his angle is right, he did move the rear shackle hangers back already
Not in the rear he has the stock mount plate under axle.1/4" might be OK, I would have 3/8"And I still say the rear angle is a bit much.
OK, on the flipsDo think on a good rear tire stuff they will lay on the frame again.
I see that your park brake cable is way above the marlin 5" springs? How did you do that and got pics from a different view? thanks
They are 4" springs but lifted me more like 5"s. Where the e brake mounts to the axle is where it gets its height. Not sure what your bracket looks like. I can take a pic of mine later today.Ok im not just doing a shackle lift. I am making extended shackles for the front and the lift is the result. Either or longer shackles front and rear are the norm imo.
Started by 95TacoTruck General 4WD Discussion
Started by lowgeared « 1 2 » Toyota Pickup/4Runner Tech 1979-95
Started by chuck5.0 General 4WD Discussion
Started by ohioyota Engine
Started by Ancich Project Research and Build-Ups