tons 2rz three link front. Now slamming on its nuts spring under rear!newpics

Started by 89sastoyo, March 15, 2009, 11:46:16 PM

0 Members and 1 Guest are viewing this topic.

83 Crawler

yes he broke rear out put and front driveline

toyotanner


89sastoyo

actually ryan I destroyed my front driveline and broke the input shaft on the rear case.. But yeah I was pretty much wheeling it harder than it ever needs to be wheeled and it last for a very long time.. after I broke the front d line I tried getting up the spot I broke it at in 2wd and broke the out put with some 5th gear high low low clutch dumps
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

mattlosch

but worked awesome on crushers and we took killer lines in upper crushers i cant belive we were the only ones to go over those two huge rocks where i almost flopped
1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

Jud

Quote from: 89sastoyo on July 05, 2010, 02:35:42 PM
actually ryan I destroyed my front driveline and broke the input shaft on the rear case.. But yeah I was pretty much wheeling it harder than it ever needs to be wheeled and it last for a very long time.. after I broke the front d line I tried getting up the spot I broke it at in 2wd and broke the out put with some 5th gear high low low clutch dumps

Rear outputs like to break... Get a cromo one, that's next on my list.
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

89sastoyo

hah I have like six or seven extras there were all with me and then I broke the input not the output.. I was so confused when I did it I probably couldnt have told you what I broke but the next afternoon I realized the output was fine front output was fine but I broke the input so the rear case had no power at all. I had two extra's so I fixed it. My buddy with a 3rz swapped 2nd gen was there and for some reason his front driveline was only a few inches shorther than mine Im thinking because of the bell housing or something but yeah it worked out all weekend.

Here is a video up can opener.. half way threw the night. I dont have and pictures other than yesterday in crushers. Some friends might have some up from later in the evening but I am not sure.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/IhNfOUACmoM&amp;hl=en_US&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/IhNfOUACmoM&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo

taking it to the dunes tomorrow morning
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

mattlosch

your gonna hate those solid bumps in the sand
1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

swapped89

Ya ihadsolid bumps fora while and switched to the tall ones with gaps in them. Nce and squishy :)
SAS 89 p/u 3.0 5speed, bobbed, locked, ready to play in the rocks. or wherever the pavement ends :)
http://board.marlincrawler.com/index.php?topic=61345.0 

a wise man listens and observes more so than he opens his mouth.. and when he does it is valuable information....   (twistedtoy92)

89sastoyo

yeah deff gonna keep my from rallying though I just wanna do banshee hill if I can then ill just cruise around like a thug haha. I only wanna take it cause my bikes not done. Ill probably like cruise it down to the pizza joint and all that good stuff
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

swapped89

SAS 89 p/u 3.0 5speed, bobbed, locked, ready to play in the rocks. or wherever the pavement ends :)
http://board.marlincrawler.com/index.php?topic=61345.0 

a wise man listens and observes more so than he opens his mouth.. and when he does it is valuable information....   (twistedtoy92)

89sastoyo

winchester untill monday morning or sunday night not to sure yet. Max is bringing his quad I have a 450 to ride if it runs I think it has a burnt valve so I dunno yet haha its pretty much gonna be a get there and see thang
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

DoveGray85

Nice video! Can Opener has gotten tougher. I'm not sure if could make it with 35's now.

I found your camp on Saturday. I heard you were sleeping :gap: I managed to find Max and those guys giving Airplane Hill a try.

89sastoyo

thats what I heard yeah I was pretty much done for friday night so saturday I slept in for a wee bit hah. I worked thursday night got off at 7 got to browns at 11 or so and stayed up untill 2am the next morning I was beat. I wish I woke up early though and fixed it in the morning not afternoon.

