HELP ME!

[Skinny_Pedal]

hey now my bfg are fine aired down in the mud. i dont have a pic but its very easy to find. go about 6"-12" behind your crossmember. look on the side. you'll c a big nut, thats the nut u turn. also FOLLOW YOUR TORSION BARS BACK . they will lead the way. lol

[Fireimp141]

A sawzaw? not for the inner fenders, im talking about when i turn, not when they are stuffed

[dirtbag]

A sawzaw? not for the inner fenders, im talking about when i turn, not when they are stuffed

you'll rub if you're not lifted, or don't have enough backspacing in your rims ( common is 4 for a 15x10, get some 2's )

[Fireimp141]

I got some 3.5's or 3.75's cant remember, and yes i know im going to run fenders when im stuffed, and ill prolly end up cutting those a weee bit, but im not going to be doing very much flexing, its mainly mudding. but still, are spacers a safe alternative?

[SWAMPER]

For a DD I woulnt go more than 1.5" wheelspacers

[Fireimp141]

Thats what i was thinking bout getting  and today during school it rained, so i took my lunch break to go out real quick  hehe

[Fireimp141]

ok maybe it will post this time! and this is with super crap tread, i cant wait till i get my tires ahhhh!

[Fireimp141]

it was blue now its brown, funny stares from all over the town!  this is a better pic

[SWAMPER]

Man o Man You have got to love the mud I think I will email you when I go there 

[Skinny_Pedal]

yikes thats stocker than my rig! better get moving dude

[Fireimp141]

yes 86, i know, a prob that is plagueing me i just need to get my parents to let me buy the HD torsions, shackles, blocks, ubolts and then do the ! also doing some research, thinking 3" shackles and 2" blocks, with a ubolt flip, then u know HD torsions in the front with about 1.5 inch lift. Gonna prolly cut the fenders, not much but enough for the 33X12.5-15's also gonna get 1.5" spacer for my wheels so they dont rub. and then ill be having some fun! 

[Skinny_Pedal]

your gonna have a little to much lift for 33's back there! your gonna have the bullfrog look!

[SWAMPER]

Why dont you just do a spring over on the rear that way you stay away from blocks...the spring over should give you like 3" of lift 

[Skinny_Pedal]

swamp i really must  . toyotas come stock with leafs sprung over. just not the landcruisers. u may have coils but i cant let it slide

[SWAMPER]

Ah forgive me dear Sir's I am not too familiar with the leaf setup...well in that case just use bigger shackels 





P.S 86Runner for sharing that info you shall get a point 

[Fireimp141]

DAMMIT lol i was gonns say that haha, b*std 86! anyways yah, they are saggy though! they are like flat, and i dont feel like buying new ones, or even add a leaf, so i figured the blocks would compensate for saggy ass

[SWAMPER]

Just go to a shop and have them re-arched!

[Fireimp141]

How much does that cost ya?

[SWAMPER]

Shout I dont know I dont have leafs...I only know that they do that because my POOR friend that had a Zuk had it done

[Skinny_Pedal]

dude u are crazy, dont have them rearched. mine are bowed down as well, but u know what, they flex awesome! go make a big ass shackle

[Fireimp141]

I asked the local custom shop if like 6-7" shackles were bad, and he said ya... so im just gonna get blocks SCREW IT

[SWAMPER]

Shame on you 86Runner its always better to have them nice and arched with no big ol shakels to get hung up on

[brainlessfool]

BIG BLOCKS SUCK!!   (unless we'er talking motors here)

[Fireimp141]

ya but its also like 250$ more haha, unless u know where to get a pair of stock leafs for less than 360$

[Fireimp141]

im not getting big blocks, like 1-2" almost nothing

[brainlessfool]

1" is ok, 2 max.

[Fireimp141]

thats all i want, to cure my saggy ass sendrome

[SWAMPER]

ya but its also like 250$ more haha, unless u know where to get a pair of stock leafs for less than 360$

Junk Yard     

[Fireimp141]

Tell me if this is good for stock rig!

33X12.5-15 on a 15X10 rock crawler rim
1.5" wheel spacers
3-4" shackles
2" inch blocks with u-bolt flip kit
HD torsion bars cranked 1.5"

[Fireimp141]

YA but no one around here has any toyota 4runners, unless u can give me a few types of springs that would fit a stock shackle placement, cause i dun wanna do any welding as of right now... would wagoneers work also? and i know 84-89 4runners, what about p/u's?