Author Topic: 4runnerchevy and his Chevy powered 86 (Read 67755 times)

sckid831 · « **Reply #270 on:** Nov 18, 2011, 06:27:44 PM »

i got an extra stock spindle if you need it

4RunnerChevy · « **Reply #271 on:** Nov 18, 2011, 07:17:51 PM »

Quote from: sckid831 on Nov 18, 2011, 06:27:44 PM

i got an extra stock spindle if you need it

Bring it by, or I'll pick it up.

4RunnerChevy · « **Reply #272 on:** Nov 21, 2011, 07:34:22 PM »

Everything is installed and working fine. Got a bunch of cleanup to do, and a bunch of wiring. Got some stuff coming from SeaBass. Sorry no pics as of yet, working on that.

4RunnerChevy · « **Reply #273 on:** Nov 22, 2011, 08:43:28 AM »

Radiator and Fan - Check!

Winch - Check!

30 Longs Super Set, Rock Rings and wipers - Check

In-cab winch controls - soon

$Beer Chug\'n$

bigarms23 · « **Reply #274 on:** Nov 22, 2011, 10:57:33 AM »

nice what winch did you get

*** YELLER *** · « **Reply #275 on:** Nov 22, 2011, 11:15:27 AM »

sweeet

4RunnerChevy · « **Reply #276 on:** Nov 23, 2011, 07:11:26 PM »

Quote from: bigarms23 on Nov 22, 2011, 10:57:33 AM

nice what winch did you get

Its that Smitty. The radiator is that speedway, I welded a heater bung and supports to it. The Long's are the full 30 kit.

Peterbuilt84 · « **Reply #277 on:** Dec 03, 2011, 01:23:29 PM »

New mods look good Kevin $Beer Chug\'n$ making me jealous

What did you use for your front drive shaft spline? Looks different then just a long spine kit.

4RunnerChevy · « **Reply #278 on:** Dec 03, 2011, 06:42:34 PM »

Quote from: Peterbuilt84 on Dec 03, 2011, 01:23:29 PM

New mods look good Kevin $Beer Chug\'n$ making me jealous

What did you use for your front drive shaft spline? Looks different then just a long spine kit.

I used Tractor PTO spline, been working great for years.

Peterbuilt84 · « **Reply #279 on:** Dec 03, 2011, 07:45:48 PM »

Interesting, where did you get it from?

4RunnerChevy · « **Reply #280 on:** Dec 03, 2011, 08:14:16 PM »

Quote from: Peterbuilt84 on Dec 03, 2011, 07:45:48 PM

Interesting, where did you get it from?

C&N out near your area. We are thinking about Hollister 17th&18th, you gonna be around ? and is your rig wheelable ?

Peterbuilt84 · « **Reply #281 on:** Dec 03, 2011, 09:52:23 PM »

Quote from: 4RunnerChevy on Dec 03, 2011, 08:14:16 PM

C&N out near your area. We are thinking about Hollister 17th&18th, you gonna be around ? and is your rig wheelable ?

The one right in Watsonville? It's like 10 min from my house. Is there a specific size, or is it all the same?

I'm coming back the 9th, so Hollister may be a possibility. Still have a lot to get done though.

4RunnerChevy · « **Reply #282 on:** Dec 04, 2011, 06:43:10 AM »

Quote from: Peterbuilt84 on Dec 03, 2011, 09:52:23 PM

The one right in Watsonville? It's like 10 min from my house. Is there a specific size, or is it all the same?

I'm coming back the 9th, so Hollister may be a possibility. Still have a lot to get done though.

Yeah that place, I remember just looking through catalogs. Mines like 1 1/2 x 10 spline or therebouts. Hopefully you can make it.

4RunnerChevy · « **Reply #283 on:** Jan 03, 2012, 06:02:04 PM »

Spinning the axle centering tool. Be done tomorrow.

4RunnerChevy · « **Reply #284 on:** Jan 04, 2012, 04:49:16 PM »

Ok made a centering tool for centering front axle's. Got the dimensions from pbb http://www.pirate4x4.com/forum/showthread.php?t=734345. Removal of the inner seal is required. New seals are good for Marlins business.

Its done, left bushing is the one that goes into axle seals spot, and the right one is a stock spindle bushing. Notice the pressed in aluminum tip, when other people use it they wont f'k stuff up.

, and I needed it for a center.

Oils seal bushing.

Peterbuilt84 · « **Reply #285 on:** Jan 04, 2012, 08:05:33 PM »

That was fast...Looks good

sckid831 · « **Reply #286 on:** Jan 04, 2012, 11:39:17 PM »

hey kevin can you setup gears?

4RunnerChevy · « **Reply #287 on:** Jan 05, 2012, 06:06:21 AM »

Quote from: sckid831 on Jan 04, 2012, 11:39:17 PM

hey kevin can you setup gears?

Yes I can.

4RunnerChevy · « **Reply #288 on:** Jan 14, 2012, 07:30:20 PM »

4RunnerChevy · « **Reply #289 on:** Jan 14, 2012, 07:48:42 PM »

No real damage, an unsecured hammer went past my head and destroyed the passenger side of the windshield.

Hydrolocked, but quickly recovered, and wheeled more. Ran great after, spent most of the rest of the day watching carnage in Tank Trap.

THK Matt · « **Reply #290 on:** Jan 16, 2012, 10:22:40 AM »

saw you post that on FB. ouch dude lol.

russty · « **Reply #291 on:** Jan 19, 2012, 09:34:48 AM »

very nice runner

so did you say that the raditor is from speedway? im swappin in a 4.3 and curious about radiator options.

4RunnerChevy · « **Reply #292 on:** Jan 19, 2012, 04:30:02 PM »

Quote from: russty on Jan 19, 2012, 09:34:48 AM

very nice runner so did you say that the raditor is from speedway? im swappin in a 4.3 and curious about radiator options.

Yeah its a speedway $119, all aluminum. I had to weld in a bung to supply the heater core, and a few brackets. Its actually pretty quality chit, the alloy is good cause the welds went in real nice.

sckid831 · « **Reply #293 on:** Jan 19, 2012, 08:30:59 PM »

what do i need to setup a 4.88 from one housing to another housing?

russty · « **Reply #294 on:** Jan 19, 2012, 10:05:07 PM »

thanx ill check in to it. that sound alot more afordable.

4RunnerChevy · « **Reply #295 on:** Jan 20, 2012, 05:59:20 AM »

Quote from: sckid831 on Jan 19, 2012, 08:30:59 PM

what do i need to setup a 4.88 from one housing to another housing?

are they both 8" ? Then why move them ? If one is bad then you will need a master install kit, the know how, patience, and the right tools.

sckid831 · « **Reply #296 on:** Jan 20, 2012, 09:39:32 AM »

7.5 ifs front 4.88 going into a 7.5 solid axle housing

*** YELLER *** · « **Reply #297 on:** Jan 20, 2012, 09:53:26 AM »

what do I need to set up the air from one tire to another tire

sckid831 · « **Reply #298 on:** Jan 20, 2012, 10:17:42 AM »

your mature

*** YELLER *** · « **Reply #299 on:** Jan 20, 2012, 10:35:50 AM »

Quote from: sckid831 on Jan 20, 2012, 10:17:42 AM

your mature

NO I'M NOT

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

4RunnerChevy [OP]

Related Topics