Yeah can opener is right up there with airplane hill now its pretty hard.

toyota actually did work in the sand I didnt lock the hubs in even. I wasn't really smashing dunes though cause my breaks are pretty much not there but it went everywhere I wanted to
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo

heres some pictures from the 4th didnt get to much this last trip











89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo

89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

gnarrkill

we all need to buy rollers haha and do crushers
79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0

crawln503

-85 ext cab swap on std Toyota frame, 3rz, built narrowed 6 lug 60's duals/4.7 42's iroks
-94 Ford CCLB 12v. 6spd, pump cranked, guages, lifted & lots of other mods:smokin:
-89 ext cab Toyota, 3.4, 5spd on 33's

mattlosch

what happened to you last weekend joel
1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

crawln503

I had some trouble finding a 1/2 ton caliper lol I went thru 12 calipers to find the right one on sat and I was thinking about heading up to browns camp and wheel with you guys on sunday morning but I couldnt go cause it was my mom's birthday :crazy: I kid, I kid. I  :love: MY MOM-E

but I heard it was a good run and I seriously wish I could of went :shocking:

-85 ext cab swap on std Toyota frame, 3rz, built narrowed 6 lug 60's duals/4.7 42's iroks
-94 Ford CCLB 12v. 6spd, pump cranked, guages, lifted & lots of other mods:smokin:
-89 ext cab Toyota, 3.4, 5spd on 33's

mattlosch

It was really good! U coming in a a couple weeks???
1983 caged, 22re, slammed

2006 cummins 6spd... somewhere around 750whp for a tow rig

NorCalToy

Quote from: 89sastoyo on July 07, 2010, 07:56:03 PM
yeah deff gonna keep my from rallying though I just wanna do banshee hill if I can then ill just cruise around like a thug haha. I only wanna take it cause my bikes not done. Ill probably like cruise it down to the pizza joint and all that good stuff

Wheres the dun epics? and a vid rambling up banshee hill?

I wrecked a shitload of times on the bike tryin to get up banshee hill...it was runnin shitty and kept boggin out hard...
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

swapped89

Which banshee hill, y'all talkin bout?
SAS 89 p/u 3.0 5speed, bobbed, locked, ready to play in the rocks. or wherever the pavement ends :)
http://board.marlincrawler.com/index.php?topic=61345.0 

a wise man listens and observes more so than he opens his mouth.. and when he does it is valuable information....   (twistedtoy92)

crawln503

Quote from: mattlosch on August 04, 2010, 09:08:21 PM
It was really good! U coming in a a couple weeks???
yes sir!! this sunday im going to take my stock dana 60 axle shafts to Darrel from KNA offroad, kick'n booty offroad so he can put my 35 spline outers on so I can run my new flanges lol
they look like these but in red :talkingn:

but I talked to darrel he's going to browns camp next weekend 12-15 with his datsun that he's been building for along time lol
I cant wait to see it in action :shocking:
-85 ext cab swap on std Toyota frame, 3rz, built narrowed 6 lug 60's duals/4.7 42's iroks
-94 Ford CCLB 12v. 6spd, pump cranked, guages, lifted & lots of other mods:smokin:
-89 ext cab Toyota, 3.4, 5spd on 33's

89sastoyo

for sure were all going up I guess so you better come dog
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

swapped89

Im commin too, but only sat-sunday. I hope we see Darrel on the trail. He's set up my diffs for me, and hes always got a story or two or three or four... to tell. haha.
SAS 89 p/u 3.0 5speed, bobbed, locked, ready to play in the rocks. or wherever the pavement ends :)
http://board.marlincrawler.com/index.php?topic=61345.0 

a wise man listens and observes more so than he opens his mouth.. and when he does it is valuable information....   (twistedtoy92)

NITE KRAWLERS

Sometimes life is a rock an we need a Yota to get over it an Chevy is like a rock so I'm over it!!!

gnarrkill

wish i didnt work or id come i cant use the dentist excuse again hah
79 toyota duals,caged,40 mtrs

the build thread i dont update
http://board.marlincrawler.com/index.php?topic=65367.0

GrenadedToy

Where are we camping? bottom of canopener?

83 Crawler

Quote from: swapped89 on August 05, 2010, 08:28:56 PM
Im commin too, but only sat-sunday. I hope we see Darrel on the trail. He's set up my diffs for me, and hes always got a story or two or three or four... to tell. haha.

dont worry adam will have storys to tell hes full of them  :cool: