Topic: '92 SAS Front Pinion Angle?

[CJTownsend]

I have just put in my 4" SAS. The front pinion angle appears not to be steep enough. Its almost parallel with the ground. Does this need to be changed or is it ok where it is?

[CJTownsend [OP]]

BUMP

[jonathan82toy]

What size shackle are you running?

[potter85]

how much lift?

[CJTownsend [OP]]

The shackle length is 5 1/2". And the lift is a 4" from MC. I bought the lift almost a year ago and just now got it on the truck.

[808]

i have the same problem with mine
when its in 4wd the whole truck shakes.
either cut and turn the knuckles or get stacked cases

[Steve_925]

you can get shims to rotate it up. you dont want to do to much of angle or the caster will be to high and you'll get death wobble. i think i had a 4 or 6 degree shim on my DD with no problems. its best to get the steel shims and partially weld them on

[CJTownsend [OP]]

I have dual t-cases. So it should be fine with duals?

[jonathan82toy]

With duals you will be fine. Are you running a CV on your front drive line?

[CJTownsend [OP]]

Im running a double cardon on the front and rear drive shaft.

[82juguete]

should be fine with the duals... i have them and 4" springs and no DS binding issues whatsoever.

[potter85]

Im running a double cardon on the front and rear drive shaft.

x2