Juds One Ton Single Cab

Started by Jud, July 29, 2008, 10:28:19 PM

0 Members and 3 Guests are viewing this topic.

jrock


Slolyfe

Once again. You never cease to amaze me.
You'll never take me alive

lilbuddy

Going to actually upgrade now?
RIP Kyota.... you are the man

GET IT!!!

Jud

I really wanna upgrade to a V8, SM465 and Atlas but I think a cromo output will be cheaper for now...
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

P-DiseToy24


snowshoebrue

jud hey i just bought a bender today,  i only ordered the 1.5 die, but i will probably get a 1.75 in the spring.  nate was asking for your number also.  I didn't have my phone on me so i didn't give it to him.

Jud

Quote from: snowshoebrue on December 03, 2010, 09:51:30 PM
jud hey i just bought a bender today,  i only ordered the 1.5 die, but i will probably get a 1.75 in the spring.  nate was asking for your number also.  I didn't have my phone on me so i didn't give it to him.

Nice! I need a bender soo bad to finish my front end and tube the rear out. I went over to Nates last night for a party, I hadn't seen him forever. Then a bunch of Juniors from Beyer showed up so we left lol
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

snowshoebrue

amanda loves sushi so i see nate all the time.  The bender is a jmr sportsman, they are on sale right now.  the bender and die was only 540 shipped to me. 

Jud

Quote from: snowshoebrue on December 05, 2010, 09:42:24 PM
amanda loves sushi so i see nate all the time.  The bender is a jmr sportsman, they are on sale right now.  the bender and die was only 540 shipped to me. 

Yea he said you two go in there almost every other day. lol Damn, that's pretty cheap.
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

Jud

Well, took these of the the broken rear output and ujoint the other night...









Then pulled my cases this evening and I was right, broken input...

One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

ToYocRawleR

Been there with an output shaft but never an input?? U must of been gettin some!!
-
Rigs:
05 F-250 Powerstroke
93 RunneR ...Build-up  http://board.marlincrawler.com/index.php?topic=85644.0

fortysixandtwo - I drove through Dunsmuir once I dont think anything there is "super nice"
Just kidding man. I guess there is, its your bed

brockbuilt85

is that the crommoly output/input?
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Slolyfe

Quote from: ToYocRawleR on December 07, 2010, 10:42:38 PM
Been there with an output shaft but never an input?? U must of been gettin some!!


Ever seen Jud drive? He is like a wild chimpanzee all hopped up on FourLoko. It's pretty entertaining.
You'll never take me alive

brockbuilt85

Quote from: Slolyfe on December 08, 2010, 01:20:19 PM

Ever seen Jud drive? He is like a wild chimpanzee all hopped up on FourLoko. It's pretty entertaining.
:rofl: so true
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

ToYocRawleR

Quote from: Slolyfe on December 08, 2010, 01:20:19 PM

Ever seen Jud drive? He is like a wild chimpanzee all hopped up on FourLoko. It's pretty entertaining.

Ha Ha !  Thats awesome
-
Rigs:
05 F-250 Powerstroke
93 RunneR ...Build-up  http://board.marlincrawler.com/index.php?topic=85644.0

fortysixandtwo - I drove through Dunsmuir once I dont think anything there is "super nice"
Just kidding man. I guess there is, its your bed

P-DiseToy24

mmmmmmm Loco's.... haha
Them Locos will do the trick thats for sure.

Jud

One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

brockbuilt85

Quote from: Jud on December 08, 2010, 06:51:40 PM
Nope, I wish it was. lol
man, marlin just had a deal if you bought both too! your a day late and a dollar short buddy
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Jud

Quote from: brockbuilt85 on December 08, 2010, 07:55:36 PM
man, marlin just had a deal if you bought both too! your a day late and a dollar short buddy

Meah I think I'm going the TBI V8/SM465/Atlas route...
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

brockbuilt85

Quote from: Jud on December 09, 2010, 10:30:24 PM
Meah I think I'm going the TBI V8/SM465/Atlas route...
CHA CHING!
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

P-DiseToy24

Gotta say I think thats the best way to go.
flopp toy cases no matter how much coin you through at them in the end they will always break.. Might as well just do it the right way the first time and go atlas, klune-v, stak... etc

Jud

Quote from: P-DiseToy24 on December 11, 2010, 06:09:54 PM
Gotta say I think thats the best way to go.
flopp toy cases no matter how much coin you through at them in the end they will always break.. Might as well just do it the right way the first time and go atlas, klune-v, stak... etc

Yea build the :pokinit: out of a Toyota case and you will just shatter the housing...
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

brockbuilt85

Quote from: Jud on December 11, 2010, 06:10:51 PM
Yea build the :pokinit: out of a Toyota case and you will just shatter the housing...
definatly when you wheel like....well you...haha
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Doof

Quote from: Jud on December 09, 2010, 10:30:24 PM
Meah I think I'm going the TBI V8/SM465/Atlas route...

i think im going to run for president... vote for me!!

lilbuddy

RIP Kyota.... you are the man

GET IT!!!

Jud

Tore everything minus the heads off the motor I got from my buddy this evening. It's a SBC350 .030 over with a RV cam that has like 8000 miles on it. I'm going to pick up a TBI SBC350 out of a 91 Chevy pickup from another buddy tomarrow, he's giving me everything including fuel tank, radiator, dash and everything out of the truck. The TBI motor spun 1 or multiple main bearings so I am getting a valve job done on the heads and putting them on the .030 over bottom end. I haven't decided what tranny/case setup I want forsure yet, I'm really debating on a SM465, TH350 or TH400 with some type of setup that will probably include a NP205 behind it. That all depends more on what kind of deals I find.

Motor looks shitty because it's dirty right now, pics are more just proof I am starting this :pokinit:
(those oil cooler lines are in the water pump holes just so they don't leak oil on the ground)


Toyota motor/trans ready to get pulled tomarrow
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"

jrock

Your going to break everything now  :cheese: :cheese:

brockbuilt85

Quote from: jrock on December 19, 2010, 09:24:41 AM
Your going to break everything now  :cheese: :cheese:
ummm, where have you been?
hes been doing that since i knew him.
first time i met jud he had the white 4runner and sent it airborn at carnigie. great first impression, hahaha
When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

kamakazecam

Quote from: brockbuilt85 on December 19, 2010, 10:37:11 AM
ummm, where have you been?
hes been doing that since i knew him.
first time i met jud he had the white 4runner and sent it airborn at carnigie. great first impression, hahaha


4runner? Wasn't it was an Xtra cab!



Jud

Quote from: kamakazecam on December 19, 2010, 12:51:44 PM

4runner? Wasn't it was an Xtra cab!




I had the white Xtra Cab and the faded to flopp Silver Runner, kinda looked white.
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"